Related
I saw something here about this from azclown and really want to know if it is true.
After flashing nueSPL is it possible to downgrade to other bootloaders?
I tried to run unlocker (Olipro 1.20) and it wouldn't connect right. Do I need to use relocker then load 1.20 then load stock rom. I am testing this out for another phone right now and am a little curious why this would be created so that no other bootloaders could be reloaded.
What I am realizing is that this bootloader is not such a good idea for Verizon users, being that they will not be able to revert to the stock rom (as Verizon has not released a GPS Rom yet).
Am I right here?
serfboreds said:
I saw something here about this from azclown and really want to know if it is true.
After flashing nueSPL is it possible to downgrade to other bootloaders?
I tried to run unlocker (Olipro 1.20) and it wouldn't connect right. Do I need to use relocker then load 1.20 then load stock rom. I am testing this out for another phone right now and am a little curious why this would be created so that no other bootloaders could be reloaded.
What I am realizing is that this bootloader is not such a good idea for Verizon users, being that they will not be able to revert to the stock rom (as Verizon has not released a GPS Rom yet).
Am I right here?
Click to expand...
Click to collapse
um, DO NOT attempt to DOWNGRADE your SPL unless you want a permanent brick.
reasoning:
ALL ATTEMPTS whatsoever to downgrade the radio to a pre-GPS radio have F-A-I-L-E-D. They have all resulted in BROKEN BRICKED IRREPARABLE devices.
1.xx SPLS are not (at least that i'm aware of, compatible with GPS radios)
therefore, you cannot downgrade your radio to 1.xx.
You can downgrade to olipro-2.40, but thats pretty much it. Unless your device is SuperCID, i would NOT ADVISE locking your device, because you will only be able to download updates signed by VZW, and as we all know - there are none.
If warranty is a concern,... it would be better to turn in a complete brick than a partial brick. flash a modified VZW OS Only with proper OEMDRIVERS, then run my relocker and lock the SPL down, then warranty it. /... I wouldn't suggest this for anything else, because in case of a bad OS flash, you'd be pretty screwed...
Thanks for chiming in on this no2chem, there's a lot of good information in that post!
no2chem said:
um, DO NOT attempt to DOWNGRADE your SPL unless you want a permanent brick.
reasoning:
ALL ATTEMPTS whatsoever to downgrade the radio to a pre-GPS radio have F-A-I-L-E-D. They have all resulted in BROKEN BRICKED IRREPARABLE devices.
1.xx SPLS are not (at least that i'm aware of, compatible with GPS radios)
therefore, you cannot downgrade your radio to 1.xx.
You can downgrade to olipro-2.40, but thats pretty much it. Unless your device is SuperCID, i would NOT ADVISE locking your device, because you will only be able to download updates signed by VZW, and as we all know - there are none.
If warranty is a concern,... it would be better to turn in a complete brick than a partial brick. flash a modified VZW OS Only with proper OEMDRIVERS, then run my relocker and lock the SPL down, then warranty it. /... I wouldn't suggest this for anything else, because in case of a bad OS flash, you'd be pretty screwed...
Click to expand...
Click to collapse
True, I see your point about returning a complete brick. The rest is fine I guess.
Thanks!
no2chem said:
:
ALL ATTEMPTS whatsoever to downgrade the radio to a pre-GPS radio have F-A-I-L-E-D. They have all resulted in BROKEN BRICKED IRREPARABLE devices.
Click to expand...
Click to collapse
now, by that do you mean they werere were bricked by downgrading the radio with nueSPL previously (or currently) loaded on the device, or downgrading the radio on a device that never had nueSPL loaded on it?
the only reason i ask this is because ive done several radio downgrades from olipro 2.4 to 1.2 to the stock radio/ROMs for refurbishment and ive never had a problem. i dont use the stock SPL because theres no tech around here smart enough to check it.
no2chem said:
um, DO NOT attempt to DOWNGRADE your SPL unless you want a permanent brick.
reasoning:
ALL ATTEMPTS whatsoever to downgrade the radio to a pre-GPS radio have F-A-I-L-E-D. They have all resulted in BROKEN BRICKED IRREPARABLE devices.
1.xx SPLS are not (at least that i'm aware of, compatible with GPS radios)
therefore, you cannot downgrade your radio to 1.xx.
You can downgrade to olipro-2.40, but thats pretty much it. Unless your device is SuperCID, i would NOT ADVISE locking your device, because you will only be able to download updates signed by VZW, and as we all know - there are none.
If warranty is a concern,... it would be better to turn in a complete brick than a partial brick. flash a modified VZW OS Only with proper OEMDRIVERS, then run my relocker and lock the SPL down, then warranty it. /... I wouldn't suggest this for anything else, because in case of a bad OS flash, you'd be pretty screwed...
Click to expand...
Click to collapse
No2chem.. I think I am an exception or my XV6800 must be special because I actually messed up my phone because i wanted the new Radio 3.42.02 but couldn't get my Phone to Flash From SD.. So I had to flash a sprint 3.56 ROM to get the Radio and then flashed Verizon kitchen before Sprint customization started.. but for some weird reason.. Sprint customization still ran after i flash the Verizon ROM.. My EPST Settings were all Sprint.. lols..
These are the steps I took to bring it back..
