Hi,
First time : i'm sorry for my bad english,
I try a radio corrupt (not for my hermes-probably for 900). I would like change the corrupt radio. I try radio 1.16 but my hermes wait 30 minutes and my pc write "checking the information ..." and nothing.
In bootloader i can see :
Herm200
IPL.-1.01
and
Herm299
SPL-1.04
After change the first corrupt radio, I have a white screen and nothing .
I would like to put the original radio.
My Hermes is a SFR Wodafone 1605.
Thank you for you help
Sincerly,
YC
See "Problem 5: Device shows NO GSM when booting" on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Re
Ok prof ! I'se a good article :
"If you feel brave, and always at your own risk, what you should do to fix your bricked hermes with screwed radio is this:
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 06) Reset your phone and put it back in bootloader mode
But 1 question :
How i can find a topic to make a rom without activsync
Thanks
Problems with boot loader on O2 Atom Life.
I press record+reset and nothing!
I get this :
======AL1 640K EBOOT=========
=========For H3=============
FEB13 2007 11:08 06 Ver 0.79
CPLD Ver A) : B0061120
CPLD Ver B) : B0061120
*************************************
* Using '<-' , '->' , 'Enter' *
* to choose what you want*
*************************************
(1) Enter OS
(2) Enter GSM AT Mode.
(3) Enter GSM AT+Diag Mode.
(4) Enter GSM Download Mode.
(5) Burn MOT/BL via UART.
Enter your selection:
****Mini-SD DETECTED******
And theat's it, nothing hapend's from here.
Pls HELP
Thanks
Edit/Delete Message
Claudissimo said:
Problems with boot loader on O2 Atom Life.
I press record+reset and nothing!
I get this :
======AL1 640K EBOOT=========
=========For H3=============
FEB13 2007 11:08 06 Ver 0.79
CPLD Ver A) : B0061120
CPLD Ver B) : B0061120
*************************************
* Using '<-' , '->' , 'Enter' *
* to choose what you want*
*************************************
(1) Enter OS
(2) Enter GSM AT Mode.
(3) Enter GSM AT+Diag Mode.
(4) Enter GSM Download Mode.
(5) Burn MOT/BL via UART.
Enter your selection:
****Mini-SD DETECTED******
And theat's it, nothing hapend's from here.
Pls HELP
Thanks
Edit/Delete Message
Click to expand...
Click to collapse
Double post dude, check your other post.
I had the same problem with a takeMS card 512 MB, after buying a san disk card with 1 GB i had no problems with flashing.
Got the same problem with my Sandisk 2GB.
After borrowing my friend's Sandisk 1GB, the flasing process runs smoothly, even though there's other files inside of it.
Just make sure there's enough space to make room for the temporary files ...
Problem solved !!! ))
I try'd a another microSD 1GB from a friend.
exactly like mine the same brand and in work't.
I don't know the reason why mine didn't work and frankly I don't even care any more since the other 1 work't. Maybe was faulty I suppose.
These are the Qualcomm CDMA Technologies MSM Windows Vista 32-bit drivers for those of you who are having trouble installing the drivers. I have only noticed this problem on Windows Vista, and therefore I have created this thread.
I have only tested the below procedure on Windows Vista 32-bit.
Please note that I am not responsible for any damages caused to your windows system as a result of wrongly in putting the codes below.
Also note that following the installation of the drivers by this method may result in Test Mode being displayed on your desktop wallpaper.
Let’s get started:
1) Download, extract and place the Qualcomm folder on your desktop.
Installing the certificate:
2) Double click on “qcusbtest.cer” and open it.
3) Click on “Install Certificate.”
4) Select “Place certificate in the following stores”
5) Place the certificate in “Trusted Root Certification Authorities.”
6) Click Next, then Finish.
7) Follow steps 2 to 4
8) Place the certificate in “Trusted Publishers”
9) Click Next, then Finish.
10) Run Command Prompt as administrator (Start>Type “Command Prompt”>Right-click on command prompt and select “Run as administrator”)
In the below steps replace the red [insert] boxes with the relevant configurations of your system.
Next:
11) On command prompt type:
Code:
cd C:\Users\[COLOR="Red"][Insert Your Windows Username Here][/COLOR]\Desktop\Qualcomm CDMA Technologies MSM\Drivers
12) Then type:
Code:
PnPUtil -i -a msmdm.inf
13) You should receive a success message.
14) Repeat for the other .inf files type:
Code:
PnPUtil -i -a qcmdm.inf
and then type:
Code:
PnPUtil -i -a qcser.inf
15) Reboot your PC
Now you should have the Qualcomm CDMA Technologies MSM drivers installed.
