Related
Titan Radio ROM 3.27.00
NOTE 6/19/08:
There is absolutely no reason for anyone to be using this radio anymore. If you are looking to upgrade from 1.x radios, please use 3.35 or later.
DOWNGRADING TO THIS RADIO FROM 3.35 OR ABOVE WILL BRICK YOUR DEVICE.
This radio enables GPS and EvDO rev A.
DOWNLOAD:
REMOVED
how do we get bootloader 2? or even know that i have it? hopefully this will fix how when ever i hand up i loose singal for a few seconds and it seems i go in and out a lot when i should have good signal.
That's 2.04
thanks...ill try and wait...oh i hate waiting
can anyone post a link that is non rapidshare to the loader we need? thanks alot.
friguy33 said:
whats 2.04?
Click to expand...
Click to collapse
the bootloader. its what comes with the newest rom.
the rom is not released so unless you snaged it from here tonight you wont have it.
I was reading instructions by IMCOKEMAN - does anyone know if we can keep the 1.20 Olipro and do these instructions?
EDIT by ImCoKeMaN:
I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.
To do this there are 3 steps:
First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh
Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.
Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Aximus, where did you get 2.40 olipro?
aXiMus said:
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?p=168746#post168746
Here is the link your looking for.
having trouble installing the titan radio 3.27.00
when i run the file and my phone starts to update it malfunctions.......my usb port seems to disconnect on its own but physically its still connected.... can u help me??
it might just be me, but it seems that this radio doesnt work correctly with vzw text messages or mms. i am able to recieve sms but cant send, and can send mms but not recieve.
elgreek84 said:
Aximus, where did you get 2.40 olipro?
Click to expand...
Click to collapse
I got from a file called 3.16_GPS_rom__and_patched_2.05spl. I think it was ppc geeks, I am running the sprint rom on my Telus phone. Going to go back to 2.17 and Radio 2.06 seems to work better. Besides don't need GPS on my phone at this time, as I have in dash GPS.
anyone able to get MMS working on verizon? or just data in general to work on verizon?
friguy33 said:
anyone able to get MMS working on verizon? or just data in general to work on verizon?
Click to expand...
Click to collapse
Data works fine. I'll get back to you on the MMS in about 5 minutes.
MMS works fine.
DO we have to RELOCK?
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
sudermatt said:
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
Click to expand...
Click to collapse
I didn't. I flashed the new unlocker straight from the 1.4, then radio and then the new ROM.
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
hay112 said:
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
Click to expand...
Click to collapse
I also am curious of this as i miss having my cooked dcd rom kitchen, either way im sure a new kitchen will be released anyways, and gps is pretty neat
I'd like to upgrade my VZW XV6800 to DCD's Titan 3.1.2 with radio 3.39.10, but have some questions. I've read the Wiki and FAQ several times through, but am having a hard time understanding the correct order of upgrading the radio and ROM.
I've successfully upgraded bootloader to 2.40 using Hard-SPL-MFG.exe
Do I next upgrade the radio? Or do I load DCD's 3.1.2 and then upgrade the radio? (After writing that out I think I would upgrade the radio...looking for confirmation.)
Radio or you will be screwed. I speak from experience. Get a SD card and use that method.
good advice on both accounts.
did the radio first, but was then unable to get past the bootloader and unable to connect w/ ActiveSync. followed the SD directions and now i'm running everything i wanted!
I Flashed ROM Then Radio
Tonight I just finished successfully flashing my phone for the first time. I updated the boot loader using titan_SPL_2.40-olipro.exe, then I attempted to update the radio but actually did not due to a mistake on my part, then I successfully updated the ROM to dcd_titan_3.1.2.exe. Upon a restart, I realized the radio was not updated based upon the Verizon splash screen so I re-entered the bootloader and eventually flashed the radio. Once I finished flashing the radio I restarted and was presented with WM 6.1 and a usable phone.
Easy Way
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
Click to expand...
Click to collapse
The Alltel rom has Radio 3.37.20, not 3.39.10.
schwillyd530 said:
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
Click to expand...
Click to collapse
Also not everyone has to call Verizon. I have flashed once to stock, DCD 3.0.4 and DCD 3.1.20 and have yet to call or reenter anything.
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
I went from stock to 3.2.0 / Radio 3.42.02.. no problems.
I have not loaded 2.42.30 (I prefer to use the radio version released by HTC for this device.. 3.42.30 was released for another device and ported.. although it seems to work for everyone.)
