I was wondering if anyone here has successfully integrated (OEM'd) their carrier cab into DCD's Kitchen.
I'm trying to do it with 3.2.4 (fixed most of the bugs), but it doesn't do anything other than import the registry entries and create the EPSTLab link. (Verizon Carrier Cab)
The carrier OEM's were taken out of the kitchen after 3.0.4 and made into the carrier cabs. Your best bet is to just stick with the carrier cab. Is it that hard to install one cab after flashing? If your response is "Well, I have lots of cabs to install after flashing...", then my answer to you would be...USE UC
gc14 said:
The carrier OEM's were taken out of the kitchen after 3.0.4 and made into the carrier cabs. Your best bet is to just stick with the carrier cab. Is it that hard to install one cab after flashing? If your response is "Well, I have lots of cabs to install after flashing...", then my answer to you would be...USE UC
Click to expand...
Click to collapse
Nah, I don't mind installing it. I just like to try to simplify and customize the ROM as much as possible.
So it was indeed used before and just removed?
Hrmm, I'll have to look into it.
Thanks for that info.
gc14 said:
The carrier OEM's were taken out of the kitchen after 3.0.4 and made into the carrier cabs. Your best bet is to just stick with the carrier cab. Is it that hard to install one cab after flashing? If your response is "Well, I have lots of cabs to install after flashing...", then my answer to you would be...USE UC
Click to expand...
Click to collapse
I have a dumb question ya imagine that.....anyway
1) why did he take the mms config out
2) have there really been that many changes to the cab as opposed to the OEM since 3.0.4
So it was indeed used before and just removed?
Click to expand...
Click to collapse
Yes, all carrier OEM's were included in kitchens 3.0.4 and before. They were removed to make a generic multi carrier rom for everyone. Before, there would be a link to the kitchen, then links to pre-cooked roms for every carrier...totalling around 50mb each. Much easier to link the kitchen and one pre-cooked rom, then just link small carrier cabs.
I have a dumb question ya imagine that.....anyway
1) why did he take the mms config out
2) have there really been that many changes to the cab as opposed to the OEM since 3.0.4
Click to expand...
Click to collapse
1. MMS was removed completely because it's not an OEM package.
2. Yes there have been several significant changes since the OEM.
gc14 said:
1. MMS was removed completely because it's not an OEM package.
2. Yes there have been several significant changes since the OEM.
Click to expand...
Click to collapse
Hmmm so with that being said I should most likely quit using the OEM from 3.0.4 I know you just rolled your eyes. By the way, I still OEM MMS and other stuff. Guess I need to come out of the stone ages. But then again I just finally upgraded from 3.0.4. I just liked it so much with the configuration I ran and it was soooooooo stable.
Damn son, yeah look into UC or something and get up to date. You must be using an old version of Arcsoft too huh?
I was just thinking about this topic.
I had already found the UC and am trying to figure out all that stuff too.
Glad to know I was on the right path for once.
gc14 said:
Damn son, yeah look into UC or something and get up to date. You must be using an old version of Arcsoft too huh?
Click to expand...
Click to collapse
Hmmm ya, I'm not one who needs the newest software. Normally I let yall fix all the bugs first . I know all about UC and have actually helped a few friends with theirs but I just never ventured off onto my own UC. I'll still probably wait for 3.2.5 before I do anything. Then will most likely allocate on of my cards just for flashing and UC.
Yeah, my Verizon MMS cab works perfectly and is the latest "released" version of Arcsoft. Throw that in your UC config and you'll be good.
gc14 said:
Yeah, my Verizon MMS cab works perfectly and is the latest "released" version of Arcsoft. Throw that in your UC config and you'll be good.
Click to expand...
Click to collapse
Ya I messed with it when you released it and then again the other day when I finally decided to upgrade ROM's. Maybe it's a placebo affect but I seem to have more free ram and better stability when I OEM instead of cab. Then again I could just simply out of my friggin mind
gc14 said:
Yeah, my Verizon MMS cab works perfectly and is the latest "released" version of Arcsoft. Throw that in your UC config and you'll be good.
Click to expand...
Click to collapse
One last question........ "clears throat"
When you gonna quit bogarting the new verizon beta rom...huh....huh.....huh ??????
lllboredlll said:
One last question........ "clears throat"
When you gonna quit bogarting the new verizon beta rom...huh....huh.....huh ??????
Click to expand...
Click to collapse
hahahahahahaha.
sorry, needed to get that out
Ya I messed with it when you released it and then again the other day when I finally decided to upgrade ROM's. Maybe it's a placebo affect but I seem to have more free ram and better stability when I OEM instead of cab. Then again I could just simply out of my friggin mind
Click to expand...
