Related
I need a link to a good nk.nbf file because the files i use donot work for me....... i have an unlocked g4 hard spl/ipl 2.21.0001/2.21.olip...... i also i'm running on Mun's_Ruu which the camera and voice command buttons do not work........... but other than that when i try 2 upload a new program like the TNT for wizard... my image version is 1.2.0.0 and rom image that i'm trying to upload to is 3.0. after my phone enters the bootloader mode no downloading occurs and it says that i need a newer utility update......... does anyone know what is wrong and how to fix this problem???
Did you try to use the RUU equipped with ROM itself, not your own version?
the same problems occur........ it always say's that i need a newer update version no matter what file i use with it............ do you think that it is my computer?
I had the same problem. I was using Vista and the rom I was loading had a vista loader in it but it would not work. I use VMware so I loaded it in xp and still had the same problem. I used the loader from another ROM and it worked fine, so not sure why the TNT loader would not work.
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
Hi all,
i've been trying to unlock my Niki for the entire evening now, but it still won't work.
I got a HTC Niki 100 with my Vodafone subscription, and wanted to play some video's on it. This absolutely failed with horrible framerates ( like it did all the time ), so i wanted to upgrade the rom ( so i could also play games like a GBA emulator ). Every time i wanted to upgrade the rom, i got a 262 Upgrade Error, which meant ( according to another topic here ) that my device was locked. Then i tried a HardSPL unlocker, but nothing works.
So here's my question.. Can you guys help me out to get custom roms on my Niki? I've been trying for to long now, and I think that I could be on within notime with your help
Try to read the sticky Threads, all you need is there. Nearly all people have done the unlock with this threads.
vcdwelt said:
Try to read the sticky Threads, all you need is there. Nearly all people have done the unlock with this threads.
Click to expand...
Click to collapse
well, the biggest problem is that I get all kinds of error messages with that software, mostly because of Vista 64-bit OS... some apps don't seem to work with x64 and therefore i'm having a hard time finding software that works with 64-bit normally...
Gydeon said:
well, the biggest problem is that I get all kinds of error messages with that software, mostly because of Vista 64-bit OS... some apps don't seem to work with x64 and therefore i'm having a hard time finding software that works with 64-bit normally...
Click to expand...
Click to collapse
All of these hacks run in WinXP. Try setting the compatibility mode to WinXP and try. Might need to look at a WinXP PC?
I managed to get my hands on a Vista 32-bit system yesterday, and indeed, it all workes now.
Thanks for everything, this topic can now be closed.
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
dolphinxda said:
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
Click to expand...
Click to collapse
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
zen_usuario said:
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
Click to expand...
Click to collapse
Thanks for ur commend man! i also tried to flash Eboot.nb0 fro SD card on that time, after place Eboot.nb0 on sd card, Enter boot loader by taking out battery Press Send + End button for a while, put battery back.
it show HP boot loader around 5 to 10 minutes, restart, every the same.
please Sir dolphinXDA
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
dolphin XDA pls help sir
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
playvoice_17 said:
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
Click to expand...
Click to collapse
Sorry guy m not a cooker, m a user like u too. what i wrote above just a sharing with u guys. it's a mistake coz i want to use rom that is stable for HP.
I have tested all 6.5 ROM from PDAViet but bluetooth and wireless not working well, on the other hand rom from PDA Viet not a clean one.
Now day i still using 6.1 from Helloworld1, may i recommend you to use 6.1 by Helloworld1 till we can found 6.5 clean ROM like Helloworld1?
Hey Xda-developers. Just quickly, I found this Forum from a few links on other websites (gizmodo, engadget) and some youtube videos of your awesome custom ROMs.
I for my HTC Hero in March, and I should be upgrading around christmas 2011. That's a while, and Android grows fast..much much faster than HTC update my device, so I'm thinking a custom ROM is what I really want.
I've done my research, but honestly I'm pretty much a noob here. I know I need to root the phone, but I've been unable to find any specific instructions for 3 UK, and as far as I can tell all the different carriers use different instructions (a different ROM to downgrade to?), so I don't want to use the wrong ones.