I HAVE read that for radio 3.42.30 you need SPL 1.20 for USB Flashing.
gc14 said:
Yeah 1.20 is needed to flash these radios via USB. Just need to put 2.40 back when you're done.
Click to expand...
Click to collapse
Based on that.. I assume SD flashing is ok with 2.40.
scotcha12345 said:
... (maybe thinking the Radio needed to be installed for it to get through)....
Click to expand...
Click to collapse
Yes! This is well documented.. a common issue.
If you flash the Rom without a compatible radio.. you will get stuck on the verizon screen... I suggest flashing the ROM AFTER the radio.. since you flashed the Rom already... when you get the radio working, Reflash the ROM.
Did you flash the radio via SD Card or USB?
Did it show a progress bar while flashing?
Let us know how your attempting to flash the Radio (USB or SD) With specific steps (held buttons X, Y, and Z.. saw this message, pressed this key.. saw this on the screen) .. and someone will let you know what you might be doing wrong.
Also.. dont forget to run the carrier cab when your done.. This is worth mentioning since it's the most common issue once the device boots and you cant program the phone, or make data / voice connections.
scotcha12345 said:
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
Click to expand...
Click to collapse
Can you get to the bootloader by holding down camera power and pushing the reset button? If so, you can flash the radio with the SD method found in the wiki. just put the radio on the sd card in the proper format and enter bootloader and it should correct your problem.
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Responses
Hey guys,
Thanks for the responses and suggestions.
1) At the moment he doesn't have an SD card aside from the SDHC, so he couldn't do that until he purchases one. Good idea though if nothing else works
2) When pressing the camera/power/reset he's in the SPL 2.4 bootloader screen, he's going to try your suggestion of downloading Sprints and upgrading.
3) I'll ask him procedurally what else he has tried, what error he gets for recording. No doubt you were correct about uploading the Radio before the ROM
I've actually flashed my phone exactly the same way he has so that I can try to experience the same problems, and try to figure it out myself.
Bingo
Hey,
The Sprint ROM .exe was the answer. Very smart, thanks again for helping us both out. Was getting a little nervous for about 2 minutes.
useful=helper++
I did the same thing. Thank you very much...saved my butt!
BC
its alive
spreeway said:
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Click to expand...
Click to collapse
you saved my titan...thanks guy!
I currently have a Verizon Wireless fully flashed to cricket XV6800. I decided to know about hacking the Mogul so what I try to do was Look up WMDC 6.1 and apply it to my phone. When i did this the screen stopped at 11%. I took out the battery and tried to turn it on and i get a Red, Green, and Blue color on the start up screen. The words that are on the phone are TITA100 SPL-1.20.Olipro and on the bottom it says USB when connected and Serial when not connected. I looked every where to and figure it out how to get my phone back to the same way. I downloaded so many programs like Titan Unlocker, Titan exitbl, but all these programs do is say my phone is not connected when it is connected. I hear the Sound when the connection for the USB is connected and disconnected. What can i do Will i ever get my phone back to the same state that it once was. I was wondering also that since my phone was flashed that the software will be erased. Is there any way that I can get my Cricket Service. By the way before i did all the hacking what i did was back everything up on the memory card. Is there a way I can restore that through the phone even though i cant access the menu?
I'm going crazy--Thank you for your time to read and for those who can give me some word of advice or some way that my problem can be solved.
Thank you
if u are using xv6800.. i believe u have to install bootloader 2.40 or 2.47.. maybe that might be the problem when installing wm6.1
First, your phone is not bricked.. bricked means broken.. unfixable.. a brick!
You also need to let us know what you software you want to run... DCD 3.2.6?? WMDC 6.1 is Windows Mobile Device Center.. it's not a rom?? So I dont know what you tried to flash.
You need to read the instructions!! Sounds like You upgraded your rom (or tried to) with a non compatible bootloader.. if you dont want to bust your $200 - $500 phone perminently.. you should read the directions twice.. (I read them 4 times, then asked questions before the first time I flashed mine)
When you plug in the device and hear the usb sound.. check device manager.. make sure you see a usb device.. Your OS shoul have installed drivers... Then try the info below.
scrosler said:
1. Download OliPro 2.40 and run it. Ignore the part that asks you to verify the Active Synch connection. Its not needed for anything but a connection confirmation.
2. After running OliPro 2.40 you should be stuck at the three color bootloader screen, Like you are now. If not hold Camera and Power and use stylus to put phone in bootloader. Make Sure it says OLIPRO 2.40 for the version on the bootloader. If not then re-run oliupro and make sure to follow the directions. Especially noting that it asks you to disconnect then reconnect the device.
