For those wanting to upgrade only their radio I have uploaded the following RUU packages:
Radio 1.02.25.31 (Cingular)
Radio 1.02.25.19 (HTC)
Radio 1.02.25.11 (HTC)
Radio 1.01.25.16 (Cingular)
Each of the packages already contains an ROM updater which does not erase your phone, so your operating system and settings will remain intact.
Note: You need to have HardSPL before attempting to flash these!
Remember that flashing anything on your phone is always at your own risk.
I have updated my HTC Touch Pro to from Radio 1.02.25.19 to Radio 1.02.25.31 without any problems.
Update 1: Added Cingular Radio 1.01.25.16
THANK YOU now i try in my diamond
Do these radios work also on Diamond ?
They will not flash in your Diamond if your Diamond radio is security locked.
I would advise against flashing Raphael radio's in your Diamond, there is no reason to.
It could work because the chipset is the same, but why take the chance to brick your phone by flashing a radio which is not meant for it.
Do you see any improvement with .31 radio?
Tested it for about an hour or so now.
Can't say I noticed any difference, but I only tested it around the house. Reception around here is generally very bad and it seems to hold up nicely, so its definitely not worse then the previous radio.
GPRS, EDGE and HSPDA seem to work fine.
What about the Cingular one..? Anyone try this in the US to see if the 3g is now present..?
i flashed my touch pro with .31 and it went perfectly. In fact my US AT&T shows G. Not sure if that is the same as 3G but i am also at work where i have bad reception so that may play into it
as with the roms thread, the info is in the wiki pages already.
Although do keep discussion on the radio performance open
3g radio work in North America?
I bought the Diamond in the UK and haven't gotten anything but EDGE. Will any of the RADIO updates address this or is it a hardware problem ?
mallman said:
i flashed my touch pro with .31 and it went perfectly. In fact my US AT&T shows G. Not sure if that is the same as 3G but i am also at work where i have bad reception so that may play into it
Click to expand...
Click to collapse
I believe it should be showing and H icon..
darkvoid said:
Tested it for about an hour or so now.
Can't say I noticed any difference, but I only tested it around the house. Reception around here is generally very bad and it seems to hold up nicely, so its definitely not worse then the previous radio.
GPRS, EDGE and HSPDA seem to work fine.
Click to expand...
Click to collapse
Are you in the USA??? on ATT???
gatordent said:
Are you in the USA??? on ATT???
Click to expand...
Click to collapse
That's something I would like to know as well...
gatordent said:
Are you in the USA??? on ATT???
Click to expand...
Click to collapse
Nope, I'm in Europe (The Netherlands).
BoldFace said:
I believe it should be showing and H icon..
Click to expand...
Click to collapse
not in USA i dont think. my last 3g phone only showed 3g
i've tried to flash radio and it went 100% in 5 seconds. phone started but no radi was updated. any thoughts?
H is in fact in US...
mallman said:
not in USA i dont think. my last 3g phone only showed 3g
Click to expand...
Click to collapse
My TyTN II would show 3G most of the time in the Chicago area. It would switch to H whenever it was downloading. That's the ONLY THING I miss having now that I got the TP...Edge is too terribly slow to do anything but update the weather and my RSS feeds off hours (like at 3AM).
T
E
C
Can canadians use these 3g radio updates? I have a UK phone and i'm only getting EDGE right now
So what was decided about Diamond radios? I know the discussion was started but was there a conclusion? I like the radio on my diamond much better than .19 on the Pro.
TIA
Hey mixmaven, go read the other raphael radio thread, this was answered already!
http://forum.xda-developers.com/showpost.php?p=2568960&postcount=28
http://forum.xda-developers.com/showpost.php?p=2568960&postcount=35
-me
mixmaven said:
So what was decided about Diamond radios? I know the discussion was started but was there a conclusion? I like the radio on my diamond much better than .19 on the Pro.
TIA
Click to expand...
Click to collapse
Related
New radio 1.50.00.00 for Hermes available here:
Hermes_Radio_1.50.00.00_108.zip
Information about this radio version:
Radio version: 1.50.00.00
KMRX: 3.2.7020
HTC_BOOT: 0108
QC_BOOT: 0035
DATE1: 31/Oct/2006
DATE2: 17/Aug/2006
JNAND: 07.00.13 02/Nov/2006
Enjoy
thanks,upgrade now
Any complaints so far?