1. Ran Titan_Relocker to relock SPL from version 2.40 Olipro
2. Flashed Stock Verizon ROM and let Verizon Customization run
3. Unlock using NueSPL2.47 letting it format my SD card to enable Flashing from SD [Thank GOD you added this feature]
4. Placed the new Radio 3.42.30 onto my SD card and enter Bootloader and Flashed it [Thanks to You]
5. then flashed my Verizon kitchen.. All with no problem..
I've discussed this method with some of the guys over at PPCKitchen.org and they were concerned about me bricking my phone.. but I said oh what the heck.. my phone is already messed up..
every one was supprised that it worked.. lol.. I must be one of the lucky few..
b16daddy said:
No2chem.. I think I am an exception or my XV6800 must be special because I actually messed up my phone because i wanted the new Radio 3.42.02 but couldn't get my Phone to Flash From SD.. So I had to flash a sprint 3.56 ROM to get the Radio and then flashed Verizon kitchen before Sprint customization started.. but for some weird reason.. Sprint customization still ran after i flash the Verizon ROM.. My EPST Settings were all Sprint.. lols..
These are the steps I took to bring it back..
1. Ran Titan_Relocker to relock SPL from version 2.40 Olipro
2. Flashed Stock Verizon ROM and let Verizon Customization run
3. Unlock using NueSPL2.47 letting it format my SD card to enable Flashing from SD [Thank GOD you added this feature]
4. Placed the new Radio 3.42.30 onto my SD card and enter Bootloader and Flashed it [Thanks to You]
5. then flashed my Verizon kitchen.. All with no problem..
I've discussed this method with some of the guys over at PPCKitchen.org and they were concerned about me bricking my phone.. but I said oh what the heck.. my phone is already messed up..
every one was supprised that it worked.. lol.. I must be one of the lucky few..
Click to expand...
Click to collapse
weird. what were you running before step 1?
the problem seems to manifest itself when you take a GPS radio, and flash a 2.xx RADIO onto it. When you flashed the verizon stock rom, are you sure you had the 2.xx radio on it?
the reason everyone was concerned about your phone though, was because there were several bricks produced by downgrading radios - ask ImCokeMan, he'll tell you..
no2chem said:
weird. what were you running before step 1?
the problem seems to manifest itself when you take a GPS radio, and flash a 2.xx RADIO onto it. When you flashed the verizon stock rom, are you sure you had the 2.xx radio on it?
the reason everyone was concerned about your phone though, was because there were several bricks produced by downgrading radios - ask ImCokeMan, he'll tell you..
Click to expand...
Click to collapse
I didn't quite understand your question..
"When you flashed the verizon stock rom, are you sure you had the 2.xx radio on it?"
When I ran Titan_Relocker.. it installed version 1.06..
Before the Sprint radio upgrade I had...
Hard SPL2.40 Olipro
Radio 3.39.10
No2chem wm6.1 5067 Kitchen
I have also went from a GPS radio to the stock verizon radio/rom a few times because of accidentally letting sprint customizations run.
i am not 100% sure if i had the stock radio on my phone. however it worked with stock verizon rom and phone/ data/ text all worked in stock verizon rom/radio.... so i assume it was the correct radio since it worked with the stock rom...?
EDIT: i do believe i had verizon 1.3 radio on my phone after flashing back from a GPS radio
also i remember reading somewhere that if you do flash back to a stock radio/ rom that it might say stock radio but it will still have components of the gps radio's... i think i read it at ppcgeeks
aguas said:
ive done several radio downgrades from olipro 2.4 to 1.2 to the stock radio/ROMs for refurbishment and ive never had a problem. i dont use the stock SPL because theres no tech around here smart enough to check it.
Click to expand...
Click to collapse
i also have downgraded radio from 3.xx to 1.xx without any problems.
I flashed back to non gps as well. I was having bad experiences with dcd's 2.x so I went to his 1.7. No issues flashing at all.
I have also downgraded to 2 different phones from GPS radios to NON-GPS radios.... Verizons stock radio is 1.30, not a 2.x radio, so that may be the issue for some other folks on different carriers.... It may be an incompatibility with 2.x radios and GPS radios.... I have a folder on my desktop that has all the files necessary AND the instructions clearly written out on how to downgrade..... It has saved my butt 2 times now....
azclown said:
I have also downgraded to 2 different phones from GPS radios to NON-GPS radios.... Verizons stock radio is 1.30, not a 2.x radio, so that may be the issue for some other folks on different carriers.... It may be an incompatibility with 2.x radios and GPS radios.... I have a folder on my desktop that has all the files necessary AND the instructions clearly written out on how to downgrade..... It has saved my butt 2 times now....
Click to expand...
Click to collapse
hmm, it might actually be an issue with 2.X radios. I'll do a little bit of research on this one.
no2chem said:
hmm, it might actually be an issue with 2.X radios. I'll do a little bit of research on this one.
Click to expand...
Click to collapse
the radio i downgraded to was 1.59
no2chem said:
um, DO NOT attempt to DOWNGRADE your SPL unless you want a permanent brick.
Click to expand...
Click to collapse
Ya I used to switch from gps to nongps all the time back when the original leaked radio was the only one out... I also converted my last phone (sent in for broken button) back to complete stock vzw (locked and all) as well....