Click to collapse
I believe it's just placebo as you said.
One last question........ "clears throat"
When you gonna quit bogarting the new verizon beta rom...huh....huh.....huh ??????
Click to expand...
Click to collapse
First, it's the ship rom, not beta. Second, if it was my choice, it would have been posted for everyone on the day I got it. I will not leak it without permission from my source, and as of now, I don't have permission. Also, nothing from it is being used in any of dcd's stuff until it's officially released or I get permission to post it, so put that rumor to bed.
I can however say that with it comes a new version of Arcsoft that will work for both Verizon AND Alltel. It's build 5.0.70.24 and NO it will not work on Sprint, so don't bother asking lol. It also includes a built in application to turn threaded messaging on and off and a new PRI 2.03_002. It obviously includes EVDO Rev A support.
I'm not going to go into great detail regarding GPS, but all I'm going to say is...though the potential is now there, it's STILL going to be some work to get it to work like Sprint's, and may not even be possible at all...but we shall see. You can all thank Verizon for that.
2 questions
what is this "UC" you speak of, and how do you use it?
if i have .cab for my programs can i just extract the cab to a folder then put that in the OEM folder for the kitchen and have the kitchen build with all my progs? does it work like that or is there more to it?
2 questions
what is this "UC" you speak of, and how do you use it?
if i have .cab for my programs can i just extract the cab to a folder then put that in the OEM folder for the kitchen and have the kitchen build with all my progs? does it work like that or is there more to it?
Click to expand...
Click to collapse
If you look at every new kitchen post, you'll see posted right at the top under features, UC Compatible, with a link....looks like someone doesn't read the kitchen posts...
and
No, it doesn't work that way at all.
UC compatibilty
Check out this link: http://forum.xda-developers.com/showthread.php?t=366337&highlight=reg+xml+tool
Worse case just do the SDConfig.txt file with all the cabs you need to install and you are more than half way there to where you left off on the phone.
gc14 said:
I believe it's just placebo as you said.
First, it's the ship rom, not beta. Second, if it was my choice, it would have been posted for everyone on the day I got it. I will not leak it without permission from my source, and as of now, I don't have permission. Also, nothing from it is being used in any of dcd's stuff until it's officially released or I get permission to post it, so put that rumor to bed.
I can however say that with it comes a new version of Arcsoft that will work for both Verizon AND Alltel. It's build 5.0.70.24 and NO it will not work on Sprint, so don't bother asking lol. It also includes a built in application to turn threaded messaging on and off and a new PRI 2.03_002. It obviously includes EVDO Rev A support.
I'm not going to go into great detail regarding GPS, but all I'm going to say is...though the potential is now there, it's STILL going to be some work to get it to work like Sprint's, and may not even be possible at all...but we shall see. You can all thank Verizon for that.
Click to expand...
Click to collapse
lol oh I didn't hear any rumor I seen your post with a so called application downloading a so called file... but either way I respect your integrity on the matter... nice to see people around like that
gc14 said:
If you look at every new kitchen post, you'll see posted right at the top under features, UC Compatible, with a link....looks like someone doesn't read the kitchen posts...
and
No, it doesn't work that way at all.
Click to expand...
Click to collapse
wow i never noticed that was a link
thanks for the tip!
Related
ROM's bult using no2chems work.
BEWARE YOU MUST WRITE DOWN YOUR SETTINGS OR YOU WILL BE ON THE PHONE WITH YOUR CARRIER.
VZW USERS THIS FLASH WILL CAUSE YOUR PHONE TO BECOME UNVALIDATED.
You must have the latest radio installed and your device must be unlocked. Radio and Unlocker can be found here. http://forum.ppcgeeks.com/showpost.php?p=209996&postcount=2
If you are not a sprint customer do not allow the above flash to boot when u hit the calibration screen u must put your device into bootloader mode and flash your rom of choice.
If you are a Verizon customer doing this will require u to call Verizon and get a new akey this is easily obtained.
Updated 3-23-08 4:32pm
Remember USE AT YOUR OWN RISK...
Verizon / Sprint / Alltel / Telus / USCellular / Qwest / BellMobility.
All ROM's can be found here http://nex.ppckitchen.org/ROM in there respective folders.
All apps fully up to date to the best of my knowledge if not please post current and I will update in next release.
When it asks about customizations only install adhoc.cab unless u see a program u need.