Thanks !! downloading now ..
Any news about it? 148 works great but always want to try something new
I am getting 3G signal almost all the time as before it was better then 141...148....will test all day tommorrow in differant spots where I usualy loose signals.
Thank you. Seems OK so far... How come this is only a GSM upgrade?
*EDIT* I don't notice any difference in reception between 1.50, 1.48, and 1.40.30... I'll have to see about battery differences.
Thanks pof
Flashed it and will see how it goes.
thanks pof,just flashing it.
oldominion said:
Thank you. Seems OK so far... How come this is only a GSM upgrade?
Click to expand...
Click to collapse
I believe it means that it is just radio? At least I got UMTS reception as well.
Testing it now, hope it's better than the 1.48 which caused me to lose several calls.
Repository
Please, can someone upload this to some rapidshare - there are many problems with FTP download on proxy in work. Thanks a lot!
waiting feedbacks......
Thanks POF. Flashing it now (85%).
Let you all know how it's working.
Remember all, please post your location and comments on radio 1.50.00.00 to help other outs on the locations.
Thanks.
thanks
S64
Can't receive calls,
China mainland.
Here in the Netherlands this version is working perfect. Get nice HSDPA connection. Wifi is working with WPA security.
All calls come in, only not when HSDPA connection is active. Had this problem also with previous versions 1.47 and earlier.
Hope it's also working fine for you too....
Anyone in Toronto try this yet? Have been having problems with radio's after 1.43 and missed calls with Rogers. Hopefully 1.50 resolves this issue.
I will not be able to test this myself until late today and will post results once done.
Quick question: Anyone know the origin of this release? Did it come from a specific carrier, as most do?
Thanks.
Bensat said:
Here in the Netherlands this version is working perfect. Get nice HSDPA connection. Wifi is working with WPA security.
All calls come in, only not when HSDPA connection is active. Had this problem also with previous versions 1.47 and earlier.
Click to expand...
Click to collapse
Same thing here in Italy with TIM phone company.
I think that the HDSPA problem is not a radio software fault, if i try to call my Tytn while i am on an HDSPA session, the tone from the phone company is not "free" or "busy", it is the one they use when a number is wrong or the line is absent or broken.
I will check the battery usage too.
Cheers
M
massimo729 said:
Same thing here in Italy with TIM phone company.
I think that the HDSPA problem is not a radio software fault, if i try to call my Tytn while i am on an HDSPA session, the tone from the phone company is not "free" or "busy", it is the one they use when a number is wrong or the line is absent or broken.
I will check the battery usage too.
Cheers
M
Click to expand...
Click to collapse
Silly question, If it is a GSM only upgrade, it wouldnt effect HDSPA?
Hi every one,
i've got my hermes radio to 1.54.30.10 month ago. and i've just seen a Seniour member started a thread warning that the 1.54 series are unstable....
i haven't met any problems till now.. i wanna know if it's possible for me to downgrade my radio to 1.47 or 1.38?
I'm no expert, but I went from 1.54.30.10 to the official 1.54.07.00. Never tried going lower.
I just downgraded to 1.43 due to problems with 1.54.30.10 - start loosing signal recently
check this
Hi
may be this link will help u .... Just to have an idea
u can read it from here:
http://forum.xda-developers.com/showthread.php?t=265975
good luck paw
ss1271 said:
Hi every one,
i've got my hermes radio to 1.54.30.10 month ago. and i've just seen a Seniour member started a thread warning that the 1.54 series are unstable....
i haven't met any problems till now.. i wanna know if it's possible for me to downgrade my radio to 1.47 or 1.38?
Click to expand...
Click to collapse
Yes, u can down grade to a lower radio version, it's done quite often (assuming u have hardspl).
Thanks a lot~
I'll downgrade my Radio as soon as I finished this semester~
By the way...
Are there any serious problem( known as bricked your Hermes) if i continue to using this 1.54.30.10 Radio?
i mean if it necessary for me to downgrade my Radio?
No hard evidence, but 1.5+ radios are suspected for causing problems - read details HERE and HERE
I start experiencing problems similar to described in the above threads, so just downgareded to 1.43
Cheers
not having any major issues with this radio ROM, been on the radio for more or less 3 weeks (touch wood! ) .. am on Celcom Malaysia 3G (UMTS 2100)
Similar problems here. Downgraded, but it may be too late,had numerous connection problems and slow 3G on tmobile.