I haven't tried doing any downgrading after installing nueSPL though... are you indicating this is a probelm after flashing nueSPL? Your post has me a 'lil scared now but I'll wait for followups before I attempt anything.. no plans to go back to nongps anyways, though... the new radios seem to have the bugs worked out.
Zenoran said:
Ya I used to switch from gps to nongps all the time back when the original leaked radio was the only one out... I also converted my last phone (sent in for broken button) back to complete stock vzw (locked and all) as well....
I haven't tried doing any downgrading after installing nueSPL though... are you indicating this is a probelm after flashing nueSPL? Your post has me a 'lil scared now but I'll wait for followups before I attempt anything.. no plans to go back to nongps anyways, though... the new radios seem to have the bugs worked out.
Click to expand...
Click to collapse
Only No2chem knows for sure, but after reading his post again I think he's saying you can downgrade to Ollipro 2.4, if thats the case then one should be able to downgrade back to stock as well....
I think no2 is onto something here. I am on VZW also and have gone back to stock from a 3.xx gps radio --> stock 1.30 radio.
I have a feeling that for once we may be glad that verizon never does any updates - they still use 1.30 radio - and that may be the common thread in all our (vzw) success at going back to non gps.
I'd say that I was onto this before him.... He just knows how to verify it...
azclown said:
I'd say that I was onto this before him.... He just knows how to verify it...
Click to expand...
Click to collapse
and i would agree with you!
Speaking of the man himself ^^^^ .. I would note that you had all the data, I just thought it was odd that anyone who tried to go back to a 2.X radio would brick it, while us verizon folks would go back to 1.X and have no issues....
Hi all!!!
I currently have 2.04_003 but I'm having really big trouble to lock on the satellites (30+ minutes, sometimes 1+hours ) so I'm wondrering which is the best PRI...
I have some friends with 2.03_003 and 2.00_004 and they lock on very fast... I'm talking about 10 secs...
Is there a way to change the PRI Version manually?? where can I faind them (I did some search in the forum with no luck)
thanks!!!
I do not know what PRI is but I have version 1.35_002 and I sometimes can never connect but most of the time when I prime it I get a connection within 2-3minutes
PRI Udate
The PRI is seperate from the PRL, and it makes a huge difference on the GPS version.
Search PPC Geeks for the 2.03 PRI. I think it came from the kaiser or the vogue, but it works fantastic on my Sprint Mogul. 2.04 sucked for me.
The PRI is stored in a special NVram seperate from the ROM and Radio. It is updated by installing a .cab file, and then you run \windows\PPST.exe and it will flash it.
Sorry I don't have more direct info, but I just don't have the time to re-search for it right now.
Good luck!
Keep in mind that PRI can be/are carrier specific.
For example since Verizon has yet to release any updates for the XV6800 the only PRI that can be used is 1.35_002.
I had a feeling of that...thats why I didnt jump at the chance to change it....lol
i'm on telus network, can i flash with new telus vogue wm6.1 rom just to get the latest PRI and flash back to dcd's kitchen ? will that mess up my titan ?
belmont said:
i'm on telus network, can i flash with new telus vogue wm6.1 rom just to get the latest PRI and flash back to dcd's kitchen ? will that mess up my titan ?
Click to expand...
Click to collapse
Personally, I don't see that being an issue. But don't quote me on that. If anything, we can get the PPST file CAB out of that release and you can install and run it manually instead of doing a complete flash.
belmont said:
i'm on telus network, can i flash with new telus vogue wm6.1 rom just to get the latest PRI and flash back to dcd's kitchen ? will that mess up my titan ?
Click to expand...
Click to collapse
I am pretty sure I already updated your carrier cab with the latest Telus PRI. You should have an "update PRI" option in settings -> connections.
dcd1182 said:
I am pretty sure I already updated your carrier cab with the latest Telus PRI. You should have an "update PRI" option in settings -> connections.
Click to expand...
Click to collapse
DCD... being that there is a "Test" update out there... could You PM me the "Update PRI" from the "Test" update for Verizon? You know... the PPST file CAB for the new Verizon update. That would solve my stupid "Roaming" issues on my Cloaned Sprint Mogul
DCD I would like that same test file if possible.
i do not have permission to release that.
from what gc14 has said, it disables your GPS anyways.
dcd1182 said:
i do not have permission to release that.
from what gc14 has said, it disables your GPS anyways.
Click to expand...
Click to collapse
I would just use it to overwrite the Sprint PRI and get the ERI correct. Then I would redo it with the VZW original Stock rom... and then your wonderful DCD 3.2.5 and Radio 3.42.50
nitro66215 said:
I would just use it to overwrite the Sprint PRI and get the ERI correct. Then I would redo it with the VZW original Stock rom... and then your wonderful DCD 3.2.5 and Radio 3.42.50
Click to expand...
Click to collapse
The VZW stock ROM does not include a PRI.
The VZW stock extrom contains a cab, "RadioRefurbish"
If you manage to flash a VZW Extrom and VZ stock ROM to your Mogul, RadioRefurbish will run during customizations.
However since your device was originally a Sprint Mogul, I believe that this would restore your default Sprint PRI.
You are correct on what you need, which is an actual PRI update from a verizon ROM update. However I cannot give this to you right now, and I am not sure you would be happy with it even if I could...
dcd1182 said:
However since your device was originally a Sprint Mogul, I believe that this would restore your default Sprint PRI.
