my atom life got problem after install chinese support.
How to re-format my atom life..
or any solution to solve it..
Try this:
"To perform a hard reset, use the stylus while pressing into the reset hole, press the power on/off button at the same time. Screen will prompt you to press the Green call and Red end call button together to confirm on hard resetting the device. *Note: Hard resetting the device will cause the device to be reset back to its original factory default settings and all data will be lost."
i alr try it, but no working.. cant restore to normal.. i think i need send to service centre, by the way how to register warrantry..
stephenfei said:
i alr try it, but no working.. cant restore to normal.. i think i need send to service centre, by the way how to register warrantry..
Click to expand...
Click to collapse
Try flashing the ROM. Search for Medkid's, TranMinhMan, aa125690's ROM for flashing.
Related
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
jimtoyz said:
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
Click to expand...
Click to collapse
In my experience, what you describe is very normal . The RUU seems to stop at 80% and again at 95%. So far nothing out of the ordinairy.
But after that the device should start up and reconnect with ActiveSync. When it tries to pair choose "connect without setting up your device" (or something like that, I'm translating from dutch). After that, it should be no problem to run Upgrade.bat from the WM6 ROM of your choice.
For more detailed describtion, read the upgrade guide.
try any of this roms (http://forum.xda-developers.com/showthread.php?t=316062)... maybe you have spl 3.08???
it's not that..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
another possibility
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
It lookslike something is screwed-up... And I agree with you that the cam-buttonis most likely... Succes anyway
jimtoyz said:
another possibility is that my camera button is always pressed and therefore i need only press comm button and soft reset to get into hard reset screen?
i'm gonna check after work today..
Click to expand...
Click to collapse
i think your camera button connection is short (always pressed down) if you get to hard reset screen by only pressing the comm manager button.
hmm...
too bad..yesterday the technician was out of tow..think i'll go there again this afternoon after work..
wish me luck..
NVID Success
I've got the camera button fixed, and i've flashed the NVID rom succesfully!
i'm now in the process of flashing the Transformer 1.0 by Cloudyfa..
All the best to me!
it's done!
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
jimtoyz said:
it's done!!!
it's fixed!!!
HOOORRRRAAAAAYYYY!!!!!!!!!!!!!
Thanks for everybody who tried to help me!
Terima Kasih!*
*thank you in indonesian language
Click to expand...
Click to collapse
CONGRATULATIONS!!
Complete noob here.
I was installing the HTC Home Customizer on my new HTC Touch Pro phone and there was a problem with the installation that caused me to reset the phone. Well, now the phone won't reboot!! It hangs right after Windows Mobile 6.1 loads.
How do I fix? Can I reinstall WM6.1, or can I flash a ROM? All information I've seen for doing this requires ActiveSync to be working. I can't get the phone booted far enough to get it ActiveSync to work.
Please don't tell me I've bricked my phone!
Can you at least attempt a hard reset?
LordLugard said:
Can you at least attempt a hard reset?
Click to expand...
Click to collapse
Do you mean, yank the battery out and then reboot? If so, yes I've tried that.
Okay, I found the wiki explaining what a Hard Reset is.
Negative. Holding VOLUME DOWN and CENTER buttons while RESETTING the phone does not help. Still locks up immediately after you hear the tone played at the Windows Mobile Boot screen.
Other suggestions?
Looks like I forgot the part about holding the Power button while doing a Hard Reset.
Doing a Hard Reset correctly, did fix my problem. THANKS GUYS!!!
ignisuti said:
Looks like I forgot the part about holding the Power button while doing a Hard Reset.
Doing a Hard Reset correctly, did fix my problem. THANKS GUYS!!!
Click to expand...
Click to collapse
Ah ha, you owe me LUNCH !!!
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Thank you for the advice.
Thanks for help
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
fantomel said:
Here's how to 'hard reset' your TG01!
- Power off device
- Hold down 'volume up' and 'camera' buttons
- Press power button
- Follow on screen prompts
Sorted!
Original thread: Modaco forum
Click to expand...
Click to collapse
elder T said:
Thank you for the advice.
Click to expand...
Click to collapse
bassam777 said:
Thanks for help
I've followed your instructions and succeeded 100%
Best Regards,
Bassam
Click to expand...
Click to collapse
DeeJay05 said:
how long will the toshiba logo stay?
edit:
ok after hard reset i have to do the short pin method
thanks anyway
Click to expand...
Click to collapse
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
drupad2drupad said:
What about 'Master Reset' option in settings where you enter you pin i.e. 1234, press 'reset' and it hard resets the phone? :s
Click to expand...
Click to collapse
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
olyloh6696 said:
This is if you have a unbootable phone that cant get into windows. the only option is to use this method
Click to expand...