Assuming this is for verizon. Phone is unlocked with Olipro 2.40, but have been waiting to figure out whether those with problems just aren't flashing right, or whether there are real problems with 3.16. List looks good and I'd be willing to try it- any chance of adding vzw wireless sync?
Im down to build it in if possible just need the .cab I am a exchange user so I never even thought of it I may actually have the .cab
EDIT: Got wsync grabbed from ext rom building it now then I will test it if nothing else I can make it install on a post.
I can get it to you if you need it, but not until tomorrow. In the meantime, the website is http://ota.wsync.com, which has download links to wsync for the different vzw phones.
as stated in other post...i wouldn't mind grabbing that kitchen you've adapted (i have sprint...i've constantly tried o piece together a working kitchen..but i keep getting some damn errors)...looks like a fire ass rom though..good stuff
cheeb said:
as stated in other post...i wouldn't mind grabbing that kitchen you've adapted (i have sprint...i've constantly tried o piece together a working kitchen..but i keep getting some damn errors)...looks like a fire ass rom though..good stuff
Click to expand...
Click to collapse
So u want the kitchen minus the OEM's keep in mind this is for Verizon I can make u for sprint if u want?
absolutely dude....i have oems i can use.....i would definitely appreciate that dude
cheeb said:
absolutely dude....i have oems i can use.....i would definitely appreciate that dude
Click to expand...
Click to collapse
Hey -- once you get this bad boy going with your kitchen. I would love to get my hands on it too. I am Sprint here as well.
Are you on the new version currently? Are you having any data load (EVDO) issues? Mine were so bad I finally downgraded.
But now I feel lonely and want to join the party again if I can get the data to work correctly.
quantumforce1 said:
Hey -- once you get this bad boy going with your kitchen. I would love to get my hands on it too. I am Sprint here as well.
Are you on the new version currently? Are you having any data load (EVDO) issues? Mine were so bad I finally downgraded.
But now I feel lonely and want to join the party again if I can get the data to work correctly.
Click to expand...
Click to collapse
Ok I tried to build in the Wireless sync and I got it in but I am getting connection issues the wsync cab seems very entailed I am thinking a post installer would be best for use with that particualr program.
Will make it with a post and upload shortly.
quantumforce1 said:
Hey -- once you get this bad boy going with your kitchen. I would love to get my hands on it too. I am Sprint here as well.
Are you on the new version currently? Are you having any data load (EVDO) issues? Mine were so bad I finally downgraded.
But now I feel lonely and want to join the party again if I can get the data to work correctly.
Click to expand...
Click to collapse
lol...thankfully i haven't had the same issues with evdo...however...i did do an ota after i loaded up the new rom....start...setting...phone...menu....option....setting...internet....get settings...run iota....that usually reprovisions the internet to get working
quantumforce1 said:
Hey -- once you get this bad boy going with your kitchen. I would love to get my hands on it too. I am Sprint here as well.
Are you on the new version currently? Are you having any data load (EVDO) issues? Mine were so bad I finally downgraded.
But now I feel lonely and want to join the party again if I can get the data to work correctly.
Click to expand...
Click to collapse
Not having any data issues as of yet about to make the sprint version for u guys.
Yes this is the latest version with GPS working I have verified it in TomTom iGuidance and google maps.
Ok I got W.Sync working via post install without a problem will post link in first thread shortly.
Also uploading Sprint Kitchen as we speak for those who asked. - No OEM's
Could you package up your kitchen?
NexVision said:
Ok I tried to build in the Wireless sync and I got it in but I am getting connection issues the wsync cab seems very entailed I am thinking a post installer would be best for use with that particualr program.
Will make it with a post and upload shortly.
Click to expand...
Click to collapse
sweet........
c0mputerp0et said:
Could you package up your kitchen?
Click to expand...
Click to collapse
this just coming from myself, im not sure how Nexvision feels, but at this point there isnt a kitchen stable enough to release publiclly. my kitchen that ive been using is basically hacked together, i have a lot of extra steps right now to get it to build my custom roms that ive been releasing, and im not sure how clean nexvision's kitchen is, especially if it is built off my rom as soon as a good kitchen gets put together, im sure someone will release it
cheeb said:
lol...thankfully i haven't had the same issues with evdo...however...i did do an ota after i loaded up the new rom....start...setting...phone...menu....option....setting...internet....get settings...run iota....that usually reprovisions the internet to get working
Click to expand...
Click to collapse
Yeah -- trust me -- I did the same thing.