What is it for?
ybregeon said:
What is it for?
Click to expand...
Click to collapse
How to install Qualcomm Drivers for people who are having trouble installing the drivers.
Just explain that you mean the PC drivers. Some might get confused and think you mean Qualcomm bootloaders in the phone.
Sent from my Lumia 800 using XDA Windows Phone 7 App
for xp??
ok i am with nokia lumia 710 and i am trying to write new os,but it wants this drivers "qualcomm cdma technologies msm" pls help,i am on xp,my phone have unlocked qualcomm bootloader
info
hi.
I succeeded in no way, unfortunately the third already does not settle. but Windows 7 64 bits of my system yes. May this be the trouble?
PnPUtil -i -a msmdm.inf (installed o.k.)
PnPUtil -i -a qcmdm.inf (installed o.k.)
PnPUtil -i -a qcser.inf (not installed, platform compatibility problem. )
i very sad! i flashed (my lumia 710 prototype rainbow rom with lumia 710 douwnloader. the rom is okay, but i have no call sound!!!! i want the original firmware . but nss not see the lumia help
Adrammelech said:
PnPUtil -i -a qcser.inf (not installed, platform compatibility problem. )
Click to expand...
Click to collapse
looks like you need x64 drivers...
Worked on x64 Windows 7. Thanks very much for this
hasn't worked for me, still shows up as drivers not installed in Device Manager. When I point towards the files it doesn't accept them or if I do a computer/internet search. Just says driver cannot be found.
Any ideas?
---------- Post added at 10:07 PM ---------- Previous post was at 10:03 PM ----------
RHodgett said:
hasn't worked for me, still shows up as drivers not installed in Device Manager. When I point towards the files it doesn't accept them or if I do a computer/internet search. Just says driver cannot be found.
Any ideas?
Click to expand...
Click to collapse
I should say I am running Windows 7 64bit.
Confirmed that work on Windows 8 dev preview and customers preview with Vista drivers (x86)
Hey, I've done the commands you gave.. All drivers installed correctly like you said.. But When I plug in my lumia 800 windows says it can't find the drivers
What can I do?
Yours sincereley,
Shabo09 said:
Hey, I've done the commands you gave.. All drivers installed correctly like you said.. But When I plug in my lumia 800 windows says it can't find the drivers
What can I do?
Yours sincereley,
Click to expand...
Click to collapse
does your phone come up as a flash disc in restore mode if it doesnt then you dont have a unlocked bootloader regardless if its a qualcomm, there were 2 versions from what i can gather one allows nand access and one doesnt sounds like you have the one that does not
rob:good:
I have problem only with the installation of this....
PnPUtil -i -a qcser.inf
When i try to install this, receive this message:
Can not install the drivers for any of the devices in the system: exhausted the available data (translated from italian)
I need only of this driver for flash, I have an unlocked NAND
OS Windows 7 x64
bombolo85 said:
I have problem only with the installation of this....
PnPUtil -i -a qcser.inf
When i try to install this, receive this message:
Can not install the drivers for any of the devices in the system: exhausted the available data (translated from italian)
I need only of this driver for flash, I have an unlocked NAND
OS Windows 7 x64
Click to expand...
Click to collapse
you dont need the drivers to flash put the phone into nand mode vol+ and power short vibration then plug usb, either flash in linux or in nss
rob:good:
moaster7 said:
These are the Qualcomm CDMA Technologies MSM Windows Vista 32-bit drivers for those of you who are having trouble installing the drivers. I have only noticed this problem on Windows Vista, and therefore I have created this thread.
I have only tested the below procedure on Windows Vista 32-bit.
Please note that I am not responsible for any damages caused to your windows system as a result of wrongly in putting the codes below.
Also note that following the installation of the drivers by this method may result in Test Mode being displayed on your desktop wallpaper.
Let’s get started:
1) Download, extract and place the Qualcomm folder on your desktop.
Installing the certificate:
2) Double click on “qcusbtest.cer” and open it.
3) Click on “Install Certificate.”
4) Select “Place certificate in the following stores”
5) Place the certificate in “Trusted Root Certification Authorities.”
6) Click Next, then Finish.
7) Follow steps 2 to 4
8) Place the certificate in “Trusted Publishers”
9) Click Next, then Finish.
10) Run Command Prompt as administrator (Start>Type “Command Prompt”>Right-click on command prompt and select “Run as administrator”)
In the below steps replace the red [insert] boxes with the relevant configurations of your system.
