Related
Hey Xda-developers. Just quickly, I found this Forum from a few links on other websites (gizmodo, engadget) and some youtube videos of your awesome custom ROMs.
I for my HTC Hero in March, and I should be upgrading around christmas 2011. That's a while, and Android grows fast..much much faster than HTC update my device, so I'm thinking a custom ROM is what I really want.
I've done my research, but honestly I'm pretty much a noob here. I know I need to root the phone, but I've been unable to find any specific instructions for 3 UK, and as far as I can tell all the different carriers use different instructions (a different ROM to downgrade to?), so I don't want to use the wrong ones.
-
Phone Spec
Okay, this is a standard HTC Hero on a 24 month contract carried by 3 UK.
There has been no rooting, no major changes. I have done no more than officially supported. A complete from scratch root would be required.
Currently running 1.5.
UK, 3 Mobile, GSM.
No hardware replacements and no known issues with the phone.
-
I think that's about all, is somebody here able to point me to the right place for a 3 mobile root?
Thanks in Advance,
Callum.
I'm also on 3uk and i rooted my phone using the following guide:
http://androidforums.com/all-things-root-hero/54802-how-root-install-custom-rom-backup-more.html
Hope this helps.
Thankyou very much for your help! I'll be giving that guide a go later.
No probably m8, SenseHERO is a good custom ROM.
Any trouble just post up and ill try and help you out.
Hmm, if I could ask you to take a look at a post, that'd be really helpful. No worries if you don't have a clue though.
Hero, G2 Touch Android Development >
[Guide] Complete Newbie Guide to Install a Custom Rom & Newbie FaQ [Updated 02/05] >
Page 33, Post 1.
Sorry that link is so bad, but they won't let me post a proper one.
That thread was alternative 2 for the 3uk guide you gave me (goldcard section). I'm not sure whether you'll be able to help me, but if you could take a look that'd be massively helpful.
Cheers,
Callum.
I posted a reply to more or less the same problem earlier.
http://forum.xda-developers.com/showpost.php?p=6701261&postcount=268
Let me know how you get on.
Thankyou very much for your reply, but I have already done all of this. I've successfully performed a goldcard on my SD and I'm really close to getting a working custom ROM, but it's dying somewhere there. I have already installed the x64 drivers though.
HTC Sync works perfectly, picking up the phone and synchronizing on demand.
Thanks,
Callum.
What guide are you using, i used this was one to create a goldcard and downgrade:
http://forum.xda-developers.com/showpost.php?p=5855697&postcount=1
The only problem i had was syncing after installing the latest version. I fixed it by downloading a driver manager and updated the drivers for it.
I take it it lets you mount the SD card on your computer?
One thing that might be worth a try is to download the ROM again, it might be corrupt, a shot in the dark but worth a go.
That's the guide I ended up at, after following a link within the guide you provided above.
It does indeed allow me to mount the SD card, everything syncs perfectly. I'll give re-downloading the ROM a go, though. There was two available, so I'll try the other download.
Hmm, I've tried everything I can think of, and nothing is working on this Windows 7 machine. My brother's XP machine is broken, and my dad's away with the XP notebook.
Is there any way that anybody knows of to run XP as a virtual machine temporarily?
Here's a link for a virtual box:
http://www.virtualbox.org/wiki/VirtualBox
I dont know how to run it though.
Someone had a similar problem on win7 yesterday and sorted it by getting a new gold card. Might be worth a try?
Aha, I re-downloaded goldcard, and switched the driver to My HTC once with it normally plugged in, then with bootloader open. And it downgraded!
I've got the Scenehero on the SD card now, I'm just unable to launch the custom recovery screen. It will start normally by hitting power, but while the home button is also held it just loops the first hero screen. Is there any way past that, because I need to perform a wipe and flash scenehero.
Thanks so much for your help so far, you've been amazing!
If your all set up properley you should be able to connect your phone via usb to the PC,
then open a command window and type>"adb shell devices"
your phone should show in the window something like HTLK12345
now type> "adb shell reboot recovery"
this should boot your phone into recovery mode.
Hope this helps.
Thankyou very much for your help, I solved the problem by re-installing my recovery. Not sure what went wrong but it worked after that. All looks good now!
good stuff m8, glad your sorted.
what rom are you running?
I'm currently using the latest version of Sensehero. Really pleased with it so far.
I'm on branch 3, waiting for branch 5, should be here soon hopefully.
If you have'nt already m8 check out the site:
http://www.htcdevscene.co.uk/
Some top lads over there having a good time!!.
Hey All
I have a requirement for setting up a dual boot on the HTC Hero using the SD Card for the 2nd OS.
I've looked around and have come across the Dual Booting for the Windows Mobile and Android on the HTC HD2 and was hoping somebody might be able to point me in the right direction archiving this on an Hero.
I'm not looking to run both OS at the same time, ie not running Ubuntu/Debian via a loop device.
So if anyone knows of any good guides for editing the Boot.img, i thinking that where the magic gonna happen, i might be wrong, please i would very much like to hear from you.