Click to expand...
Click to collapse
Yes. This I have tried. I even ran Radio Refurbish manually after I got everything working. It just reloaded the Sprint stuff.. to include the ESN.
dcd1182 said:
However I cannot give this to you right now, and I am not sure you would be happy with it even if I could...
Click to expand...
Click to collapse
Well... I just thought I'd ask. I haven't been using GPS, but tired of the Roaming. Wouldn't I be able to just run that PPST stuff...to fix the PRI/ERI... then reflash everything else... to include your carrier cab to fix anything that it could have messed up in regards to the GPS?
nitro66215 said:
Wouldn't I be able to just run that PPST stuff...to fix the PRI/ERI... then reflash everything else... to include your carrier cab to fix anything that it could have messed up in regards to the GPS?
Click to expand...
Click to collapse
The PRI settings, including GPS enable/disable, are written as NV values that my carrier cabs cannot touch. I do not know how the verizon PRI is disabling GPS, I just took someones word for it. You may be able to turn it back on in QPST, I don't know.
dcd1182 said:
The PRI settings, including GPS enable/disable, are written as NV values that my carrier cabs cannot touch. I do not know how the verizon PRI is disabling GPS, I just took someones word for it. You may be able to turn it back on in QPST, I don't know.
Click to expand...
Click to collapse
Gotcha... well... if you need a guinny pig to test on the Sprint mogul cloaned to Verizon.... ... I'd be happy to be that guinny pig. That CAB would be nice.
dcd1182 said:
i do not have permission to release that.
from what gc14 has said, it disables your GPS anyways.
Click to expand...
Click to collapse
Ahh in that case I don't need it. I will need it when I move my moguls to verizon but by the time that happens the VZW update will most likelu be out.
Hello.
I tried the update pri from the connections menu and I got "PPST : backup EFS failed."
I'm on telus...
Any ideas?
I just flashed with the latest telus update to get their updated PRI and then I flashed back to DCD.
Now, the GPS won't work at all, even though it is enabled in the dialer/location settings.
Any thoughts?
O.K. flashing my XV6800 with the official rom recently released was the first time I flashed anything. I am now serously considering reflashing to the new DCD rom to get the GPS functional. I realize I need to flash the radio as well, but other than that I'm flying blind. I have read through the wiki and think I can do this following a decent guide.
My question is, can I follow any of the guides out there, or do I need to take special steps now that I've flashed the new VZW rom? I've found a each flashing guides that I think I can follow, but would appreciate links for noob-oriented flashing guides.
You will have to take the PRI back 1.37_002 using the RadioRefresh.cab. The "official" update changed it to not allow 3rd party GPS.
http://forum.xda-developers.com/showthread.php?t=421275
Is there any confirmation that this actually works for someone who has gone from the original Verizon xv6800 firmware to the MR1 firmware, without having done any other flashing that might have written values into the radio EEPROM/flash that we don't have visibility into? [I suspect this latter point is probably the source of the confusion of various tricks working for some people and not others.]
There seems to be quite a bit of confusion as to what restores the PRI and what doesn't, and whether the PRI is actually the thing that definitively controls the enablement or disablement of the standard GPS API, or whether simply something else that happens along with the PRI update might be responsible.
creasemonkey said:
You will have to take the PRI back 1.37_002 using the RadioRefresh.cab. The "official" update changed it to not allow 3rd party GPS.
http://forum.xda-developers.com/showthread.php?t=421275
Click to expand...
Click to collapse
i dont think were 100% sure of that yet. it may work using Hard-SPL 2.47
Skywing said:
Is there any confirmation that this actually works for someone who has gone from the original Verizon xv6800 firmware to the MR1 firmware, without having done any other flashing that might have written values into the radio EEPROM/flash that we don't have visibility into? [I suspect this latter point is probably the source of the confusion of various tricks working for some people and not others.]
There seems to be quite a bit of confusion as to what restores the PRI and what doesn't, and whether the PRI is actually the thing that definitively controls the enablement or disablement of the standard GPS API, or whether simply something else that happens along with the PRI update might be responsible.
Click to expand...
Click to collapse
if you want to be a guinea pig, you can try spl 2.47 and a custom ROM. see if GPS works. im looking for the threads on this.
you can always revert to the MR1 firmware if you wish.
I've considered it, but I don't think that I want to be taking the first big step there as I don't have any extra phone aside from the xv6800, and hosing that would be a PITA.
Presently focusing on seeing if I can convince LBSDriver to return useful data with the MR1 firmware, though I'd be interested if anyone can corrobate a known working procedure for a phone that has had no custom firmwares/radios aside from the original Verizon release -> Verizon MR1 release.
To flash or not
Am I correct in assuming that if I do decide to flash, but don't like the results that I can just run the MR1 update again to get back to stock? I have read where others have said that they flash the MR1 without re-locking.
dcd1182 said:
i dont think were 100% sure of that yet. it may work using Hard-SPL 2.47
if you want to be a guinea pig, you can try spl 2.47 and a custom ROM. see if GPS works. im looking for the threads on this.
you can always revert to the MR1 firmware if you wish.
Click to expand...
Click to collapse
DCD I am running 2.47 SPL on my verizon 6800. What do you want me to be the guinea pig on? I am not great at this stuff, but willing to help if I can.