Over the course of the last 3 or 4 days, I have probably loaded and reloaded my phone no less than 6-8 times. Playing around and doing test. That is why I knew (maybe ignorance really would have been more bliss) that the data throughput with 3.16 was was worse (at least for me) then with 2.17.
But -- ohhh how I really liked 3.16. Seemed much more stable. And DCD's build (although did have some bugs) was really nice too.
fallingup said:
this just coming from myself, im not sure how Nexvision feels, but at this point there isnt a kitchen stable enough to release publiclly. my kitchen that ive been using is basically hacked together, i have a lot of extra steps right now to get it to build my custom roms that ive been releasing, and im not sure how clean nexvision's kitchen is, especially if it is built off my rom as soon as a good kitchen gets put together, im sure someone will release it
Click to expand...
Click to collapse
true...well...theres clearly something 'stable' enough that a couple of people have pieced together a rom (like you have apparently)...others (such as myself) would like to build something to their own liking (similar to what you've probably done and nex...and a host of others) but are not as 'sophisticated' to piece all the parts accurately (i've tried...but i just can't quite get it)....now i'm sure you may feel a little uneasy ("...especially if it is built off my rom....")...but do allow others to possibly benefit from dudes like yourself and nex and a host of others...as you have probably benefited from others whom you put your kitchen together by......i absolutely can't wait for a stable rom kitchen (which we'll all be using soon i'm sure)....till then...lets all eat
cheeb said:
true...well...theres clearly something 'stable' enough that a couple of people have pieced together a rom (like you have apparently)...others (such as myself) would like to build something to their own liking (similar to what you've probably done and nex...and a host of others) but are not as 'sophisticated' to piece all the parts accurately (i've tried...but i just can't quite get it)....now i'm sure you may feel a little uneasy ("...especially if it is built off my rom....")...but do allow others to possibly benefit from dudes like yourself and nex and a host of others...as you have probably benefited from others whom you put your kitchen together by......i absolutely can't wait for a stable rom kitchen (which we'll all be using soon i'm sure)....till then...lets all eat
Click to expand...
Click to collapse
well, like i said, i have to change something different each time, and try flashing a lot of times to get a stable rom. my rom may only be on r3, but i have made at least 25 roms, 22 of which didnt work in some way or another. Just give it a couple of days, or maybe nex's kitchen is clean enough to release. im not super experienced, just enough of a hacker to piece a kitchen together and get a rom put together. i am working on making it carrier independant right now, and that is the last major step for me to release mine.
Post 1 w.sync is up.
NexVision said:
Post 1 w.sync is up.
Click to expand...
Click to collapse
More info please:
quantumforce1 said:
More info please:
Click to expand...
Click to collapse
Same rom just has wireless sync post installer for those who want it.
Peeps - There in an Official Kitchen.... It has been released by the FINE folks over at
http://www.ppckitchen.org/
Please check it out....
Thx to all those responsible for this release.... You are very exceptionally talented people to whom we owe a debt a gratitude too.....
What are the advantages/disadvantages of using this kitchen over DCDs 3.0.1?
Isnt this an Apache kitchen?
Looks like the apache kitchen. Which reminds me how slow that PPC used to be. Then last night, I was playing around with the Touch. No keyboard was horrible, but it was so much faster. Didn't suffer from memory problems. If only the Mogul had 128 MB ram...
Titan compatible or NOT?
azclown said:
Peeps - There in an Official Kitchen.... It has been released by the FINE folks over at
http://www.ppckitchen.org/
Please check it out....
Thx to all those responsible for this release.... You are very exceptionally talented people to whom we owe a debt a gratitude too.....
Click to expand...
Click to collapse
Ok, have you used this to build a rom for the titan? it only builds for apache, one good thing though, I'm able to get updated and new oem's which I'm able to use in DCD's kitchen.
wondabwoy said:
Ok, have you used this to build a rom for the titan? it only builds for apache, one good thing though, I'm able to get updated and new oem's which I'm able to use in DCD's kitchen.
Click to expand...
Click to collapse
I have been following this it is supposed to eventually be a universal kitchen for multipple devices, checking it out tonight perhaps they have included the titan now.
Yup, looking at their main page they are thanking No2Chem for the titan kitchen, looking to see if I can find it now, perhaps DCD will be releasing his a compatible version of his kitchen, he and No2Chem seem pretty tight.
EDIT: Not quite ready for Titan yet here is a chat transcript from their chatroom>
<jjlwork> I noticed you are thanking no2chem for the titan kitchen, but i do not see anywhere to d/l throguh the updater, am I missing something?
<naigaman> jjlwork we are working on releasing that soon
So stay tuned!
