Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
I am searching but have not lucked up on the correct search words for an answer...
New Verizon HTC6800 updated the 3.12 and radio 3.39. I noticed voice activation was not on the phone so I searched and found a thread that said add:
Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab
So first was that correct? OK ,I did that and got voice command back to make calls holding the device. What I cannot do which I could do with the OEM was:
Turn on my Jaw Bone BT headset (phone BT is on)
Press the button on my BT set
(OEM setup) Would open the voice command box and I speak the name "wife"
Now on the new setup ROM 3.12 when I press the button it goes to the phone screen where I can dial a number which I do not want. I am sure there is a easy fix and hate to waste a post so can someone share that with me. I want to be able to press the button on BT set and hear the beep in my ear so I can speak a command to call a number?
Thx
Sounds like you want Microsoft Voice Command?? Not the Cyberon Voice Dialer. Cyberon requires self created voice tags if I remember correctly...MSVC just requires you to push your BT headset button and speak the command.
is that my only option....anyone else...vets???
What did you end up doing about this?
Is there any to get rid of the automated speach recogniztion other than building a custom rom without it? I really like using the cyberon voice speed dial but I can't. I installed it and made voice tags but everytime I press the button on my bluetooth the asr program starts intead. I have gone into the voice command setting and disabled it for contacts and phone but that didn't help.
... that will actually allow you to confirm YES or NO before dialing. My old WM6 phone had that built in (Windows Voice Command), but Android stock voice dialer does not. It can get fairly problematic if you have business contacts on your phone, and you try to call a friend and it mishears and dials them straight away.
Any recommendations are appreciated.
Try Vlingo. It's pretty spot on as is but gives you a good few seconds to cancel the dial.
another +1 for vlingo
+1 for vlingo, been happy with it since my blackberry days
Hey guys I'm rooted and what not I have google now enabled so when I say OK google I can voice dial or what not just fine.
But if I have my screen off and try to use voice dial with my BT headset it uses a really shi**y voice dial I've never seen before. How can I change that? To be like my moot x or nexus phones ? They have a much better voice dial system...
Thanks for any help.
gitit20 said:
Hey guys I'm rooted and what not I have google now enabled so when I say OK google I can voice dial or what not just fine.
But if I have my screen off and try to use voice dial with my BT headset it uses a really shi**y voice dial I've never seen before. How can I change that? To be like my moot x or nexus phones ? They have a much better voice dial system...
Thanks for any help.
Click to expand...
Click to collapse
I use Bluetooth Launch from the Play Store. With that you can choose to use Google Search with a long press from your BT headset. It's not perfect, but it's a heck of a lot better than that crappy Google Dial.
Thanks bud I will try it and see how it works...
That app does not work any other ideas?
gitit20 said:
That app does not work any other ideas?
Click to expand...
Click to collapse
The text in the app choices is very small, but if you get out your magnifying glass and follow the directions here, it will work: http://hackerspace.lifehacker.com/reassign-your-bluetooth-phone-button-to-open-google-n-1507391132