God knows you have helped me a lot with your rom's.
creasemonkey said:
You will have to take the PRI back 1.37_002 using the RadioRefresh.cab. The "official" update changed it to not allow 3rd party GPS.
http://forum.xda-developers.com/showthread.php?t=421275
Click to expand...
Click to collapse
As DCD said, going back to PRI 1.35 was not necessary for me. I still have the NEW PRI 2.03_002 on my XV6800 and I can use GPS just as I did before.... Now here's what I did....
I went from DCD 3.12 --> NEW VZW upgrade. GPS didn't work so I flashed back to "stock-non-GPS rom) Then flashed the 2.47 No2chem SPL, then flashed radio 3.42.30 using SD card, and then finally DCD 3.15. No I didn't actually check then, but I did 3 days ago, and I have PRI 2.03_002 on my phone but GPS has been working just fine..... So take that for whats it's worth, but there have been a few others who have also had success using GPS even with the new GPS on the phone....
azclown said:
As DCD said, going back to PRI 1.35 was not necessary for me. I still have the NEW PRI 2.03_002 on my XV6800 and I can use GPS just as I did before.... Now here's what I did....
I went from DCD 3.12 --> NEW VZW upgrade. GPS didn't work so I flashed back to "stock-non-GPS rom) Then flashed the 2.47 No2chem SPL, then flashed radio 3.42.30 using SD card, and then finally DCD 3.15. No I didn't actually check then, but I did 3 days ago, and I have PRI 2.03_002 on my phone but GPS has been working just fine..... So take that for whats it's worth, but there have been a few others who have also had success using GPS even with the new GPS on the phone....
Click to expand...
Click to collapse
but your aGPS is still locked to VZNav i assume. any real benefit that you see of being on the new PRI?
WOW - GPS on the VZW 6800 that works!!!
This took about 2 hours to get done but right now it seems to be worth every minute.
I've tried all of the fixes, some kinda silly - felt like I was being told to sling a cat over my head in the front yard.
BUT THIS ONE GETS LOCKS AS FAST AS MY SPRINT TOUCH!!!!!
I am using 3.2.6 and the 3.42.4 radio after following the above (I have kept the new PRI).
I thought I was getting something wrong. Then I tried the GPS 5 miles apart, rebooted, tried again - same results 5 or 6 sat lock in less than 30 seconds.
I'll continue to monitor in the next couple of days and report any change. But darn - WOW!!
Finally flashed
Well I finally flashed to the DCD rom and radio today. I flashed radio 3.42.50 and DCD 3.2.6. I finally decided to flash for the GPS, but I guess that isn't gonna happen since I had previously flash the VZW MR1 update to a stock phone. I went through the titan gps fix and everything went as the wiki said it should. But I have no working gps. I assume this is because of the 2.03_002 PRI without ever having flashed before.
I've read quite a few gps threads and I think all my settings are ok, but I can't seem to get it working. Any ideas?
BENLANE, just to I understand... you upgraded to the new official VZW ROM, and then changed to DCD 3.2.6 and radio 3.40? What bootloader are you using?
Are you sure this was not a placebo?
As sure as I can be
blancmik said:
BENLANE, just to I understand... you upgraded to the new official VZW ROM, and then changed to DCD 3.2.6 and radio 3.40? What bootloader are you using?
Are you sure this was not a placebo?
Click to expand...
Click to collapse
-----
I don't know how else to test but I've tried to make it fail - soft resets, moved around 5 miles etc. I tried it again a few minutes ago - almost instant using Live Search.
I follow all of the directions included in the post #8. Then I used DCDs 3.2.6 and the 3.42.4 radio.
Regedit
Before I follow the instruction in post #8 and re-flash, are there any registy entries that I should check that could be disabling my gps right now?
Don't think registry edits do it
animez said:
Before I follow the instruction in post #8 and re-flash, are there any registy entries that I should check that could be disabling my gps right now?
Click to expand...
Click to collapse
Like I said above, I've done virtually everything short of slinging a cat above my head in the front yard. I've tried 'em all. The registry edits, the 3 additional files, use of the GPS toggle, etc etc. It always lead me to believe that whatever was needed was on Verizon's end. With the PRIs, I believe we have it.
Based on past experiences, this may not work tomorrow but for today - COOL RUNNINGS.
So simple answer, I don't think a registry edit will get it. I believe it is a combination of the PRIs, the unlocker, the radio and most of all the terrific ROM from DCD. He's the real deal.
benlane said:
So simple answer, I don't think a registry edit will get it. I believe it is a combination of the PRIs, the unlocker, the radio and most of all the terrific ROM from DCD. He's the real deal.
Click to expand...
Click to collapse
I loaded the spl 2.47 and flashed the 3.42.40 radio, can I just reflash the dcd 3.2.6 (which I'm currenly using) or should I flash a differnet OS version?
Sorry for all the noob questions, I just really want the GPS working, and I'm lazy to boot.
I'm really starting to wonder if I'm gonna be able to get it working. I think my situation is different than most on this forum. I went from stock to the MR1 update, to the DCD rom and radio. I don't think I've read any posts where anyone took that path and got GPS working.
animez said:
...