-
Phone Spec
Okay, this is a standard HTC Hero on a 24 month contract carried by 3 UK.
There has been no rooting, no major changes. I have done no more than officially supported. A complete from scratch root would be required.
Currently running 1.5.
UK, 3 Mobile, GSM.
No hardware replacements and no known issues with the phone.
-
I think that's about all, is somebody here able to point me to the right place for a 3 mobile root?
Thanks in Advance,
Callum.
I'm also on 3uk and i rooted my phone using the following guide:
http://androidforums.com/all-things-root-hero/54802-how-root-install-custom-rom-backup-more.html
Hope this helps.
Thankyou very much for your help! I'll be giving that guide a go later.
No probably m8, SenseHERO is a good custom ROM.
Any trouble just post up and ill try and help you out.
Hmm, if I could ask you to take a look at a post, that'd be really helpful. No worries if you don't have a clue though.
Hero, G2 Touch Android Development >
[Guide] Complete Newbie Guide to Install a Custom Rom & Newbie FaQ [Updated 02/05] >
Page 33, Post 1.
Sorry that link is so bad, but they won't let me post a proper one.
That thread was alternative 2 for the 3uk guide you gave me (goldcard section). I'm not sure whether you'll be able to help me, but if you could take a look that'd be massively helpful.
Cheers,
Callum.
I posted a reply to more or less the same problem earlier.
http://forum.xda-developers.com/showpost.php?p=6701261&postcount=268
Let me know how you get on.
Thankyou very much for your reply, but I have already done all of this. I've successfully performed a goldcard on my SD and I'm really close to getting a working custom ROM, but it's dying somewhere there. I have already installed the x64 drivers though.
HTC Sync works perfectly, picking up the phone and synchronizing on demand.
Thanks,
Callum.
What guide are you using, i used this was one to create a goldcard and downgrade:
http://forum.xda-developers.com/showpost.php?p=5855697&postcount=1
The only problem i had was syncing after installing the latest version. I fixed it by downloading a driver manager and updated the drivers for it.
I take it it lets you mount the SD card on your computer?
One thing that might be worth a try is to download the ROM again, it might be corrupt, a shot in the dark but worth a go.
That's the guide I ended up at, after following a link within the guide you provided above.
It does indeed allow me to mount the SD card, everything syncs perfectly. I'll give re-downloading the ROM a go, though. There was two available, so I'll try the other download.
Hmm, I've tried everything I can think of, and nothing is working on this Windows 7 machine. My brother's XP machine is broken, and my dad's away with the XP notebook.
Is there any way that anybody knows of to run XP as a virtual machine temporarily?
Here's a link for a virtual box:
http://www.virtualbox.org/wiki/VirtualBox
I dont know how to run it though.
Someone had a similar problem on win7 yesterday and sorted it by getting a new gold card. Might be worth a try?
Aha, I re-downloaded goldcard, and switched the driver to My HTC once with it normally plugged in, then with bootloader open. And it downgraded!
I've got the Scenehero on the SD card now, I'm just unable to launch the custom recovery screen. It will start normally by hitting power, but while the home button is also held it just loops the first hero screen. Is there any way past that, because I need to perform a wipe and flash scenehero.
Thanks so much for your help so far, you've been amazing!
If your all set up properley you should be able to connect your phone via usb to the PC,
then open a command window and type>"adb shell devices"
your phone should show in the window something like HTLK12345
now type> "adb shell reboot recovery"
this should boot your phone into recovery mode.
Hope this helps.
Thankyou very much for your help, I solved the problem by re-installing my recovery. Not sure what went wrong but it worked after that. All looks good now!
good stuff m8, glad your sorted.
what rom are you running?
I'm currently using the latest version of Sensehero. Really pleased with it so far.
I'm on branch 3, waiting for branch 5, should be here soon hopefully.
If you have'nt already m8 check out the site:
http://www.htcdevscene.co.uk/
Some top lads over there having a good time!!.