It looks like a pretty intuitive kitchen, I hope we can get it released for the Titan, but until then DCD all the way.
If you read the full article HERE, You can see the dropdown box for what device your cooking for - I'm assuming there's a Titan device available, as dcd is listed in the credits aswell. In anycase I can't wait to try it tonight when I get home!
Jaquers said:
If you read the full article HERE, You can see the dropdown box for what device your cooking for - I'm assuming there's a Titan device available, as dcd is listed in the credits aswell. In anycase I can't wait to try it tonight when I get home!
Click to expand...
Click to collapse
Don't waste your time, titan is not an option yet.
Damm, finally got back to my PC after the updater finished and alas....... IT IS NOT FOR THE TITAN.... When I read the read more section, down at the bottom I saw it say No2Chem for Titan Kitchen and bout pissed myself... SORRY to everyone who got too excited by my overzelous post........
jjlwork said:
Don't waste your time, titan is not an option yet.
Click to expand...
Click to collapse
Damn, that sucks. I went and got all excited... Really the only functionality I want from that is the ability to change the boot & splash screens.
Just recently coming from the 6700/Apache camp I can tell you how much I MISS the Apache kitchen. It was nothing short of a ROM addicts dream...
I got kind of spoiled using the kitchen and the Apache. Yeah, the 6700 was a somewhat limited device compared to the 6800 but it's the Kitchen that really made it compelling and seriously, probably kept it going for so long (and still going...)
Hopefully the Mogul development will eventually get there, but for now you can always dream....
i actually just spoke with gguruUSA and he said that the noChem's titan kitchen has been implemented, but the only delay is with the release of the new official rom, so they're working to make everything compatible. So, hopefully soon we'll be cooking roms apache style.
Jaquers said:
i actually just spoke with gguruUSA and he said that the noChem's titan kitchen has been implemented, but the only delay is with the release of the new official rom, so they're working to make everything compatible. So, hopefully soon we'll be cooking roms apache style.
Click to expand...
Click to collapse
I don't know if anyone cares, but it seems there is now a version for the Titan.
juneau_shublik said:
I don't know if anyone cares, but it seems there is now a version for the Titan.
Click to expand...
Click to collapse
It's No2chem 5060 (very nice), updated PPCGeeks_OEM.rar, and updated Shareware_OEM.rar.
You can find HERE the IRUS tools and HOW TO build your own ROM
http://forum.xda-developers.com/showpost.php?p=2176131&postcount=3
Very fine tools
I hope my internet will be fixed eventualy, so I can download this tools to try it. It is a time to learn something new.
Tadeusz said:
I hope my internet will be fixed eventualy, so I can download this tools to try it. It is a time to learn something new.
Click to expand...
Click to collapse
thats the spirit, if you have any questions just post'em
I'd actually consider downloading this, but I tend to be pretty picky about knowing where all the files came from and what changes were made, so I'll probably stick with my own kitchen I'm futzing around with. I'll take a peek, though, and I might be able to suggest a change or two if I notice things I've figured out that you've not yet implemented yet.
Sogarth said:
I'd actually consider downloading this, but I tend to be pretty picky about knowing where all the files came from and what changes were made, so I'll probably stick with my own kitchen I'm futzing around with. I'll take a peek, though, and I might be able to suggest a change or two if I notice things I've figured out that you've not yet implemented yet.
Click to expand...
Click to collapse
Why don't you also post your kitchen and instruction on how to use it too?
eaglesteve said:
Why don't you also post your kitchen and instruction on how to use it too?
Click to expand...
Click to collapse
You want the honest truth? A couple of reasons.
In order to have something that I'd feel comfortable with other people using, it would require several more weeks of futzing around with the files. I've already been at this for almost three weeks now, and I'm tired of using my HTC Typhoon. I want my real phone back (since the Athena >>> Typhoon).
The final ROM that I'll be using won't match the ROM that other people will be using, period. It's because I'll be putting some of the software that I've bought into my ROM, and putting in some hard-coded dependencies upon those (since there are some interesting things here and there you can do).
I hate doing support. For which I heartily applaud irus, since he's been single-handedly patiently trying to help everyone who's been using his ROM. Pawel was doing the same for a while, albeit a little less patiently, although I don't know where he's disappeared off to recently.
There are probably other reasons as well, but those are the ones I can think of for now. I mean, if there's truly interest, I can see what I can do, but one of the other things that bit me the last time is that I don't want to debug things alone again - the last time, it sucked well over a month from my life to handle all that.