Next:
11) On command prompt type:
Code:
cd C:\Users\[COLOR="Red"][Insert Your Windows Username Here][/COLOR]\Desktop\Qualcomm CDMA Technologies MSM\Drivers
12) Then type:
Code:
PnPUtil -i -a msmdm.inf
13) You should receive a success message.
14) Repeat for the other .inf files type:
Code:
PnPUtil -i -a qcmdm.inf
and then type:
Code:
PnPUtil -i -a qcser.inf
15) Reboot your PC
Now you should have the Qualcomm CDMA Technologies MSM drivers installed.
Click to expand...
Click to collapse
---
Hello
Does anyone know why I get the following error?
Processing inf : qcmdm.inf
Adding the driver package failed : Access is denied.
Adding at least one driver package failed!
kian1234 said:
---
Hello
Does anyone know why I get the following error?
Processing inf : qcmdm.inf
Adding the driver package failed : Access is denied.
Adding at least one driver package failed!
Click to expand...
Click to collapse
Are you the admin or have the administrators rights to install drivers.
check that 1st.
I got the same 800 with Qualcom CDMA technologies MSM ... so can I flash and full unlock my 800????
I still get Certificate issues after installing your certificate.
Start command prompt as admin and type "shutdown -o -r -t 0"
disable driver signatures
Now installed drivers fine, going to restart now hope it works
Using windows 8 x64
After installed this drivers NSS pro didnt recognize my lumia 710
before driver
when i click on "READ INFO" it answer me correct
now
Checking selection...Supported(USB) interface selected.
Init connection...Done.
----------------------------------------------------------------------
Phone details:
-----------------
NCSD Version: N/A
SW Version: N/A
HW Version: N/A
IMEI: N/A
Product Code: N/A
Basic Product Code: N/A
Module Code: N/A
Production SN: N/A
Battery life: N/A
Number of Nams: N/A
Number of Mins: N/A
ESN: N/A
ESN Decoded: N/A
PRL Version: N/A
Battery Charge Capacity: N/A
Battery Full Capacity: N/A
Battery Cycle Count: N/A
Battery Temperature: N/A
Battery Voltage: N/A
Battery State of Charge: N/A
Battery Average Current: N/A
Battery Flags: N/A
Battery Standby Current: N/A
Battery MaxLoad Current: N/A
Battery Health State: N/A
Battery Nominal Capacity: N/A
Battery Remaining Capacity: N/A
any suggestions?
regards
moaster7 said:
These are the Qualcomm CDMA Technologies MSM Windows Vista 32-bit drivers for those of you who are having trouble installing the drivers. I have only noticed this problem on Windows Vista, and therefore I have created this thread.
I have only tested the below procedure on Windows Vista 32-bit.
Please note that I am not responsible for any damages caused to your windows system as a result of wrongly in putting the codes below.
Also note that following the installation of the drivers by this method may result in Test Mode being displayed on your desktop wallpaper.
Let’s get started:
1) Download, extract and place the Qualcomm folder on your desktop.
Installing the certificate:
2) Double click on “qcusbtest.cer” and open it.
3) Click on “Install Certificate.”
4) Select “Place certificate in the following stores”
5) Place the certificate in “Trusted Root Certification Authorities.”
6) Click Next, then Finish.
7) Follow steps 2 to 4
8) Place the certificate in “Trusted Publishers”
9) Click Next, then Finish.
10) Run Command Prompt as administrator (Start>Type “Command Prompt”>Right-click on command prompt and select “Run as administrator”)
In the below steps replace the red [insert] boxes with the relevant configurations of your system.
Next:
11) On command prompt type:
Code:
cd C:\Users\[COLOR="Red"][Insert Your Windows Username Here][/COLOR]\Desktop\Qualcomm CDMA Technologies MSM\Drivers
12) Then type:
Code:
PnPUtil -i -a msmdm.inf
13) You should receive a success message.
14) Repeat for the other .inf files type:
Code:
PnPUtil -i -a qcmdm.inf
and then type:
Code:
PnPUtil -i -a qcser.inf
15) Reboot your PC
Now you should have the Qualcomm CDMA Technologies MSM drivers installed.
Click to expand...
Click to collapse
seem to be having a problem while installing those inf files through cmd
getting the following message -
Adding the driver package failed : Invalid INF passed as parameter.
Total attempted: 0
Number successfully imported: 0
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Thanks Bro <3
Sammar Prince said:
Thanks Bro <3
Click to expand...