I'm really starting to wonder if I'm gonna be able to get it working. I think my situation is different than most on this forum. I went from stock to the MR1 update, to the DCD rom and radio. I don't think I've read any posts where anyone took that path and got GPS working.
Click to expand...
Click to collapse
I havent read all the posts in this thread but it sounds like you locked out GPS functionality when going from the MR1 update to a custom rom. When you upgraded with the MR1 update, you installed a new version of the PRI. It appears that this version locks out GPS functionality, even with a custom rom.
You might want to check out gc's thread from hell for more info on this and how to go about getting back the old PRI. Its time consuming but works. There are supposedly other methods but not many have had success with them.
You've misunderstood
animez said:
I loaded the spl 2.47 and flashed the 3.42.40 radio, can I just reflash the dcd 3.2.6 (which I'm currenly using) or should I flash a differnet OS version?
Sorry for all the noob questions, I just really want the GPS working, and I'm lazy to boot.
I'm really starting to wonder if I'm gonna be able to get it working. I think my situation is different than most on this forum. I went from stock to the MR1 update, to the DCD rom and radio. I don't think I've read any posts where anyone took that path and got GPS working.
Click to expand...
Click to collapse
I did all of the above intentional to have the new pri on my phone.
Update on locks - still getting them fast, but they have slowed to an occasional lock in about 2.5 minutes.
GPS is working
Well my GPS works great now, all thanks to this thread.
Bad link animez...
Okay, I've looked around the forums and tried a number of things. I started out wondering if I should install the new update. Got to looking around and decided to just install a custom rom. Was a little weary because of my experience with the xv6700. Anyway. Ran SPL Unlocker to install 2.40 Oilpro. Installed the Radio 3.27.00 and dcd 2.1.0....did a *228 and then my phone would not pick up service. Tried a few things but since I was in a hurry just ran the vzw update and it fixed it. Later I come back and decided to try an do this right. So I run the RadioRefurbish. It worked and rolled me back to 1.35_002. Still no GPS. I've tried everything including this:
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
Still no change. I do not get a fix. I mean GPS Viewer can see the GPS but I never get anything from it. I have a bluetooth GPS and can get a fix inside on a cold start in 5 min max. I left this thing for hours. Indoor, in the car, etc... nothing. I'm at a loss. I am currently running SPL 2.40 Oilpro. Radio 3.42.02 and dcd 3.2.3. With PRI 1.35_002. I had read of success with the new vzw PRI and NueSpl 2.47. Tried to install 2.47. Gives me checks on all of the prequisites and then when I continue it goes into the bootloader and displays spl 2.07 I have to then soft reset and if I go back to the bootloader it's still 2.40. I am at a loss and would really like to get this working. Any suggestion from any of you oober smart people out there would be great or just someone that might know what else to try.
P.S. Thought about trying to flash back to the original rom but had read where that can easily brick my phone. So that's about the only thing I haven't tried.
oober? lol...
First, what guide were you using that had you using such an outdated bootloader, radio, and rom?!
Secondly, am I to understand that you ran the new MR1, WinMo 6.1 from Verizon, with the new PRI? If so, I would try GC14's fix, he has a thread on it, to roll you back to the old PRI.
Thirdly, definetly use NueSPL 2.47 for flashing. Grab the newest radio, 3.42.50. Flash that. Grab the newest dcd, 3.2.6, flash that. Then install the Verizon Carrier Cab. Then do a *228 option 1. Call verizon *611 if need be, to re authenticate the phone if you can't make calls or use data.
Fourthly, go into the Phone control panel, and Get Settings on the Location option. Make sure location is enabled.
Fifth, do the new aGPS fix that was posted by gc14.
Lastly, get a program like Google Maps that is known to be highly compatible with GPS. Set it's GPS options to COM4, 4800 baud. And enable Use GPS. After initializing GPS for about 15 seconds, you should see a very fast lock of about 5-20 seconds or so with the new aGPS fix.
jjsparks3589 said:
...Installed the Radio 3.27.00 and dcd 2.1.0.......
Click to expand...
Click to collapse
Is that even a GPS enabled rom?
Why are you using such an old rom?
PRI rollback really required?
Is the PRI roll back really required? I went from the MR1 update to DCD 3.2.6 and radio 3.42.40 and got GPS working without rolling back the PRI. My process was;
1. Titan GPS Fix (almost the same as AGPS fix wiki)
2. PRI from hell (only did first step, flashing back to stock)
3. Fix from PPCGeeks (My GPS did not work at all till I did this)
4. Verizon xv6800 aGPS Fix
As far as the PPCGeeks fix goes, I'm now using the PDE IP & port# in the SUPL_AGPS keys in the registry, long with GPSMODE=4. Everything seems to be working great. Maybe I'm just a fluke.
The stock rom I flashed back to when I started the PRI from hell fix was VzW_titan_20273_a2.rar (I think this is the right one, only one I found on my laptop that seems big enough). Now that I think about it I did do the second step on the PRI from hell, I changed my bootloader to 2.40, and reloaded DCD 3.2.6.
i believe that guide would be from PhoneNews as its still one of the top results for "GPS on HTC Titan." Of course no one reads that there is an updated guide, but even that isn't that recent (around release time of 3.35). plus, they give ZERO credit to DCD or anyone on any forums, and took if upon themselves to host all the downloads, and not link to the forums where these originated.