Forget radio 1.54.xxxxx
From my experience - flashing radio 1.54 can brick your phone , lost CID and sspl .
ss1271 said:
Thanks a lot~
I'll downgrade my Radio as soon as I finished this semester~
Click to expand...
Click to collapse
Bad plan get rid of it now.
Use this one: ftp://xda:[email protected]/HERM_Radio_Only_1.48.00.10_CustomRUU.rar
it's not worth the risk of waiting.... you've been lucky so far. Current thought is that the 1.5x series ROMs drive the radio chip too hard and it overheats to extinction. First signs are drops and erratic radio performance. If you wait until you already got it you prob waited too long. But if you do get those symptoms before you reflash, then pull the battery immediately and (OK this might sound weird but it worked for a friend of mine) put the phone & the battery in a zip lock baggy and put it in the freezer while you get that radio rom I pointed at above ready.
When ready, put it back together and immediately flash the Radio with the 1.48 version. After it resets and does it's business.... reflash the 1.48 again.
Hopefully you will never see the problem again, if that didn't work then you may as well try calling your provider to see if they will replace the phone.
I've downgraded my radio to 1.48 about 1 month ago..
i'll show my grateful to u, thanks a lot!
radio 1.54.30.10 is working perfect on Orange Israel ,Kiyevstar Ukrain, MTC Moscow , and other Europe countries that i visited , this radio is the best i tried
regards
edward
kipe said:
not having any major issues with this radio ROM, been on the radio for more or less 3 weeks (touch wood! ) .. am on Celcom Malaysia 3G (UMTS 2100)
Click to expand...
Click to collapse
So far so good .. nothing bad happen yet .. notice that my CELCOM 3G signal getting better ...
Same here, I have a better signal and connects to 3G faster than AT&T's radio 1.54.07.00, and I am on the AT&T Network
just to add to the the list of "satisfied customers" ..no problem whatsoever with my provider (UMTS 2100/GSM 900+1800)..
best downgrade and how to obtain it
I'm also experiencing similar problems. I have been running 1.54.07.00 for about 3 months and steadily experiencing more drop-outs on the phone service. I've ready different treads and some people have downgraded to 1.48 and other to 1.43. Is either one a better choice? And, sorry to ask a basic question, but where to I download the downgrade. I searched, but to no avail.
Hermes 100
Rom Version 3.62.502.3
Rom date 10/11/2007 (Oct 11)
Radio version: 154.07.00
I've been using this Radio on my Vario II since it showed up here (2 months maybe) and nothing happened. Signal strength is still the same. For me personally it's the best Radio I've been using so far. I'd be a pity having to downgrade now...
rnando said:
I'm also experiencing similar problems. I have been running 1.54.07.00 for about 3 months and steadily experiencing more drop-outs on the phone service. I've ready different treads and some people have downgraded to 1.48 and other to 1.43. Is either one a better choice? And, sorry to ask a basic question, but where to I download the downgrade. I searched, but to no avail.
Hermes 100
Rom Version 3.62.502.3
Rom date 10/11/2007 (Oct 11)
Radio version: 154.07.00
Click to expand...
Click to collapse
hermes wiki
I've had the 'false roaming' icon on for a few weeks now in addition to a 'no signal' scare for a few hours. I'm thinking of just downgrading to the 1.43 radio that originally shipped with the WM5 AT&T ROM.
What appears to be the vogue 2.13.00 radio packaged for titan has showed up on the xda ftp and seems to be working for titan users. I created this thread to move conversation here.
ftp://xda:[email protected]/Titan/Radio_Roms/titan_2.13_CDMA.rar
Mods, some conversation begins at post #284 on my kitchen thread if you want to move here.
It also would appear they posted a 1.59 and another 1.47 radio rar file. As to my knowledge the 1.47 was the lastest radio put out by HTC for the Titan.
How about a direct link to the new radio?
JimSmith94 said:
How about a direct link to the new radio?
Click to expand...
Click to collapse
Although some say it working on their Titan, we don't know if this is an actual update for the Titan. I would be very careful and wait to get more information before using this radio.
Using it on my Titan and loving it havent noticed any problems as of yet but will post anything I find.
dalvarez7 said:
It also would appear they posted a 1.59 and another 1.47 radio rar file. As to my knowledge the 1.47 was the lastest radio put out by HTC for the Titan.
Click to expand...
