Ok im not new to this flashing rom thing and ive been doing it for a while now but as of last night my phone randomly is rebooting i turn it on it works for a second and then reboots and then doesnt even get into the today screen just shows htc and reboots and reboots again i flashed to new rom did hard reset went back to original stock verizon rom and nothing any input would be awesome
bryanw17 said:
Ok im not new to this flashing rom thing and ive been doing it for a while now but as of last night my phone randomly is rebooting i turn it on it works for a second and then reboots and then doesnt even get into the today screen just shows htc and reboots and reboots again i flashed to new rom did hard reset went back to original stock verizon rom and nothing any input would be awesome
Click to expand...
Click to collapse
Try re-doing the bootloader. Sounds like a bad one. I've had that happen as well.
so should ijust reload hardspl 2.4 ? and then flash rom and what not ? cuz remember i cant get an active sync to run anything i can only get to the spl screen with the 3 colors it doesnt reboot there
bryanw17 said:
so should ijust reload hardspl 2.4 ? and then flash rom and what not ? cuz remember i cant get an active sync to run anything i can only get to the spl screen with the 3 colors it doesnt reboot there
Click to expand...
Click to collapse
hmm.... does it at least attempt an activesync connection? Does it stay in long enough? What I've done... is gotten RomUpdateUtility all the way to the last screen... and clicked next as soon as activesync sees it.
so.. i updated the hard spl and nothing it still restarts
bryanw17 said:
so.. i updated the hard spl and nothing it still restarts
Click to expand...
Click to collapse
Only suggestion left is to start over.... flash a different radio / rom... and then flash back.
did it twice i called verizon im getting a new one ty for the help tho
bryanw17 said:
did it twice i called verizon im getting a new one ty for the help tho
Click to expand...
Click to collapse
I take it you did a Lost / stolen phone? Or is it a replacement from verizon because it isn't working?
its under warranty so its free
Gotcha. I'm guessing they are making you send the old one back.
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
I was going to AT&t to try to get a replacement because the keyboard was very loose so I was flashing everything back after flashing the rom back I was flashing the stock hard spl but instead of replacing the nbh file I just put the file on my storage card and flashed it (VERY STUPID)
When I turn my phone on I get the tricolor screen and a message that says: Upgrade ROM code error Please try agian =
and nothing happens I tried hard reseting it but nothing happens, I can't get past that screen, I also tried flashing a new rom through the storage card method since I can't connect with Active Sync
Please help me , I just got my phone in November and I don't want to loose it, I would like to see what help I can get before going thought ATT customer service and telling them I didn't do anything and that it just happened by itself
Thanks to any people who respond
i think to flash a rom from pc u don't need to be connected to active sync try conecting while in tri clour screen and flash the rom
or could u say what exactly happened where u trying to flash a rom or what?
i tried now with my touch pro i entered boot mood then tried connected to pc to flash a rom and it worked it started.......
Thegreat1 said:
i think to flash a rom from pc u don't need to be connected to active sync try conecting while in tri clour screen and flash the rom
or could u say what exactly happened where u trying to flash a rom or what?
Click to expand...
Click to collapse
I was trying to restore the stock hard spl, don't
Thegreat1 said:
i tried now with my touch pro i entered boot mood then tried connected to pc to flash a rom and it worked it started.......
Click to expand...
Click to collapse
did u connect to Active Sync or through the storage card
no active sync
just entered boot mode then put the usb cable then started the flashing process
Thegreat1 said:
no active sync
just entered boot mode then put the usb cable then started the flashing process
Click to expand...
Click to collapse
I get an error during the flashing process, i was flashing the hard spl
read the first paragraph on the first post, I added exactly what I did wrong
u were trying to flash hard-spl when it hanged in the tri-clour screeen?
did u revert back to stock rom before trying to revert to stock spl?
Thegreat1 said:
did u revert back to stock rom before trying to revert to stock spl?
Click to expand...
Click to collapse
ya, read the my first post again, I added some stuff
Thegreat1 said:
u were trying to flash hard-spl when it hanged in the tri-clour screeen?
Click to expand...
Click to collapse
yes, after I messed it up the first time
if you can get to the boot loader screen you can probably flash any rom. simply rename the rom file to RAPHIMG.nbh and place it on your memory card, hold volume down + reset with stylus. you should be set. good luck.
does the bootloader still show the olinex 1.90
warren2781 said:
if you can get to the boot loader screen you can probably flash any rom. simply rename the rom file to RAPHIMG.nbh and place it on your memory card, hold volume down + reset with stylus. you should be set. good luck.
Click to expand...
Click to collapse
tried it, it doesn't work
Thegreat1 said:
does the bootloader still show the olinex 1.90
Click to expand...
Click to collapse
No, I am trying to flash it back to the olinex 1.90 but I keep getting an error in ruu
Have you tried this http://forum.xda-developers.com/member.php?u=467141
try flashing hard-spl once again. if it works your saved. as far as i know the people over at att only check for water mark at least in my place the y do. good luck
I found that it was not possible to flash the HardSPL from tri-colour screen.