Click to collapse
yea it erase the nand flash like a format and the the drive is real clean and only toshiba logo is displayed
shahryarkh said:
hi
emergency PLEASE help me
i lost my tg01 boot i cant hard reset and pin flash
Click to expand...
Click to collapse
read this:
tg01 two brick variants how to unbrick
and do this:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
* if red led not flash- use TG Downloader unbrick method with user manual in german (pls translate with google translator for other languanges)
contains: TG01 Downloader TG01 Driver TGTool
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
Click to expand...
Click to collapse
If a soft reset doesn't work then hard reset, hopefully you installed from a fresh rom flash/hard reset anyway?
warcaller said:
guys .. need a little help ... i installed tf 3d and when i restarted .. the phone just stands at "starting windows" .. any advice?
edit:
so i tryed to enter boodloader but no success what so ever .. eventually i used short pin method .. oh.. and i must say it was a breath taker ... now the phone works ok ...
Click to expand...
Click to collapse
tf3d never causes me any of these problems, what ROM were you on?
Thank you
... this saved my Day.
I wasn't able to do a Master Reset after Flashing.
OK, so after trying out the last android build from Markinus, winmo is now saving text messages to the SIM.
If I do a 'hard' reset, what will I lose on my phone? (contacts/texts/email setup etc??). Please explain the downside of hard reseting. Thanks! (or basically.. will I need to save/backup anything before hard resetting?)
Also: Will it remove the 'unlock' that I have applied to my phone?
Update: Well I did it anyway. Saved my contacts, but that's about it lol. Hopefully this will get my messages to saving back into memory rather than onto the sim.
I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614
Hello,
Sorry for my bad English, I have a problem with my samsung sII, by mistake I wanted to install a ROM s1 galaxy I did not see that this is the S1 and not S2 Rom
Fortunately, the ROM is not installed and the phone got stuck in the download menu, after 15 minutes I turned off my phone and he wants to turn on , I try to start it in normal mode and download mode but nothing happens
it mean that my phone is dead or it There's a solution?
Thank you in advance
From what i have heard you hard brick your phone if you try to flash i sgs1 rom on a sgs2 phone.
JTAG service should fix it.
I can really recommend this service, very helpful personel:
http://www.mobiletechvideos.com/blog/
Can you get it into download mode with a jig?
Sent from my GT-I9100 using XDA Premium App
I will see that, tnx for your answers gays
bouighil said:
I will see that, tnx for your answers gays
Click to expand...
Click to collapse
HAHAHAHAHA you just made my day. learn english dude you could get in some bad situations
bouighil said:
I will see that, tnx for your answers gays
Click to expand...
Click to collapse
LMAO
I think if you flash a SG1 rom your phone will die.
bouighil said:
I will see that, tnx for your answers gays
Click to expand...
Click to collapse
It's guys not gays
Sent from my GT-I9100 using xda premium
Here we go... Another SGS1 flash on S2.
Bricked.
GG.
Send it back to sammy and tell them u plugged it to ur wall charger and it died.
As mentioned if you flash an SGS 1 ROM w/ Pit to the phone, it will brick it and require JTAG if it won't power up:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-jtag-brick-repair/
Thanks for the reference guys...I mean gays...
loooool, sorry guys, and tnx for your answers, i hope that JTAG will repair my phone, i miss my Samsung
Try This:
If you think your phone may be bricked and wont turn on, try a soft reset (possibly followed by a hard reset)
1. Take out the battery, then press and hold the ON button for about 10 seconds or so. Replace the battery, then press ON button to try to switch on. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits.
2. If this does not work, do as above but after inserting the battery, press and hold the ON+HOME buttons at the same time for 10 seconds or so again. This is a hard reset, and works best if done after a soft reset, so always try the soft reset first.
extract1 said:
Try This:
If you think your phone may be bricked and wont turn on, try a soft reset (possibly followed by a hard reset)
1. Take out the battery, then press and hold the ON button for about 10 seconds or so. Replace the battery, then press ON button to try to switch on. This is a soft reset, and wipes the temporary memory and empties all remaining power in the circuits.
2. If this does not work, do as above but after inserting the battery, press and hold the ON+HOME buttons at the same time for 10 seconds or so again. This is a hard reset, and works best if done after a soft reset, so always try the soft reset first.
Click to expand...
Click to collapse
It doesn't work
bouighil said:
I will see that, tnx for your answers gays
Click to expand...
Click to collapse
Funniest post ever!!!~
s2d4 said:
Funniest post ever!!!~
Click to expand...
Click to collapse
cant stop laughing...poor gay(guy hehe