Click to collapse
1.32.00 was released in sprint titan ship rom 2.09
1.40.00 was released in alltel titan ship rom 2.14
1.47.00 was released in sprint titan ship rom 2.16
1.47.01 was released in sprint titan ship rom 2.17
1.59.10 was released in bell vogue ship rom 1.17
2.13.00 was released in sprint vogue ship rom 1.12
Dam dcd u are just a plethora of information.
dcd1182 said:
1.32.00 was released in sprint titan ship rom 2.09
1.40.00 was released in alltel titan ship rom 2.14
1.47.00 was released in sprint titan ship rom 2.16
1.47.01 was released in sprint titan ship rom 2.17
1.59.10 was released in bell vogue ship rom 1.17
2.13.00 was released in sprint vogue ship rom 1.12
Click to expand...
Click to collapse
So it basically sounds like the Sprint Vogue 2.13 radio happens to work (as far as we can tell) on the Titan.
NexVision...you mentioned it seemed to be faster? How about the signal strength?
dalvarez7 said:
So it basically sounds like the Sprint Vogue 2.13 radio happens to work (as far as we can tell) on the Titan.
NexVision...you mentioned it seemed to be faster? How about the signal strength?
Click to expand...
Click to collapse
Well based on the signal bars on the phone I have gone from 1 to 2 bars in my store to a full signal. Does that mean better signal well I have never been one to go by the bars. Will know more tonight when I go to my girls as my phone loses service the second I walk into her house almost convinced she has a jammer to keep me from being pulled away.
Will know more tonight when I go to my girls as my phone loses service the second I walk into her house almost convinced she has a jammer to keep me from being pulled away.
Click to expand...
Click to collapse
hahhahaha that would be hilarious...
is this sprint only? or wil it work for verizon too?
Maybe its just me being niave, but I'm not at all surprised by this, the Mogul and the Touch are basically the same hardware as far as the radio is concerned:
http://pdadb.net/index.php?m=pdacomparer&id1=803&id2=771
Vinny75 said:
Maybe its just me being niave, but I'm not at all surprised by this, the Mogul and the Touch are basically the same hardware as far as the radio is concerned:
http://pdadb.net/index.php?m=pdacomparer&id1=803&id2=771
Click to expand...
Click to collapse
If thats the case I wonder if they just called the latest Radio for the Vogue 2.13 which is really the same as the Titan 1.47? You would think that if they were so similar HTC would use the same radio.
Though.. with the Touch not having Wifi, would be interested to know if WiFi still works on the Mogul with this Radio version...
Then if it disables Wifi on the Mogul... can you use a mogul radio on a touch to get Wifi.... hurmm....
Vinny75 said:
Though.. with the Touch not having Wifi, would be interested to know if WiFi still works on the Mogul with this Radio version...
Click to expand...
Click to collapse
hmm, thought-provoking
Then if it disables Wifi on the Mogul... can you use a mogul radio on a touch to get Wifi.... hurmm....
Click to expand...
Click to collapse
if the Touch doesn't have the hardware to do Wi-Fi (as in the radio doesn't support 802.11), then no software can make it happen
sudermatt said:
is this sprint only? or wil it work for verizon too?
Click to expand...
Click to collapse
I too am interested to know this, thanks.
just tried it, BUT after the "upgrade" my phone only connects to the Internet at 1X. anyone else having this or similar problems??
I just flashed this to my verizon xv6800. So far I can send and recieve calls and WIFI works. So it looks good for verizon at the moment. I'll pair it with my car (2008 honda accord) and see what the bluetooth performance is like. Cross your fingers for me.
My report (loaded on XV6800):
Phone- Sound is excellent. Fixes problem of not being able to answer phone after 1.40 radio install.
Bluetooth- works fine.
Wifi- works fine, although the hard button on the side of the device no longer works. Connect/disconnect through comm manager is fine. May try another hard reset to see if this is fixable. A small sacrifice vs. the increase in EVDO speed.
Evdo speed 868kbps. This is a 33% increase over prior. Getting an extra bar in most locations.
I'm sold.
ebb said:
Wifi- works fine, although the hard button on the side of the device no longer works.
Click to expand...
Click to collapse
weird, you guys have a button?
went 2.13.00 and my ppc-6800 wifi still working fine using the switch.
I know dcd a ripped a more recent radio from the Bell release... but I'm wondering... would this radio provide any benefit to Verizon users seeing as it came from a Verizon ROM? Would even work without the new PRI?