Click to collapse
No problem
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Help sir, how to fix this error? Thanks
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Help sir, how to fix this error? Thanks
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
Hi thank you i was succesfuly installed this rom and now what to restore IMEI? AT commands not working it says +CME ERROR: 100
thank you in advice i was tryed a lot of forms and i cant make calls, only 4G and SMS, restricted calls
yoalcuadrao said:
thank you in advice i was tryed a lot of forms and i cant make calls, only 4G and SMS, restricted calls
Click to expand...
Click to collapse
don't restore the imei 1 of the phone and put your sim in slot 2, might work now
willkurt27 said:
Help sir, how to fix this error? Thanks
Click to expand...
Click to collapse
did you properly install the mtk drivers ???
Well i hope i would be finally able to unbrick my phone with this... No recovery and fastoboot and by far everything works my device is recognized as mtk device but cannot flash any stock rom with SM Flash Tool
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Requirements:
- SP flash tool and right DA file (provided in the post).
-brom bypass (also provided).
-patience and perseverance.
Steps to install:
1)steps to install brom bypass:
-first install python 3 (check on google)
- then run this code in a cmd
Code:
pip install pyusb pyserial json5
-after that make sure to have all the mediatek drivers installed and install libusb from the archive i provided
- after installing libusb you will be greeted by a filter wizard window, check the "install new device filter" then connect the phone to the pc while pressing (volume +, volume - and power button) all at the same time you
will see in the list a new mtk com port appear click on it and then on install, done with the prep'.
2)steps to flash:
-first launch the brom bypass, a window will appear saying 'waiting for bootrom' connect your phone while pressing (volume +, volume - and power button) all together then you will see on the command prompt 'protection disabled' it means you have successfully bypassed the brom.
- now oppen up sp flash tool, select the download agent, select the scatter fille from the rom folder and the auth file (provided with sp flash tool archive on the post) then setup sp flash tool in uart mode with a bud rate of 921600 then flash in format all.
-done.
Hope this helped, cheers !
Click to expand...
Click to collapse
thank very much bro
muito obrigado, tive que usar o META modem para escrever IMEI. so deu certo com essa room, deus te abençoe. BRASIL
----------
MOD EDIT: English Translation Below
thank you very much, had to use META modem to write IMEI. it just worked out with this room, god bless you. BRAZIL
tiagoql said:
muito obrigado, tive que usar o META modem para escrever IMEI. so deu certo com essa room, deus te abençoe. BRASIL
Click to expand...
Click to collapse
in english or indonesia please
hello if I flash this rom to my miui 12.5.1 will this work? or my phone will be stucked in bootloop? sorry im newbie
work.
only write imei simcard 2 brother
razers211 said:
after further testing and finally restoring my IMEIs using this rom, i can say that it is indeed working, so hope it helps a lot of you guys stuck with a phone without IMEIs.
link :
Xiaomi Redmi 9 ENG Firmware (Engineering Rom)
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Click to expand...
Click to collapse
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
What am I doing wrong?
hckbkl said:
work.
only write imei simcard 2 brother
Click to expand...
Click to collapse
which da will i use? DA_6765_6785_6768_6873_6885_6853 or MTK_AllInOne_DA for redmi 9 mt6768
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
try to insert the auth file
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
or install mtk drivers properly
lobothefoots said:
Hello and thanks for sharing, I have the same error as @willkurt27
while using SPFlash Tool
What I do:
Launch bypass.bat
Plug my phone with vol - pressed and battery unplugged.
[2021-08-24 21:33:09.958798] Waiting for device
[2021-08-24 21:39:08.793257] Found device = 0e8d:0003
[2021-08-24 21:39:14.833772] Device hw code: 0x707
[2021-08-24 21:39:14.833772] Device hw sub code: 0x8a00
[2021-08-24 21:39:14.833772] Device hw version: 0xca00
[2021-08-24 21:39:14.833772] Device sw version: 0x0
[2021-08-24 21:39:14.833772] Device secure boot: True
[2021-08-24 21:39:14.833772] Device serial link authorization: True
[2021-08-24 21:39:14.833772] Device download agent authorization: True
[2021-08-24 21:39:14.833772] Disabling watchdog timer
[2021-08-24 21:39:14.849712] Disabling protection
[2021-08-24 21:39:14.849712] Using kamakiri
[2021-08-24 21:39:14.849712] Protection disabled
Appuyez sur une touche pour continuer...
Then I use SPFlash Tool v5.1924.0
Tried with DA_6765_6785_6768_6873_6885_6853.bin and MTK_AllInOne_DA.bin
View attachment 5392951
What am I doing wrong?
Click to expand...
Click to collapse
use mtkbypass