It only worked for me when windows mobile was fully booted. When you start the HardSPL RUU the phone's screen will just go black, and will return when the update is completed.
I would try connecting the phone while in tri-colour mode, then running the original rom RUU on the PC and seeing if it works. If it gets to the stage where the loading bar shows up on the phone you should be ok.
Once the rom is loaded, start your windows mobile, connect to the PC, and run the RUU for HardSPL.
Best of luck to you!
Thanks for your guys responses I have successfully recovered my phone, I just flashed the original ATT rom from ruu
Very glad that you found solution to fix that problem, because it could happend to any one. Especially after I was thinking to flash everything back to att stock because of my usb exit is getting loose.
mr.denis said:
Very glad that you found solution to fix that problem, because it could happend to any one. Especially after I was thinking to flash everything back to att stock because of my usb exit is getting loose.
Click to expand...
Click to collapse
Thanks, ya, you just have to be careful and read directions if present and read them carefully
i just bought my hd2 fromt-mobile and naturally couldn't resist but to modify it
So i installed and flashed the HSPL2 with no problem it worked perfect and very fast and easy....and i installed Mesus Rom and love it did my registry tweeks got the phone running awesome!!!
Now i woke up early was browsing on htcpedia and glanced at the new DOPOD version radio.... well..... it installed fine no errors but when it got to 100% to reboot BLACK SCREEN. I've tried getting the phone into bootloader mode nothing, tried a master reset holding down the volume up and down at the sometime and press power nothing, i've tried to plug it in the computer it recognizes it my computer makes the connected to a device noise but when it goes to initialize the hd2 i get this driver error:
Qualcomm CDMA Technologies MSM failed.
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
the radio i flashed that caused this was 2.051.03(DOPOD)
poulosjr said:
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
Click to expand...
Click to collapse
I hope so for your sake, however... When you say you have a HD2(T-Mobile), do you mean the US one?
Flashing guide for TMOUS HD2 states:
mskip said:
PLEASE READ ALL THE INFORMATION IN THIS GUIDE BEFORE INSTALLING HARDSPL OR FLASHING A ROM/RADIO. IF YOU FLASH AN INCOMPATABLE ROM OR RADIO ON THE 1024LEO THEN THERE IS A POSSIBILITY OF BRICKING YOUR DEVICE SO PLEASE BE VERY CAREFUL!!
Click to expand...
Click to collapse
poulosjr said:
the radio i flashed that caused this was 2.051.03(DOPOD)
Click to expand...
Click to collapse
Is that this one (2.09.51.03)?
Says in the post there it doesn't support 576MB RAM. That would probably mean it's not compatible with the TMOUS HD2. I vaguely remember that being the case for any version with 51 in it.
Sorry to be completely unhelpful here, but I wouldn't have a clue on how to revive your HD2.
Perhaps people in the TMOUS HD2 Flashing guide thread might know something?
----
meptik
chalk another non-starter up to a ..51.. radio on a tmous phone.
still not seen a fix
is the tmobile us hd2 recoverable or is it bricked out?
sorry, not sure. see other threads HERE (post three) and HERE , , it's also mentioned in the mtty and the HSPL (regular HSPL and tmous HSPL) threads.
As far as i can gather so far, roms below 2.10 cause not to boot, but can recover from bootloader, radios with a ..51.. in them cause it not to start at all. (because ..51.. radios don't support the 576mb, presumeably)
Best of luck.
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
brandon2004 said:
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
Click to expand...
Click to collapse
sounds more like a dodgy phone than a bad flash. wait for stock and get it exchanged.
bricked
I have the same problem. I just wanted to go back to stock rom and i downloaded this bull crap rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe
BRICKED MY TMOBILE USA HD2!!! DO NOT LOAD THIS ROM!!!!
took it to the tmobile and i now have to wait till tomorrow for them to get more in stock... im pissed!!!
sk8er982 said:
im pissed!!!
Click to expand...
Click to collapse
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
i am...
samsamuel said:
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Click to expand...
Click to collapse
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
they need to remove the .51 versions, i just bricked mine and all i saw really was to not install it, not that it would completely brick it. I'm really upset.
donalgodon said:
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
Click to expand...
Click to collapse
I hope that was sarcasm LOL
sk8er982 said:
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
Click to expand...
Click to collapse
That info is still in the same thread that y'all should have read before bricking your HD2's. Many (and I mean many) of us flash our HD2's all the time, run ROM's custom built to even let us run the latest and greatest Android builds available.
When you and the OP (iirc) get some fresh HD2's, read the info and links in the stickies here. There's enough info in those to get you well on your way to mastering your HD2's destiny.
Best of luck.
So true. ALL chefs always warn ab NOT flashing .51 radios on TMOUS HD2 or they posting links to HOW TO FLASH TMOUS HD2.
Dont rush with first flashing! Thats the best way to brick ur phone!
Always read the forum! Thats the bast way to make ur phone happy
htc hd2 after installing andriod
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
sherko_bax said:
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
Click to expand...