EDIT:
3.37.75 Radio: http://lifesnotsogood.com/dcd1182/titan/radios/Titan Radio ROM 3.37.75.rar THANKS DCD!
MIRROR: http://dcd1182.n715dp.com/index.php?dir=titan/radios/&download=Titan+Radio+ROM+3.37.75.rar
Zenoran said:
I know dcd a ripped a more recent radio from the Bell release... but I'm wondering... would this radio provide any benefit to Verizon users seeing as it came from a Verizon ROM? Would even work without the new PRI?
Click to expand...
Click to collapse
There is absolutely nothing in a radio ROM that ties it to a carrier or optimizes it for a carrier in any way over any other radio ROM.
I will post 3.37.75 here anyways.
dcd1182 said:
There is absolutely nothing in a radio ROM that ties it to a carrier or optimizes it for a carrier in any way over any other radio ROM.
Click to expand...
Click to collapse
so is there a benefit to installing the latest and greatest radio?
thanks for all the hard work DCD
dcd1182 said:
There is absolutely nothing in a radio ROM that ties it to a carrier or optimizes it for a carrier in any way over any other radio ROM.
I will post 3.37.75 here anyways.
Click to expand...
Click to collapse
ya... i realize there is nothing specific to the carrier but it would stand to reason that the carrier did their testing based on that specific release so it could possibly have the best results on their carrier?
I dunno.. I'm just wondering ... will try the radio you posted tho appreciate it!
I have noticed very little if any difference in signal strength between alltels stock radio and the newest i put on. Going to the new one however did enhance the ability of my gps with alltel stock radio i wasn't able to get anything in my office now i works pretty well.
So is this Radio ROM decoupled from the VZW ROM update so I can flash it and still keep the DCD 3.2.6 ROM that I already have?
I am on 3.42.50 but am willing to try this Radio ROM to see if there is any difference for VZW users but don't want to screw my phone up with VZW crap that turns off my GPS and Data and all that.
Yea, I am asking the same question: I know what dcd said earlier in this thread but I think it need reiterating: Is installing this radio going to screw up anything for those of us using dcd's ROM?
Also, I'm using 3.42.50; and this is 3.37.75... Isn't this a step backward (as far as version numbers go)? So what would be the difference?
P.S. The 3.42.50 radio rom, who/where was that originally pulled from?
Chimp (Tom)
SimpTheChimp said:
Yea, I am asking the same question: I know what dcd said earlier in this thread but I think it need reiterating: Is installing this radio going to screw up anything for those of us using dcd's ROM?
Also, I'm using 3.42.50; and this is 3.37.75... Isn't this a step backward (as far as version numbers go)? So what would be the difference?
P.S. The 3.42.50 radio rom, who/where was that originally pulled from?
Chimp (Tom)
Click to expand...
Click to collapse
i believe it was ripped from altel, but i read that radios are NOT carrier specfic
Just installing the 3.37.75 radio without the PRI won't screw anything up.
The 3.42.50 radio came from the Bell Vogue Rom.
Radios are not carrier specific.
Ok here is my question. Who controls the version numbers? Do all the radio ROMs come from HTC or do the carriers themselves edit them (not to be carrier specific, just in general..) then publish them?
I guess I just want to know if they all follow the same version tree so that 3.37.75 isn't actually newer than 3.42.40/50, but we can't tell since the # is lower.
I am curious too Why would VZW release an outdated radio.....
mkenny2 said:
I am curious too Why would VZW release an outdated radio.....
Click to expand...
Click to collapse
My guess is that when they started testing this ROM internally, that is the radio which was available.
OK, so if anyone tries this new 3.37.75 radio with the dcd ROM please post your results... GPS still run? Any faster? Better signal strength? etc etc etc
Chimp (Tom)
SimpTheChimp said:
OK, so if anyone tries this new 3.37.75 radio with the dcd ROM please post your results... GPS still run? Any faster? Better signal strength? etc etc etc
Chimp (Tom)
Click to expand...
Click to collapse
is there a better way to test signal strength other than using the voice command and asking what its signal strength is?
mkenny2 said:
I am curious too Why would VZW release an outdated radio.....
Click to expand...