Click to expand...
Click to collapse
After that you can Flash a Radio, then a rom (I recommend the SD method)
And the versions in my signature.
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
You should also read this WIKI
http://wiki.xda-developers.com/index.php?pagename=TitanProblems
If you cant flash SPL 2.40 you will need to flash back to a ROM compatible with SPL 1.20
Read here: http://forum.xda-developers.com/showthread.php?t=392133
I'd try to grab one of thoise older Roms and flash using SD card method.
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
And dont forget to install carrier cab.
I can't seem to connect my xv6800 to the computer so I can run that program.
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
loc37 said:
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
Click to expand...
Click to collapse
Then you need to get a Rom and radio compatible with SPL 1.20.. You'll need a SD card thats Equal to or less than 2GB (NON SDHC)
Check the compatibility here: http://forum.xda-developers.com/showthread.php?t=392133
Read the instructions for flashing this here:
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
Check the Flashing with a SD card section.
Process is the same for the radio and the rom.
I cant seem to find an available rom that you need though.. I'll post back when i do.
Unless someone else has a trick for you...
You can also try a another machine that may recognize your phone.
What did you actually try to flash your phone with, and how did you do it.. this is important to help you.
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
loc37 said:
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
Click to expand...
Click to collapse
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
im1badazchick said:
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
Click to expand...
Click to collapse
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
loc37 said:
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
Click to expand...
Click to collapse
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
im1badazchick said:
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
Click to expand...
Click to collapse
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
flyers2114 said:
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
Click to expand...
Click to collapse
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
Usually that means you have the wrong build of MSVC installed use build 19209...
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
if you now have the correct bootloader and radio...try flashing with a pre-cooked rom like dcd 326 or the rom from the links that i gave you...the popular one was the black pill and there is one that's specifically for cricket
do I just google that build number or is there a specific program I should download?
Thanks
loc37 said:
do I just google that build number or is there a specific program I should download?
Thanks
Click to expand...
Click to collapse
LOL..no if you lookk about five post up you will see DCD 326 and as for the other from vetvito it was in one of the links that i first posted for you
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
Did you read any of my posts...
Hrm.. could have sworn I addressed this already.
x51 said:
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
Click to expand...
Click to collapse
x51 said:
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
Click to expand...
Click to collapse
I included links, and all the information you would need.. (Like the Rom/Radio/SPL compatibility list) yet you didn't read it.
I spent time finding those links, downloading a rom.. cooking it for you, and uploading it to my webserver so you can download it.
x51 said:
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
Click to expand...
Click to collapse
I also explained that once you boot into windows with that rom, you need to upgrade your bootloader to 2.47 (with instructions) and then your radio, and then rom.
The path was simple..
Flash dcd 1.6.10 (compatible with SPL 1.20) so the phone will boot
Upgrade SPL (bootloader to 2.47)
Flash new radio (3.47.50)
Flash new Rom (3.2.6)
Run carrier cab.
If you are still asking about where to get the (SPL) bootloader.. I guess I cant help you....
Is there a HSPL for the AT&T Titan yet? Goldcard didn't work Trying to flash stock rom worked, but didn't downgrade SPL So, I diffinetly need HSPL for a branded AT&T Titan. Thanks
Take a look over here at forum.xda-developers.com/showthread.php?t=1744253. You'll have some reading to do.
If you tried the SPL / HSPL on your AT&T Titan first (before debranding) then you are stuck without a fix (as of yet).
I was in the same boat and my Titan had a memory issue and caller's sound quality was horrible, so I got a warranty exchange from AT&T. When my new one arrived, I de-branded it first with the EUR ROM, then flashed SPL / HSPL and now I absolutely LOVE my Titan (prior, I HATED it). Now (after 6 replacements & no AT&T locks) I have a custom ROM and everything is unlocked and no caller sound quality / memory problems.
Sucks for me then...
GreenGrenadez said:
If you tried the SPL / HSPL on your AT&T Titan first (before debranding) then you are stuck without a fix (as of yet).
I was in the same boat and my Titan had a memory issue and caller's sound quality was horrible, so I got a warranty exchange from AT&T. When my new one arrived, I de-branded it first with the EUR ROM, then flashed SPL / HSPL and now I absolutely LOVE my Titan (prior, I HATED it). Now (after 6 replacements & no AT&T locks) I have a custom ROM and everything is unlocked and no caller sound quality / memory problems.
Click to expand...
Click to collapse
Thanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.
Well they didn't know it was going to he different. In all my HtC devices, this is the first that has been different and the most complicated I must say.