Anyways, this is the thread for the IRUS ROM Kitchen, not the maybe Sogarth ROM kitchen, so I'll leave it at that.
What about mixing Chinese with new Irus one?
I wonder if there could be a way to mix Irus rom with this Chinese one to get a new WWE version based on the newest built and fastest up to now?
It should not be e big problem to put mui files from Irus kitchen into Chinese rom and change a mui to English. There is a reg key setting language for the rom. Irus knows it better then me, anyway.
Unfortunately I can't download anything from rapidsare nor from megaploads because of me being behind a proxy of my 3G network.
Irus, if you could upload your kitchen on my eurotelefon server, then I could get it here and start learning. Today I have some work to do yet, but maybe later I could start.
Edit:
We have to test new rom of Irus first, and then compare it with the Chinese version. It could be very interesting. Steve has very good experience with this Chinese rom so we eventually could use it in future works. Of course we need to ask for the permission, but I am sure the Chinese producer can be proud of his work and let us use it to build something new on it. This is how the development goes, anyway.
Sogarth said:
You want the honest truth? A couple of reasons.
In order to have something that I'd feel comfortable with other people using, it would require several more weeks of futzing around with the files. I've already been at this for almost three weeks now, and I'm tired of using my HTC Typhoon. I want my real phone back (since the Athena >>> Typhoon).
The final ROM that I'll be using won't match the ROM that other people will be using, period. It's because I'll be putting some of the software that I've bought into my ROM, and putting in some hard-coded dependencies upon those (since there are some interesting things here and there you can do).
I hate doing support. For which I heartily applaud irus, since he's been single-handedly patiently trying to help everyone who's been using his ROM. Pawel was doing the same for a while, albeit a little less patiently, although I don't know where he's disappeared off to recently.
There are probably other reasons as well, but those are the ones I can think of for now. I mean, if there's truly interest, I can see what I can do, but one of the other things that bit me the last time is that I don't want to debug things alone again - the last time, it sucked well over a month from my life to handle all that.
Anyways, this is the thread for the IRUS ROM Kitchen, not the maybe Sogarth ROM kitchen, so I'll leave it at that.
Click to expand...
Click to collapse
Ready to change the 3d into something different....
Tadeusz said:
I wonder if there could be a way to mix Irus rom with this Chinese one to get a new WWE version based on the newest built and fastest up to now?
It should not be e big problem to put mui files from Irus kitchen into Chinese rom and change a mui to English. There is a reg key setting language for the rom. Irus knows it better then me, anyway.
Unfortunately I can't download anything from rapidsare nor from megaploads because of me being behind a proxy of my 3G network.
Irus, if you could upload your kitchen on my eurotelefon server, then I could get it here and start learning. Today I have some work to do yet, but maybe later I could start.
Edit:
We have to test new rom of Irus first, and then compare it with the Chinese version. It could be very interesting. Steve has very good experience with this Chinese rom so we eventually could use it in future works. Of course we need to ask for the permission, but I am sure the Chinese producer can be proud of his work and let us use it to build something new on it. This is how the development goes, anyway.
Click to expand...
Click to collapse
i took a brief shoot as i have never done a language swap before and it did not work i will consider it but im still fussing around with new bt stack so people can send files back and forth between phones and laptop and phone. that is the last thing i need to do to make my rom complete. i will want a monday release as i said i would release on monday and i don't like being late. but on the other hand the chinese rom works better at transferring files so if this becomes a dead end then i might have no choice but to push back the release date and work with the chinese rom. i will make an official announcement tomorrow night
Sergiopi,
Please see my post on the Chinese ROM thread regarding caution in using this download.
irus,
This looks like a user friendly tool, but I've a question at the stage where we're looking at the dump: How do you go about finding out which pieces are for which ? Is there a website to go to in order to make sure we're removing the right thing? Or is it a trial and error kind of process? If I want to extract out the new cotact application from a newer ROM, for example, how do I know what the pieces are?
eaglesteve said:
irus,
This looks like a user friendly tool, but I've a question at the stage where we're looking at the dump: How do you go about finding out which pieces are for which ? Is there a website to go to in order to make sure we're removing the right thing? Or is it a trial and error kind of process? If I want to extract out the new cotact application from a newer ROM, for example, how do I know what the pieces are?
Click to expand...
Click to collapse
to me i think the easiest way, if you upgrading the app, is to look and see what files are in the new app and just replace the old. you could make packages but then you have to make a rom folder and xip subfolder and IMO buildos is sometimes picky about reg entries. so the best way is to just replaces the files in the dump folder and then edit the hv and if needed the inflashfiles.dat
This is also in conjuction with eaglesteves previous question.