Click to collapse
its not an outdated radio - you cant compare the numbers of the radio from one carrier with the numbers of another radio from another carrier since all carriers arent using the same radios (even though they may be compatible with different networks)
For example, the XV6900 is newer than the XV6800 but it is far from being better and in fact has a crappier processor.
deeznuts2 said:
i
For example, the XV6900 is newer than the XV6800 but it is far from being better and in fact has a crappier processor.
Click to expand...
Click to collapse
last I heard they shared the same msm7500 series processor. with equal specs. 6900 (touch) just had twice the ram.
SimpTheChimp said:
OK, so if anyone tries this new 3.37.75 radio with the dcd ROM please post your results... GPS still run? Any faster? Better signal strength? etc etc etc
Chimp (Tom)
Click to expand...
Click to collapse
I'm using it.. works fine... I was having probs with the new one switching to 1x mode and sticking there from text messages but haven't seen it yet on this one... all radios are fairly similar I doubt you can really tell too much of a difference unless u saw something bad happening with one of them.
deeznuts2 said:
its not an outdated radio - you cant compare the numbers of the radio from one carrier with the numbers of another radio from another carrier since all carriers arent using the same radios (even though they may be compatible with different networks)
For example, the XV6900 is newer than the XV6800 but it is far from being better and in fact has a crappier processor.
Click to expand...
Click to collapse
Same processor more RAM how it is crappier? You might wanna check your facts before posting.
SimpTheChimp said:
OK, so if anyone tries this new 3.37.75 radio with the dcd ROM please post your results... GPS still run? Any faster? Better signal strength? etc etc etc
Chimp (Tom)
Click to expand...
Click to collapse
So Radio 3.37.75 seems in some ways more stable than 3.42.50 so I wonder about the version numbering. One real improvement is in bluetooth. With radio 3.42.50 I can't use the serial profile with a GPS receiver and headset profile at the same time. The headset profile disconnects the serial profile with in 30 - 45 seconds and if the connection recovers it's only for short bursts. With the new radio both my GPS and headset work great in parallel.
I'm also noticing faster GPS response especially on cold start. Either way I'm sticking with 3.37.75 for now over 3.42.50.
Thanks
Scott
NexVision said:
Same processor more RAM how it is crappier? You might wanna check your facts before posting.
Click to expand...
Click to collapse
My bad - basing info off of the sales rep in local VZ store - but I should have known better not to trust those guys (and gals)
I've looked through countless posts and on the wiki and have yet to find the answer to this question. If it has been answered and I missed it, I'm sorry... I'll look harder next time.
I just purchased a Fuze from a good friend of mine who works in an AT&T corporate store. Since this version supports the US 850mhz 3G band, I need to know if I will loose that support or possibly brick my phone by flashing a radio from a version of the Raphael that does not support this band.
Thanks again for the help.
Zoisite said:
I've looked through countless posts and on the wiki and have yet to find the answer to this question. If it has been answered and I missed it, I'm sorry... I'll look harder next time.
I just purchased a Fuze from a good friend of mine who works in an AT&T corporate store. Since this version supports the US 850mhz 3G band, I need to know if I will loose that support or possibly brick my phone by flashing a radio from a version of the Raphael that does not support this band.
Thanks again for the help.
Click to expand...
Click to collapse
Test it out and let us know. Would be good to figure it out.
AllTheWay said:
Test it out and let us know. Would be good to figure it out.
Click to expand...
Click to collapse
Well I'm working all day today, but I'll be sure to do the flash tonight and post the results in the morning. Then I just need to figure out how to remap the keyboard from the Touch Pro default to the custom Fuze keyboard...
Zoisite said:
Well I'm working all day today, but I'll be sure to do the flash tonight and post the results in the morning. Then I just need to figure out how to remap the keyboard from the Touch Pro default to the custom Fuze keyboard...
Click to expand...
Click to collapse
As soon as I get my Fuze I will work on that as well. Maybe take a page from TarsusBulba as he did in the Kaiser Forum to make the Tilt hardware keyboard with with HTC Roms
mods...please lock this thread. ain't no one getting no info around here until i get my fuze!!!
rzanology said:
mods...please lock this thread. ain't no one getting no info around here until i get my fuze!!!
Click to expand...
Click to collapse
Um....aren't you a mod?
AllTheWay said:
Um....aren't you a mod?
Click to expand...
Click to collapse
lol oh....aight. well.... no one still aint getting info around here!!!
Zoisite said:
Well I'm working all day today, but I'll be sure to do the flash tonight and post the results in the morning. Then I just need to figure out how to remap the keyboard from the Touch Pro default to the custom Fuze keyboard...