Sent from my Lumia 900 using XDA Windows Phone 7 App
franchize1989 said:
Thanks for the info. I guess I will have to wait til developers come up with something for AT&T Titan. I wised the instructions included info for SPL/HSPL on AT&T Titan, Oh well.
Click to expand...
Click to collapse
Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it first
V. HSPL
i. Once confirming you have 2.5.xxxx.xx on your SPL screen, you will now proceed to the final part: enabling HSPL. What you will need to do is navigate once more into "DFT_HSPL_WP7SG1" (the .rar file you downloaded from DFT), and go here: >DFT_HSPL_WP7SG1>2_HSPL>DFT_HSPL_WP7SG1_INSTALL.ex e. Open the executable and properly read the instructions.
ii. Enter SPL once more on your phone and plug it into your computer, making sure that it says "usb" in black letters towards the bottom portion of the screen.
iii. Click next on the program and read careful about what requirements you will need on the computer. Typically, it should all be there, but it never hurts to make sure.
iv. Take a deep breath and click next. It will attempt to connect to the phone. If it succeeds, continue reading the instructions the program will display. If it does not work, recheck your wire connection and that you have spl 2.5.xxxx.xx on your device, and that it is in SPL mode.
v. Make sure you select the rom version that you have (it should be the only selection there, but just make sure it is before continuing). Select next once you've made your selection.
vi. It will install HSPL. Once completed, the phone may reboot itself back into SPL mode. If it has succeeded, underneath where it shows your rom version, it will either have "DFT" or "CotullaH" written there. Mine says "CotullaH".
Click to expand...
Click to collapse
pbp8ntballer said:
Hello, if you actually checked the bottom of the guide I've written for this, it provides instructions on how to apply HSPL for your Titan, assuming you did all the correct steps on debranding it first
Click to expand...
Click to collapse
I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.
I haven't seen a warning to USA AT&T Titans anywhere that should say to de-brand your Titan first before attempting the HSPL or you'll be stuck.
Your outline will not help this person where he is stuck. Cotulla is working on it (I do believe).
There are a few warnings on the developer forum that AT&T branded phones must first be debranded before the phone can flashed with other roms
Ok, if you say so.
malvo26 said:
There are a few warnings on the developer forum that AT&T branded phones must first be debranded before the phone can flashed with other roms
Click to expand...
Click to collapse
by getting my AT&T Titian stuck at SPL 2.5
does this mean my phone is locked from any future customization?
that would really suck
franchize1989 said:
by getting my AT&T Titian stuck at SPL 2.5
does this mean my phone is locked from any future customization?
that would really suck
Click to expand...
Click to collapse
Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?
Easy to follow thread for hspl
http://forum.xda-developers.com/showthread.php?t=1684912
If you have the image (or .nbh file) and you dont have it names ETERIMG.nbh it will not flash
here's why, The HTC OEM's names the device eternity. For the USB mode to be able to recognice the correct rom to flash it has to fit the model of phone you have. ETER is the first 4 letters to its OEM name. Add IMG and you got yourself the correct name for flashing roms to your device.
GreenGrenadez said:
Not totally. You can still update the OS thru cab loader method to Tango and I assume soon after the 7.8 is released you'll be able to do the same. The only thing is you are stuck with crappy stock AT&T ROM. I say crappy because I absolutely hated my phone until I got custom ROM on it. Can you do a warranty exchange with AT&T?
Click to expand...
Click to collapse
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
franchize1989 said:
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
Click to expand...
Click to collapse
Cotulla is working on it (I do believe). I stopped reading the thread (http://forum.xda-developers.com/showthread.php?t=1684912) when I got my new device in and de-branded it first (there by preventing the situation that you are in), however, where I left off in my following that thread was Cotulla asking for USA AT&T testers. I have followed the email notifications that I get from that thread, and nothing new that I've seen. On pages 25 - 28 you'll find that Cotulla is (or was) working on it.
So to answer your question, I tried everything when I was stuck on SPL 2.5 and nothing worked. You are stuck on AT&T stock ROM for now. Maybe throwing $$ at Cotulla would speed the process up?:fingers-crossed:
Hope this helps
franchize1989 said:
I'm not sure if I have a warranty... I don't think I purchased it. Trying to understand, there's no fix to my situation as of right NOW... But somehow, can developers come up with a fix you think? Or, no matter what, I'm stuck with the stocked ATT Rom?
Click to expand...