Click to collapse
it is tmous yes? it sounds like he flashed a bad radio,
If that is the case, i would be MAD AS HELL and demand they pay for the replacement of teh motherboard.
Hey guys,
I've had my hands on a HTC Mozart yesterday that was appareantly broken. When i tried to start the phone it would simple be stuck on the HTC boot logo. I thought it was bricked or something and because of that i procedeed to flash the phone with RSPL and then HSPL and try both Dynamics 2.0 and Deepshining 7.0. The thing is, when those custom ROMs were installed, the phone wouldn't be stuck on the HTC logo but it would function normally for 1 minute or so and then reboot, this happened over and over, i wasn't even able to get past the configuration options.
I then tried to install the stock ROM again (Orange FR) to see if the phone would finally function normally. The result was that it was back to the first problem.. stuck it in HTC boot logo.
Any sugestions on how to make this phone work? I'm a newbie in the windows phone scene, so any help would be appreciated.
Btw, sorry for my bad english.
Hi there! Please try other rom, like the one's from ultrashot. I had that problem with DS rom's, and i was able to solve it temporarily by uninstalling Windows Mobile Center from the rom, but after a few weeks it started again. WIth ultrashot rom (7.5 or 7.8) the reboots never appeared!
paulosaints said:
Hi there! Please try other rom, like the one's from ultrashot. I had that problem with DS rom's, and i was able to solve it temporarily by uninstalling Windows Mobile Center from the rom, but after a few weeks it started again. WIth ultrashot rom (7.5 or 7.8) the reboots never appeared!
Click to expand...
Click to collapse
Can you send me a link to those roms? Can't seem to find them.
ibbgomes said:
Can you send me a link to those roms? Can't seem to find them.
Click to expand...
Click to collapse
The Mozart forum isn't that big... look harder man!
http://forum.xda-developers.com/forumdisplay.php?f=786
The one i use
http://forum.xda-developers.com/showthread.php?t=1520352
other good one
http://forum.xda-developers.com/showthread.php?t=1307040
Just dont brick it!!
paulosaints said:
The Mozart forum isn't that big... look harder man!
http://forum.xda-developers.com/forumdisplay.php?f=786
The one i use
http://forum.xda-developers.com/showthread.php?t=1520352
other good one
http://forum.xda-developers.com/showthread.php?t=1307040
Just dont brick it!!
Click to expand...
Click to collapse
Tried all of them before, none of them worked for me.. Maybe the problem is the battery?
ibbgomes said:
Tried all of them before, none of them worked for me.. Maybe the problem is the battery?
Click to expand...
Click to collapse
Dont know. Maybe you've done something wrong during the flash process.
Try this one from me:
http://forum.xda-developers.com/showthread.php?t=1863165
ibbgomes said:
the phone wouldn't be stuck on the HTC logo but it would function normally for 1 minute or so and then reboot, this happened over and over,
Click to expand...
Click to collapse
Flash any custom which allows you to boot for 1 minute at least and then go Settings/About to check the available memory. If it's zero - change the SD-card. Looks the same like it was with my wife's Mozart when the stock card died. Not sure - but it's worth to try....
Basic Info:
HTC One phone purchased in Hong Kong through a relative, so no idea who the provider/brand it's RUU is under
Now running on T-Mobile network in Texas
Never had been tinkered with before (Rooting/Flash-ROM/etc.)
Never had issues with it aside from only getting 3G internet (had used 4G on previous phone, same plan)
This all started randomly earlier today when the phone was idling on the desk, I was going to check something but it won't respond. I didn't have any updates pending/installing and only had a game open. First idea was no power so I plugged it into the wall, but the charging light wasn't lit so I assumed a dead internal battery. After trying a few more times, it turned back on! But this time it gives me a black screen after the white screen with the HTC logo in the middle, and to further annoy me it keeps restarting and repeating this. I tried the Hboot screen via Power+DownVolume but none of the options worked.
I tried all the options:
Fastboot (Reboot + Reboot Hboot)
Recovery
Factory Reset
Nothing worked at all and I've already scanned the forums for something similar but nothing comes up. Someone please help me fix it, I need it for work and can't afford another day like this. T-Mobile guys were no help and Best Buy guys did no better. Thanks in advance for all the help!
Did you try cleaning up the cache. You can also try flashing the M7 1.29 ROM for TMobile.
sbihue said:
Did you try cleaning up the cache. You can also try flashing the M7 1.29 ROM for TMobile.
Click to expand...
Click to collapse
Tried dumping the cache but no good. How do i "flash" a ROM btw?
Flamingiceberg said:
Tried dumping the cache but no good. How do i "flash" a ROM btw?
Click to expand...
Click to collapse
Check out this thread for flashing ROM's (Custom or Stock TMo)
http://forum.xda-developers.com/showthread.php?t=2268963
sbihue said:
Check out this thread for flashing ROM's (Custom or Stock TMo)
http://forum.xda-developers.com/showthread.php?t=2268963
Click to expand...
Click to collapse
Awesome! I'll give that a shot