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Tweaks
Bottom of the page, its the cab to remap your Fuze.
Well, I promised to post my findings, so here it is:
My Fuze can still connect to the AT&T 3G network with no issue even after flashing the .28 radio from an international Touch Pro. Really adds to the mystery of why the Touch Pro can't do US 3G yet the Fuze can...
Zoisite said:
Well, I promised to post my findings, so here it is:
My Fuze can still connect to the AT&T 3G network with no issue even after flashing the .28 radio from an international Touch Pro. Really adds to the mystery of why the Touch Pro can't do US 3G yet the Fuze can...
Click to expand...
Click to collapse
Thanks for the info.
P1Tater said:
Thanks for the info.
Click to expand...
Click to collapse
so tater started doing anything to your fuze yet bro? e.g trying what the op is suggesting??
Mhm. Here is the cab for fixing the keyboard. [Link]
thesire said:
so tater started doing anything to your fuze yet bro? e.g trying what the op is suggesting??
Click to expand...
Click to collapse
Not yet. I like to be security unlocked prior to any sort of flashing. It's just a preference thing after the Kaiser Radio from Hell fiasco.
P1Tater said:
Not yet. I like to be security unlocked prior to any sort of flashing. It's just a preference thing after the Kaiser Radio from Hell fiasco.
Click to expand...
Click to collapse
no doubt. That truly was a nightmare until franken came along
Reflashing from different carriers?
Verizon and sprint run CDMA and EVDO, and ATT runs GSM(edge) and UMTS, I'm not really such you can just re-flash the radios to swap networks, I maybe wrong but I would like to know also. Anybody?
Towertopper said:
Verizon and sprint run CDMA and EVDO, and ATT runs GSM(edge) and UMTS, I'm not really such you can just re-flash the radios to swap networks, I maybe wrong but I would like to know also. Anybody?
Click to expand...
Click to collapse
no no no ... you can't swap gsm radio rom to a cdma phone ... it won't work and you might end up bricking your phone.
i believe what the op is asking if he will loose us 3g ability if he flashes a european 3g radio rom that doesn't support the att 3g band. And imo i think yes you will loose 3g by doing that. If this was avoidable than everyone who bought a international rapheal could have been using it here in states with att/tmobile 3g...
thesire said:
no no no ... you can't swap gsm radio rom to a cdma phone ... it won't work and you might end up bricking your phone.
i believe what the op is asking if he will loose us 3g ability if he flashes a european 3g radio rom that doesn't support the att 3g band. And imo i think yes you will loose 3g by doing that. If this was avoidable than everyone who bought a international rapheal could have been using it here in states with att/tmobile 3g...
Click to expand...
Click to collapse
Yet I did not loose my 3g ability after flashing the european radio. The question now is why?
P1Tater said:
Not yet. I like to be security unlocked prior to any sort of flashing. It's just a preference thing after the Kaiser Radio from Hell fiasco.
Click to expand...
Click to collapse
Doesn't Olipro's Raphael Unlocker do just that? Are you saying that you just haven't done this yet or that this program needs to be updated for the Fuze? Also I noticed the SPL version is 1.95.0000 on my Fuze, not 1.90. Do you think it is safe to flash RaphaelHardSPL-Unsigned_1_90_3? Happy to test my new Fuze but just need a little reassurance first I'm not likely going to brick this new puppy. Thanks.
Good to see some top Kaiser guys here with the Fuze. Give me comfort in knowing we will have a strong Fuze following.
radio question
bersca said:
Doesn't Olipro's Raphael Unlocker do just that? Are you saying that you just haven't done this yet or that this program needs to be updated for the Fuze? Also I noticed the SPL version is 1.95.0000 on my Fuze, not 1.90. Do you think it is safe to flash RaphaelHardSPL-Unsigned_1_90_3? Happy to test my new Fuze but just need a little reassurance first I'm not likely going to brick this new puppy. Thanks.
Click to expand...
Click to collapse
i believe there are a few people who successfully flashedhe Fuze. I'm in the process of doing so as well, just flashed Romeos2.
now this question might come off as stupidest you'll ever hear, but please bear with me as this is the first time i'm flashing a rom. do i have to do anything about the radio after flashing the rom? (a better question is: does flashing rom get rid of the radio so that I have to get a new one?)
thanks guys for the help.