Could anyone provide me with info on how to downgrade to WM5? I need to do this for warranty purposes. The guide isn't online anymore for a few months at http://www.mrvanx.org/.
I would like to downgrade my wm6.1 to wm5 or wm6 (official roms T-mobile NL).
Thanks for your help
Since the guide to downgrade is still offline, I don't know how to handle.
I have searched the forums, but everyone keeps on linking to this guide of mrvanx.
I found this thread where mrvanx provides
this link to download SPL 1.10.oli. Since I understand I will first have to flash to 1.10 olipro before flashing the factory default SPL.
After I have used this I keep on getting ERROR [260] : UPDATE ERROR
Can anyone please tell me how I should downgrade my Device?
I have WM 6.1
Radio version: 1.54.07.00
And still 2.10 olipro
thx
I stuck there now.
No guide for downgrading to WM5,
My phone is dopod 838pro, and SPL now is 2.10 olipro
Anyone can tell me where to get it?
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Related
I have been using my Hermes for about 2 months and have been reading this forum keenly about upgrading the firmware.
I am getting ready to try my first upgrade and I understand the risks involved in flashing the ROM and thus want to proceed cautiously.
I have successfuly upgraded to HardSPL 2.10 Olipro this morning and want to upgrade the main ROM now.
Reading Mrvanx's "Downgrading to WM5" guide, I noticed one has to downgrade the bootloader to 1.11 Olipro for some WM5 ROMs.
Have I understood this correctly this downgrading the bootloader is ONLY for keeping the warranty - and if I don't care about the warranty, I can downgrade from the WM6 ROM to WM5 ROM and keep SPL 2.10 Olipro?
thanks!
hi
I had the same problem http://forum.xda-developers.com/showthread.php?t=310298&highlight=pauloinho ,but i read the GUIDE http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26.
Now my phone works wm5
gulakpi said:
I have been using my Hermes for about 2 months and have been reading this forum keenly about upgrading the firmware.
I am getting ready to try my first upgrade and I understand the risks involved in flashing the ROM and thus want to proceed cautiously.
I have successfuly upgraded to HardSPL 2.10 Olipro this morning and want to upgrade the main ROM now.
Reading Mrvanx's "Downgrading to WM5" guide, I noticed one has to downgrade the bootloader to 1.11 Olipro for some WM5 ROMs.
Have I understood this correctly this downgrading the bootloader is ONLY for keeping the warranty - and if I don't care about the warranty, I can downgrade from the WM6 ROM to WM5 ROM and keep SPL 2.10 Olipro?
thanks!
Click to expand...
Click to collapse
your question has been answered...
PLEASE SEARCH BEFORE POSTING QUESTIONS LIKE THESE.
this has been covered many times already.
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Hi,
A few weeks ago I upgraded my T-Mobile Vario 2 to WM6 using the TMUK official update. I like WM6 but now need to downgrade back to WM5 because my satnav software (Route 66 Navigate 7) doesn't work on WM6! I've downloaded the WM5 rom from TMUK but it won't install - it puts the phone into debug mode (the multicoloured thing) but then waits for a while before coming up with an Error 260.
I've read all the guides and used the search but can't find an answer - this is a "stock" phone, not unlocked in any way and I'm only using the official operator's ROMs. Any ideas?
Many thanks,
Tim
http://forum.xda-developers.com/showthread.php?t=364424
read this it seem to be the same error
Thanks - but I was hoping to avoid having to unlock the phone. As I understand it I shouldn't need to seeing as I'm trying to install official operator roms?
Cheers,
Tim
what is your bootloader version (HINT HINT)
IPL 1.04
SPL 2.03
I thought none of that mattered if I have only ever used official TMUK operator roms? I went from an offical WM5 to official WM6 and now I'm just trying to go back to official WM5? Whilst I trust the people on here more than I do TMUK support they say there should be no problem doing this.
Thanks again,
Tim
tj80 said:
IPL 1.04
SPL 2.03
I thought none of that mattered if I have only ever used official TMUK operator roms? I went from an offical WM5 to official WM6 and now I'm just trying to go back to official WM5? Whilst I trust the people on here more than I do TMUK support they say there should be no problem doing this.
Thanks again,
Tim
Click to expand...
Click to collapse
Since the old RUU isnt aware of the newer SPL version you have that is why it doesnt work.
Follow the guide for downgrading HERE.
BRILLIANT! Thanks mrvanx. I put HardSPL on using your instructions, then followed the WM5 downgrade guide. Only problem was that autodetect of my bootloader didn't work, and my SPL version wasn't listed so I had to use SafeSSPL. Seems to have worked, thanks again.
Cheers,
Tim
I HAVE XO1HT SPL 1.06 what tool i can use to downgrade spl to 1.04 i see marvn'x guide but all the download site not found if any body could give me the right tool to donwgrade spl to 1.04 ineed to unlock my phone im a newbi i can read but im not familiar with the tools if anyone could guide me and give me link to what software i should use...
thanks
br martians
I dont know exactly the problems with softbank devices but as far as I understand everything you need to know to SIM unlock it is here http://forum.xda-developers.com/showthread.php?t=293665 and here http://forum.xda-developers.com/showthread.php?t=301952. Tell if is usefull.
HTC Tytn
SuperCID
SPL: 2.10.Olipro (HardSPL v7)
ROM: Shamanix WM6 Ultimate v2 Final
RADIO: 1.48.00.10
hi friends
when I try to update my pocket pc to wm6.1 spl 1.2 or flash spl whit athena unlocker it breaks at 1% during the flash and dont let me to unlock it or upgrade it what can do please help me
thanks alot before for your helpful information
my phone information
wm5
spl 1.07
rom version 1.25.409.2
radio version 1.38.00