So I do all of the 'editing' of the ROM in the dump folder right? Second, what if I want to remove entire program, is there an easy to extract 'everything' and its components from the ROM? For instance, what if I want to remove the calculator and put in a freeware calc. do I just remove the calculator folder or is there more to this process?
In the ROM that I'm editing...really just for experiment....I want to remove alot of things and add some, and see if I can put it back together.
I hope this makes since.
Thanks Irus for a good tutorial.
Kenjari
Need help for Exract Bluetooth stack and wireless manager from Taxist V10 rom
Hi
Anyone please help me to extract Bluetooth Stack and the wireless manager from taxist V10 rom.
Just i need to know that which files are needed for Bluetooth Stack and Which files for wireless manager.
I have seen the files in the os.nb but i do not know which files for the bluetooth and wireless.
Thanks in advance.
I downloaded the instructions but for some reason, it can't be read with any of my programs even Microsoft Word.
If I want to extract a particular file off from a WM6.1 RUU_signed.nbh file, which of the included programs should I use?
I tried Scoter Kitchen, but it does not read .nbh files.
NetCF3.5 OEM?
Hi Irus,
I was trying to get an OEM for NETCF3.5 from your FULL ROM using Sogarth kitchen, but with no joy.
Could you suugest any place I could look for it? The same for FTouch?
Mirror (thanks kevank)
Mirror (thanks bradtrump)
Mediafire
Rapidshare.com
Still CE OS 5.2.19208 Build 19208.1.0.2
thats what im talking about
mirror
http://www.mediafire.com/?my1dnkdm1nz
NO FREAKIN WAY! your awesome DCD!
dcd1182 said:
http://rapidshare.com/files/1247486...0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe.html
if you guys want to put up fast mirrors ill update this post with them.
Click to expand...
Click to collapse
WAY TO COME THROUGH DCD!! WE'RE PROUD OF YOU!!
Someone want to mirror on Rapidshare.de? I can't access rapidshare.com from work, but rapidshare.de isn't blocked. Or put it up on the FTP here or at PPCGeeks? Thanks!
This is the official release - those of us with a verizon phone must wait until you release 3.2.0 ...........right?
DCD - Man, you deserve to be knighted. Sir DCD has a certain ring to it, doesn't it?
This is the official release - those of us with a verizon phone must wait until you release 3.2.0 ...........right?
Click to expand...
Click to collapse
Yes, this is the official sprint 6.1 update with 3.42.02 radio. Non sprint customers can use it to flash the radio only (if you can't via sd card), but again CAN'T let customizations run. Non sprint customers will have to wait until the custom rom is released.
i cant take any credit im just passing things along.
dcd1182 said:
i cant take any credit im just passing things along.
Click to expand...
Click to collapse
DCD, so when Sprint decides to "officially" release their ROM, this will be the exact file? Or is this a leak or test like the 3.49 or whatever?
DCD, so when Sprint decides to "officially" release their ROM, this will be the exact file? Or is this a leak or test like the 3.49 or whatever?
Click to expand...
Click to collapse
This is it....hence the key word "Ship"
gc14 said:
Yes, this is the official sprint 6.1 update with 3.42.02 radio. Non sprint customers can use it to flash the radio only (if you can't via sd card), but again CAN'T let customizations run. Non sprint customers will have to wait until the custom rom is released.
Click to expand...
Click to collapse
GC, As always - thanks for the quick response.
Mirror for RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe
I'll host this for a while. Enjoy!
Going to have to host this off the FTP server... Sorry for the few minutes of downtime...
Download Here
Thanks again DCD for all your hard work. These phones are crap until you get a DCD ROM on it!
THANKS...
gc14 said:
This is it....hence the key word "Ship"
Click to expand...
Click to collapse
You are AMAZING!
dcd1182 said:
if you guys want to put up fast mirrors ill update this post with them.
Click to expand...
Click to collapse
Fast HTTP Mirror:
http://www.geek-pages.com/rom/RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
Kevan
The naviagtion is a lot different now.
How so Justin? - those like me with Verizon are itching to check it out!!
Just flashed - Here's a couple of first impressions, in case anyone's interested. Speed of the phone and internet are about the same. Booted up with appr 20 mb free. Not sure I'm in love with the new larger start menus - Takes up too much screen real estate. Also, there's something funky going on when you scroll - The icons toward the bottom of the screen sort of flash. One MAJOR change is the GPS - When I used radio 3.39, it took from 30 seconds to a minute to connect. Now it took about 8 seconds...Inside! Well, like I said, just first impressions...