Click to collapse
Hi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:
1. Flashed stock Cingular rom 1.10 using RUU. This brings my Titan from euro Tango rom to stock cingular rom. However the SPL version was stucked at v4
2. Out of desperation, I flashed the stock TEST Cingular rom 2.01 from this thread: http://forum.xda-developers.com/showthread.php?t=1477189 again using RUU.
3. Please note that cingular rom 2.01 is a demo/test rom so its not functional.
4. RE-flashed stock Cingular rom 1.10. This time around it downgraded my SPL from v4 to the stock v1.10
Give this a try, and report back. If it works please before trying again to flash HSPL, debrand your titan to euro rom 2.05 using goldcard method
Goodluck.
habnzrot said:
Hi, I'm currently on a debranded ATT Titan HSPLed with custom rom. Previously I managed to downgrade my SPL from euro v4 back to stock Cingular rom v1.10 These are the steps I took to downgrade:
1. Flashed stock Cingular rom 1.10 using RUU. This brings my Titan from euro Tango rom to stock cingular rom. However the SPL version was stucked at v4
2. Out of desperation, I flashed the stock TEST Cingular rom 2.01 from this thread: http://forum.xda-developers.com/showthread.php?t=1477189 again using RUU.
3. Please note that cingular rom 2.01 is a demo/test rom so its not functional.
4. RE-flashed stock Cingular rom 1.10. This time around it downgraded my SPL from v4 to the stock v1.10
Give this a try, and report back. If it works please before trying again to flash HSPL, debrand your titan to euro rom 2.05 using goldcard method
Goodluck.
Click to expand...
Click to collapse
this dont work to go back to 1.1 spl to start over
we need cotulla to work it out
elmanortega said:
this dont work to go back to 1.1 spl to start over
we need cotulla to work it out
Click to expand...
Click to collapse
Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.
GreenGrenadez said:
Exactly what I've been saying. The only out right now, is to send it back to AT&T and trade for another one.
Click to expand...
Click to collapse
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
pjodm said:
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
Click to expand...
Click to collapse
At this point, I'm deperate. Thanks for the advice, I will be sure try this method and hope for the best. I'll try to keep everyone updated with my results in this thread. Thanks again :good:
GreenGrenadez said:
I know exactly where he is stuck because he is using USA AT&T Titan. The HSPL instructions doesn't warn USA AT&T Titans owners of the issue (AND IT SHOULD). So, if you following the procedure that every custom ROM points to exactly (like I did and a lot of other people did) you will be stuck on 2.5 SPL with no way out.
I haven't seen a warning to USA AT&T Titans anywhere that should say to de-brand your Titan first before attempting the HSPL or you'll be stuck.
Your outline will not help this person where he is stuck. Cotulla is working on it (I do believe).
Click to expand...
Click to collapse
My outline comes from the guide I made specifically for AT&T phones that need to do in order to safely debrand and install hspl.
So, if the person went to read the guide fully (where I mention several times that this process is required if they wish to install custom roms) then they can find that they'd be most likely be able to install HSPL after using my debranding method.
My AT&T Titan has HSPL applied and running a custom rom, and there's a picture guide provided in the post to show it.
However, I agree, I do not see any warnings that normally, you can't install HSPL on an AT&T HTC Titan all by itself without debranding. Honestly, there should be, because I can't count how many posts I've seen of people soft-bricking/bricking their devices.
EDIT: However, I guess I forgot to add, you cannot do anything after you applied the custom 2.5 SPL provided by DFT, IF you didn't debrand it prior. If you did debrand your phone, obviously you'll be fine. If you haven't though, then you'll be stuck along with everyone else and you'll need to get a new phone or wait for the fix.
pjodm said:
Hello there,
I had the same situation on my AT&T Titan for 2 weeks, thinking it was my Gold Card or SD, but I finally upgrade the HTC SPL to the official 2.6 from June update.
Then I reflash the Stock AT&T Rom, but the SPL remain at 2.6.
Then I quit for a while. Removed the battery for a couple of days, & tried the Debranding again using the IMG_Eternity_HTC_Europe_2.05.401.01_Radio_Signed_16.23.06.10_16.32.00.23_ETERNITY_RELEASE.nbh, renaming it to ETERIMG.nbh & Goldcard my phone onto this EU Rom.
Then the SPL was downgraded from 2.6 to the EU 2.5.
After that I proceeded to the DTF SPL2.5 & HSPL & voila, the custom Roms.
Hope it help.
Click to expand...
Click to collapse
If this actually works, we need to spread the news about. There are still a bunch of AT&T Titans locked out there on SPL 2.5. franchize1989, OP, give us an update if it worked or not. Good luck