Many Thanks
c0mput3
ubuntu in its present form simply will not run. cmd based linux is a possibility for many mobile devices, as has been prooved by cmd linux on iphone os.
I wouldnt know about how to go about this though.
Speak to kendon over on Villainrom forums.I think hes probably the one to talk to as im sure he said ubuntu is possible
Many thanks Bonesy, checking that now. =)
Status?
... and what was the end result?
There is a thread on the villianrom forum for running ubuntu/debian alongside android though I'm still waiting for a new SD card before I try it. I would link but its still down, any ETAs for it being back up yet, I understand it might take a while?
Hello.
Its been a while when i last messed with my Viewpad 10. Last time i only messed with it to try Meego. Well my problem was i couldn't get a dual-boot with Windows 7 and Android 1.6 working.
I installed Windows 7 without any problems on the Viewpad. but every-time i try installing android on the 1st 3.8 GB partition (also called sda1) and I formated that partition in ext3 like written in the instructions i read for installing Android on the Viewpad. I also installed grub bootloader.
But still I have no luck. I can start Android once. But after one reboot I only get to Windows and thats all.
Maybe Im just being stupid. but I've been searching long for a solution. So I decided to ask here. i hope some people can help me here.
If u need more info then just ask.
one's istalled grub bootloader, you have to click yes to windows bootloader too.
I hope it hepls
ciao
Hello everyone! I'm a total noob here, and sorry if I posted in the wrong section!
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
[Genymotion Player] [Debug] Output command: "0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%"
At the end, not very helpful to me. So I tried running it through VirtualBox, giving me "untracked pid exited ____" with a number 100+ in the ____.
I'm totally confused, because other devices work fine, including SGS4 4.2.2, but SGS4 4.3 doesn't work. Please help, and please explain in noob language, I'm not very proficient with this! :laugh:
Anyone?
Bump...
Anyone know a solution?
I really want this fixed! Does anyone know anything to fix this?
It seems by bumping this thread, I only get views, not replies.
It seems that other questions are mostly being answered, however mine is ignored. At least ask for more details if that's the problem!
Sitting in silence doesn't do any good to anyone.
I'm really about to give up on this forum, it's driving me nuts how nobody seems to care enough to even ask a question for more details.
zipperklooder said:
Hello everyone! I'm a total noob here, and sorry if I posted in the wrong section!
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
[Genymotion Player] [Debug] Output command: "0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%"
At the end, not very helpful to me. So I tried running it through VirtualBox, giving me "untracked pid exited ____" with a number 100+ in the ____.
I'm totally confused, because other devices work fine, including SGS4 4.2.2, but SGS4 4.3 doesn't work. Please help, and please explain in noob language, I'm not very proficient with this! :laugh:
Click to expand...
Click to collapse
I have never used genymotion .... But all ask this question... Do you have to have sdk manager installed to use it? If so, is it up to date? Make sure you have the latest version of everything. Sounds like it's 4.3 that's not working so maybe that's it. (I'm guessing)
http://imgur.com/vYFZrIr.jpg
JrSmilez said:
I have never used genymotion .... But all ask this question... Do you have to have sdk manager installed to use it? If so, is it up to date? Make sure you have the latest version of everything. Sounds like it's 4.3 that's not working so maybe that's it. (I'm guessing)
http://imgur.com/vYFZrIr.jpg
Click to expand...
Click to collapse
Thank you for the reply. It was not specified to have SDK Manager installed. I have tried installing the latest version of Genymotion, but because Debian doesn't have the required version of (e)glibc, I'm unable to install it. The odd thing is that it stopped working abruptly, with no change on my part .
zipperklooder said:
Thank you for the reply. It was not specified to have SDK Manager installed. I have tried installing the latest version of Genymotion, but because Debian doesn't have the required version of (e)glibc, I'm unable to install it. The odd thing is that it stopped working abruptly, with no change on my part .
Click to expand...
Click to collapse
Not sure what to tell you. Maybe when I get home I'll download it and try it out myself.
http://imgur.com/vYFZrIr.jpg
Did you try installing it?
zipperklooder said:
Did you try installing it?
Click to expand...
Click to collapse
I was able to install it and run a 4.3 emulator on my computer. Last night was the 1st chance I've had to mess with it though. I'm on windows7 though so I don't know if that makes a difference.
http://imgur.com/vYFZrIr.jpg
Bump, and it probably does make a difference.
BUMP!
Just curious, do you just open Genymotion, or do you open something that came with it? I believe it came with Genymotion shell and Oracle vm virtual box. I only open Genymotion and I have no trouble.
Sent from my LG-LS980 using Tapatalk
Might be a bit late in responding.
Is virtualization enabled from BIOS, otherwise CPU would be forced to 1 core only and would take long time to load, I had this issue however, playing a bit with the RAm (lowering it ) sorted the problem.
with 1 core the Emulator becomes slow.
Did you try to check the logcat? It should say something.
Also Genymotion using OpenGL, so there might be some problems with your video card
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?