Thanks again, DCD!
kashabrown said:
How so Justin? - those like me with Verizon are itching to check it out!!
Click to expand...
Click to collapse
It's just a different layout. and different login. It's ask for your name and email loging in. And you can get pull up an address from your phone book if you have their address in the contact. Does that make sense? lol. It's just like att's now. If you've ever seen that one.
im going to just chime in here
it appears sprint didn't fix the kernel bugs with this one.
i.e. some commonly used apps will give access violations. maybe this is actually a new security feature?
So I'm getting close to nailing down a test build but I keep getting a "System Build" Error... Found out that you have to KISS when it comes to options and only certain portions of the app and funciton list can support multi selects....Now to the question
How can I get a custom rom from one the guru's to beg borrow and still in that thing... do I throw the NBH file of theirs into the OEM USER folder? Or should I beg up their kitchen rars and load those to my kitchen I know NATF and Arrup and some others have load their kitchens will PPC take the RAR's and do it up or am smoking some good stuff all together?
Thanks!
-Gravesy
Most of us dont use PPC kitchen. We use the Build OS and raphael kitchen created by Juggler, Jscepi, ervius and a few others. I know Da_G and I both have modified versions that we have customized. The main reason we dont use PPCKitchen is you lose most of the control over the rom.
You really cant use our roms in PPC kitchen. The only way would be to dump them with raphael kitchen and then use the packages for PPCkitchen.
I woulr suggest you take a look at Da_Gs new kitchen. Overall it will give you a better cooking experience and will let you learn more regarding cooking.
aruppenthal said:
Most of us dont use PPC kitchen. We use the Build OS created by Juggler, Jscepi, ervius and a few others. I know Da_G and I both have modified versions the we have customized. The main reason we dont use PPCKitchen is you lose most of the control over the rom.
You really cant use our roms in PPC kitchen. The only way would be to dump them with raphael kitchen and then use the packages for PPCkitchen.
I woulr suggest you take a look at Da_Gs new kitchen. Overall it will give you a better cooking experience and will let you learn more regarding cooking.
Click to expand...
Click to collapse
That's what I was going to do tonite but have only had time to fool around with PPC Kitchen and wanted to see if anyone has stretched it; being a hack I tend to become command prompt allergic and gui-config dependent but his seemed far easier than the standard Ralph Kitchen...stay tuned on Da-G's it seemed hella easy and an even better starter point to get into more advanced topics.
While I got your you don't mind if others take your stuff and try that out as the base... I know its kind of contradictory in retro but I like a wooby when I start something new like this lol.
I dont mind at all Ill upload my OEM ROM SYS folders this evening. My nbh cant be dumped since I combined the dsm file. However I will gladly share the base. Ill post them in my ROM thread.
aruppenthal said:
I dont mind at all Ill upload my OEM ROM SYS folders this evening. My nbh cant be dumped since I combined the dsm file. However I will gladly share the base. Ill post them in my ROM thread.
Click to expand...
Click to collapse
Swee thanks...the toughest thing I that still haven't had the light switch come on about is how to piece mail everything together PPC Kitchen is pretty well documented while the base Advanced Kitchens are still getthing there but like you suggest D_ag's looks like it'll be easy to pick up and use.
gravesy56 said:
Swee thanks...the toughest thing I that still haven't had the light switch come on about is how to piece mail everything together PPC Kitchen is pretty well documented while the base Advanced Kitchens are still getthing there but like you suggest D_ag's looks like it'll be easy to pick up and use.
Click to expand...
Click to collapse
Theres alot of info about the kitchens here if you take a peek over in the kaiser forum. They work identically.
aruppenthal said:
Theres alot of info about the kitchens here if you take a peek over in the kaiser forum. They work identically.
Click to expand...
Click to collapse
Thanks man, I will definitely be reading up!
Arupp,
In reading thru seems easy however just a point of clarity needed; when you say they are identical what do you mean exactly? I know the ROMs are different, but are you roofing to steps and kitchen behaviors? Sorry again for the newb answers just want to be clear
Thanks again!
-GG
gravesy56 said:
Arupp,
In reading thru seems easy however just a point of clarity needed; when you say they are identical what do you mean exactly? I know the ROMs are different, but are you roofing to steps and kitchen behaviors? Sorry again for the newb answers just want to be clear
Thanks again!
-GG
Click to expand...
Click to collapse
Yes operation is identical. There are some differences behind the scenes