3.42.50 has issues with gps on some phone for some reason. flash with the sprint radio and it will work with out issue.
aguas said:
i believe that guide would be from PhoneNews as its still one of the top results for "GPS on HTC Titan." Of course no one reads that there is an updated guide, but even that isn't that recent (around release time of 3.35). plus, they give ZERO credit to DCD or anyone on any forums, and took if upon themselves to host all the downloads, and not link to the forums where these originated.
Click to expand...
Click to collapse
Well, not saying it's a better fix, just the one that got mine working. But thanks to the xda-dev forums it went from a searchlight to a laser beam.
I've got a solution for GPS on the MR1 release for the xv6800. I should hopefully have a full release soon, but there is hope if you're stuck and unable to get anything except (possibly) VZ Navigator working due to the firmware being placed into locked down GPS mode.
Protonus said:
oober? lol...
First, what guide were you using that had you using such an outdated bootloader, radio, and rom?!
Secondly, am I to understand that you ran the new MR1, WinMo 6.1 from Verizon, with the new PRI? If so, I would try GC14's fix, he has a thread on it, to roll you back to the old PRI.
Thirdly, definetly use NueSPL 2.47 for flashing. Grab the newest radio, 3.42.50. Flash that. Grab the newest dcd, 3.2.6, flash that. Then install the Verizon Carrier Cab. Then do a *228 option 1. Call verizon *611 if need be, to re authenticate the phone if you can't make calls or use data.
Fourthly, go into the Phone control panel, and Get Settings on the Location option. Make sure location is enabled.
Fifth, do the new aGPS fix that was posted by gc14.
Lastly, get a program like Google Maps that is known to be highly compatible with GPS. Set it's GPS options to COM4, 4800 baud. And enable Use GPS. After initializing GPS for about 15 seconds, you should see a very fast lock of about 5-20 seconds or so with the new aGPS fix.
Click to expand...
Click to collapse
I was able to roll back to PRI 1.35_002 using Radiorefurbish. I would love to install nuespl 2.47, but how. I downloaded it, ran it. It formated my card and ran. Reboots into the bootloader with a spl of 2.07 and just stays there. When I soft reset, reboots as normal. If I enter the Bootloader after that it's still 2.40. I've tried it from a few different Roms thinking that maybe there was an issue. BTW, How bad (dangerous) is it to flash back to original stock. It's about the only thing I haven't tried. I had read that going back to a non GPS rom is a bad idea.
jjsparks3589 said:
I was able to roll back to PRI 1.35_002 using Radiorefurbish. I would love to install nuespl 2.47, but how. I downloaded it, ran it. It formated my card and ran. Reboots into the bootloader with a spl of 2.07 and just stays there. When I soft reset, reboots as normal. If I enter the Bootloader after that it's still 2.40. I've tried it from a few different Roms thinking that maybe there was an issue. BTW, How bad (dangerous) is it to flash back to original stock. It's about the only thing I haven't tried. I had read that going back to a non GPS rom is a bad idea.
Click to expand...
Click to collapse
The reason you are stuck in 2.07 could be because of your sd card. try a different card. SanDisk works really well with them.
jjsparks3589 said:
I was able to roll back to PRI 1.35_002 using Radiorefurbish. I would love to install nuespl 2.47, but how. I downloaded it, ran it. It formated my card and ran. Reboots into the bootloader with a spl of 2.07 and just stays there. When I soft reset, reboots as normal. If I enter the Bootloader after that it's still 2.40. I've tried it from a few different Roms thinking that maybe there was an issue. BTW, How bad (dangerous) is it to flash back to original stock. It's about the only thing I haven't tried. I had read that going back to a non GPS rom is a bad idea.
Click to expand...
Click to collapse
I had the same problem trying to use nuespl 2.47. I just kept getting stuck at that screen. soft resetting and trying again. I gave up for a few hours... and came back to it and with absolutely no rhyme or reason, it just decided to work one time... I was also using the SD card method with a 2gig micro. I hope it just decides to work for you.
animez said:
Is the PRI roll back really required? I went from the MR1 update to DCD 3.2.6 and radio 3.42.40 and got GPS working without rolling back the PRI. My process was;
1. Titan GPS Fix (almost the same as AGPS fix wiki)
2. PRI from hell (only did first step, flashing back to stock)
3. Fix from PPCGeeks (My GPS did not work at all till I did this)
4. Verizon xv6800 aGPS Fix
As far as the PPCGeeks fix goes, I'm now using the PDE IP & port# in the SUPL_AGPS keys in the registry, long with GPSMODE=4. Everything seems to be working great. Maybe I'm just a fluke.
The stock rom I flashed back to when I started the PRI from hell fix was VzW_titan_20273_a2.rar (I think this is the right one, only one I found on my laptop that seems big enough). Now that I think about it I did do the second step on the PRI from hell, I changed my bootloader to 2.40, and reloaded DCD 3.2.6.
Click to expand...
Click to collapse
Do you need to use a relocker before flashing the stock rom? Edit: NVM this
Also, can you share VzW_titan_20273_a2.rar somehow? Any search for it only brings me back to this thread :\... Thanks
Just use the gc14 guide to roll back to the old PRI as stated and be done with it...
