the memory i´ts full so their not pass the splash screen.someone help me please to make a hard reset.i use the win 6.1 s.o thanks.
Turn Off The Phone , Keep Both Softkeys Pressed And Press The Power Button (keep Softkeys Pressed) And A Message Will Appear . Just Follow The Instructions
they not work
i try but not result,i pressed about 2 or 3 minutes but they not pass the screen "mobile operator".i think they do not have suficient memory to start the s.o.because before reboot the phone the memory avaiable it´s a 16 kbites.i think the problem it´s the memory and a hard reset resolved the problem but this group keys not result.i start to belive i´m fuc... hum hum hum!!!
reset oxygen solution
finaly i solved the problem.so for everyone they have this problem you first press the power button and wend the keyboard make light you stop press power button and press both sofkeys and not stop before appear the blak screen so you stop press the softkeys and press only the call key and wait a few moments,the welcome screen appears.the desespere hits a god incentive.tanks to everyone they try to make this site betther day by day and to florinox to.
Related
i have a big pro , i soft reset my htc tytn , and now it is not passing the windows logo stage , it is not even getting sync with pc how to format it , plz help me
Hold the two soft keys (top buttons above the green dialer and red hang-up keys) down and use the stylus to reset.. Hold all the buttons in until it says to reset back to factory. Press r on the slideout keyboard and then press the space bar...
Make sure you put Hard SPL on your phone though (if you haven't already)... If something happens that Hard reset can't fix, like it goes to tri-colour screen (bootloader) this may not help... Then you may need to reflash an os.
Read up on this Here - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.
there is nothing in the wiki or anywhere that explains how to hard reset (unles i just missed it somewhere)
Not sure if they apply to the CDMA but here are the ones from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners
I use a variation of those on my GSM RAPH, try #1 to see if it works for your CDMA RAPH:
1) Hard Reset
- Turn off
- Press & hold Action
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release buttons
- Follow onscreen instructions
2) Bootloader for Flashing new NBH
- Turn off
- Press & hold Volume Down
- Turn on
- Wait for TriColor Bootloader and release button
- Start ROM Flash utility on PC. If flashing a RAPHIMG.NBH on SDCard, flash begins automatically.
HTH,
For my sprint tp, I've found the easiest way is with the device turned off, I press the vol. down then the center of dpad while holding both then press the on/off button holding all three untill the onscreen instructions appear.
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Tregrad said:
this thing will NOT hard reset, its about to go HARD against the wall LOL
I get a window that says
"warning"
power will be turned off,
and you may lose data if
you have not saved them.
Do you want to continue?
if i hit yes it just rebbots, and obviously if i hit no it does nothing
just cleared storage and will try after to hard reset.
NOPE still not working, im holding the vol down and the enter key then pressing the power button on top and holding all three down and i still get the same message.
even tried it with vol down/dpad/power and noada zip zilch zero
Click to expand...
Click to collapse
Do you happen to have a Verizon Touch Pro, if so the only way to Hard Reset is to do Clear Storage under Settings, System.
My STS got stuck halfway while updating , which i don't understand why as I've reset the STS to factory setting before downloading the contents to update , is there anyway to resolve it ? Now on the screen is showing " Error (0x00010002). " which i can't even "Google" it to find WTH problem am i facing with . Personally been to the Service Center trice regarding problems with the tablet , doubting my tolerance limit if i have to go once again and wait for ages before hearing any news about it .....so any Pro Might have Any Idea what is the problem ?
To be clear, do you have a bricked device now?
Or does it still reboots?
Option for if it dont boot normally
1. Shut down your tan by long pressing power button
2. Wait for 5 seconds,
3. Press volume down + power button to get in recovery
4. Navigate with the volume rockers, and confirm your option with the power button
5. Search for factory reset, try that one,
there website talks about it but no info about firmware .
problem is the table is stuck with the voice login and no way to get to the keyboard to type the password to login.
and no volume button only power and menu. so i'm unable to make it to recovery to hard reset it.
to hard reset they told me hold power home until dopo screen then press power then home should reset but not working
i know there is no double posting but wow 46 view and no help i know that this table is crappy 40 dollers but dam
1- turn the tablet off
2- hold both power and home for about 10 seconds
3- when you see the dopo boot screen: release the power button but hold on to home for a few more seconds
4- when the screen flickers: release home
5- you're now in system recovery, use home to scroll down (there's no up but it loops around) and power to confirm
6- do what you need to do
cheers!
bloodlion said:
there website talks about it but no info about firmware .
problem is the table is stuck with the voice login and no way to get to the keyboard to type the password to login.
and no volume button only power and menu. so i'm unable to make it to recovery to hard reset it.
to hard reset they told me hold power home until dopo screen then press power then home should reset but not working
Click to expand...
Click to collapse