3.42.50 radio works fine with GPS, doubly fine with the aGPS hack.
deboy_001 said:
Do you need to use a relocker before flashing the stock rom? Edit: NVM this
Also, can you share VzW_titan_20273_a2.rar somehow? Any search for it only brings me back to this thread :\... Thanks
Click to expand...
Click to collapse
I should have room to upload it on my comcast account. I'll PM you a link when it's done. Standard warning that flashing back to stock has bricked phones (from what I've read). Didn't happen to me, just saying.
Flashing back to MR1 should work. From what I have been told, the problem occurs if you flash to a pre-GPS version after having upgraded to a GPS-enabled version.
Skywing said:
Flashing back to MR1 should work. From what I have been told, the problem occurs if you flash to a pre-GPS version after having upgraded to a GPS-enabled version.
Click to expand...
Click to collapse
ah yes... MR1 would be no problem, but I believe pri from hell fix first step is referring to the pre-MR1 stock (if I'm not mistaken). so I see where animez is coming with the warning. At that step, all you can do is hope for the best I suppose...
Ive flashed back to the ut of the box" stock rom form the SD card several times with no issues at all.
now as far the radio i don go below 3.xx
I still cant get my GPS to work after i updated my PRI, even before i updated it was very hit or miss, I would get 10 sec locks or none at all for days
Has anyone here SUCCESSFULLY downgraded the PRL on their XV6800 when using NueSPL 2.47 ?
I remember in the past people, including no2chem himself saying that downgrading SPL is a huge risk and may brick your device, so I thought I'd ask around.
I've been unable to remove the PRI from my device after doing the MR1 update.
Using tools like HTC GPS Tool, I see output from the GPS, but it never sees any satellite.
I did the Verizon AGPS fix that GC14 posted and I had some thoughts on the issue.
I was wondering if it is making it worse to have done the AGPS fix because of not having a data plan (I use Wi-Fi only).
Current Setup:
OS ROM: DCD 3.2.6 (Kitchen'd)
RADIO: 3.42.40
PRL: 2.03_002
SPL: NueSPL 2.47
Any ideas, input, comments, suggestions, etc?
scrawnyb said:
Has anyone here SUCCESSFULLY downgraded the PRL on their XV6800 when using NueSPL 2.47 ?
I remember in the past people, including no2chem himself saying that downgrading SPL is a huge risk and may brick your device, so I thought I'd ask around.
I've been unable to remove the PRI from my device after doing the MR1 update.
Using tools like HTC GPS Tool, I see output from the GPS, but it never sees any satellite.
I did the Verizon AGPS fix that GC14 posted and I had some thoughts on the issue.
I was wondering if it is making it worse to have done the AGPS fix because of not having a data plan (I use Wi-Fi only).
Current Setup:
OS ROM: DCD 3.2.6 (Kitchen'd)
RADIO: 3.42.40
PRL: 2.03_002
SPL: NueSPL 2.47
Any ideas, input, comments, suggestions, etc?
Click to expand...
Click to collapse
Downgrading SPL? You can do that without any problem. PRL? That's a different story. But yes. You can do that as well. The setup you have, I have successfully got GPS working. Have you followed the thread on this?
nitro66215 said:
Downgrading SPL? You can do that without any problem. PRL? That's a different story. But yes. You can do that as well. The setup you have, I have successfully got GPS working. Have you followed the thread on this?
Click to expand...
Click to collapse
I've been following a few threads in here on the issue.
Which one(s) are you specifically talking about?
None of them have truly helped me yet. I can't get GPS locks using the official verizon radio (3.37.71 or whatever) nor 3.42.40 with the new PRI, but I had it working with the same setup on the OLD PRI using Olipro 2.40.
If you have already updated to MR1 and locked down the GPS hardware on your device, you could try this out instead of trying to unlock the GPS hardware:
http://forum.xda-developers.com/showthread.php?t=424387
Currently, this needs you to be on MR1 to work. Including the MR1 GPS driver may allow it to work on a custom ROM if you want to try building your own, though that has yet to be tested.
Skywing said:
If you have already updated to MR1 and locked down the GPS hardware on your device, you could try this out instead of trying to unlock the GPS hardware:
http://forum.xda-developers.com/showthread.php?t=424387
Currently, this needs you to be on MR1 to work. Including the MR1 GPS driver may allow it to work on a custom ROM if you want to try building your own, though that has yet to be tested.
Click to expand...
Click to collapse
still not what I'm looking for.
I'm going to try unlocking my device and flashing the stock ROM, letting customizations run, then unlocking + then flashing the new VZW update and not running customizations, then going to DCD 3.2.6 again
sorry for the double-post, but I decided to do what I said in the last post.
I downgraded my SPL just fine using the Titan Relocker (not the one that puts you at 2.07 SPL, the one that puts you at 1.xx) then flashed on Stock VZW, then Olipro 2.40, then my kitchened DCD 3.2.6 ROM.
No bricked device.
I did notice my phone went into ROAMING when I flashed on the Stock ROM, but I didn't bother trying to call out, I was a man on a mission, and just kept going.
I did *228 option #1 when I got into 3.2.6 again, didn't need a new A-Key or anything.
GPS is STILL not working, as the PRI version stuck somehow.
*sigh* Problem not resolved... and I wasn't having any luck with doing the RadioRefurbish method either.
Any ideas?