Please help i have searched high and low, and all around the internet
i have a tmobile wing flashed with ASerg.12.WM61E.WWE
And my hands free headset is a motorola H500
I can get the phone and the headset to pair but i cant the headset to work.
If i press the button on the headset i get nothing
and if i call somebody via the phone and press menu, i dont even get the option to send to hands free. but the devices are paired according to the bluetooth manager.
any help would be appreciated
try connecting using HTC btquicklink
that actually works for me when the usual way does not.
Related
Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
i got a I-tech r35 headset, i have no problem pairing the headset with the phone for the first time, however, after i turn off the headset and try to pair it again at a later point, i can't....
the phone only recognize a headset for the phone, and no stereo music from the headset...
is there any specify setting i need to change?
thanks
anyone have the same problem??
I have the same one, and it works fine for me.
If you recieve only the phone on your stereo bt.
try to go BT config, then on devices list, tap and hold on i.R35 or whatever name you've got on it, a list will appear, then select "set as stereo.."
That should works, at least it does for me.
What rom are you using? I'm on Schaps 3.54c right now.
Hope this help.
Regards
Hi guys,
i have a SE HBH-DS970 stereo bluetooth headset and i can't pair it with my G1. the phone can't see the headset. is there another way to pair it? i need it only for calls till A2DP will be supported.
any ideas?
Are you sure the headset is in pairing mode and has the handset profile?
the headset doesn't have to many options so yeah it's in pairing mode. i took out the manual to see if i'm doing something wrong but still no luck, the phone doesn't find the headset. i had a diamond before i switched for G1 and it worked perfect.
no ideas? (
List of compatible devices. If yours isnt on there then im guessing it needs A2DP or one of the other not yet supported profiles.
http://forums.t-mobile.com/tmbl/board/message?board.id=Android3&thread.id=22405
well Motorola HT820 is listed there, but my friends and mine won't play music from our g1s .. i hoped at least for mono xD but nothing.. just pairs^^
For music you will probably need to wait for A2DP support.
mrjay said:
Hi guys,
i have a SE HBH-DS970 stereo bluetooth headset and i can't pair it with my G1. the phone can't see the headset. is there another way to pair it? i need it only for calls till A2DP will be supported.
any ideas?
Click to expand...
Click to collapse
Press and hold power button durin turning on. It might help. I had same issue with my Plantronic BT headset.
kormanb1123 said:
Press and hold power button durin turning on. It might help. I had same issue with my Plantronic BT headset.
Click to expand...
Click to collapse
Excellent )
it worked. i managed to pair it. Thanks a lot man!
Hi, just wondering anyone able to get phone call with bluetooth headset. I was able to connect bluetooth headset successfully but when making call, i can't hear the voice from other party. But playing music was ok. Someone pls help and confirm. Just wondering is my root and rom problem.
in addition, calling using viber can use bluetooth headset without problem.
Thanks alot
Once you have paired your device, long press it in Bluetooth settings then select options and select 'Tablet' for phone calls to be sent to it.
Tablet = Phone audio
Media = All other audio
So has anyone figured out how to use a bluetooth headset without root
Were you guys actually able to get it to pair and connect to the headset profile? not just the "media" profile?
I don't seem to have a tablet profile but I'm sure that's because I am not rooted (Evo View 4g)
I thought this was fixed in JB, but I guess not.
I've got my GS4 paired with both the car and my Jawbra headset. All works fine in either scenario, but occasionally I'm on a call using my car BT and want to switch to my headset, or visa verse. Isn't there a way to just click a button/option in phone and switch the device? Anyone found an App for that (I've been searching for hours).
I'm hoping that I'm just missing something, but I've been trying to Google and search these forums to no avail.
I can't try it but what can't you just press the headset button in the midcall menu?
SmokeyMon said:
I can't try it but what can't you just press the headset button in the midcall menu?
Click to expand...
Click to collapse
That sounds like a great idea, I would love it if it worked that way. But the phone get's itself "paired and connected" to the car, and it is not connected to the Jawbone. The only thing I found to change it during the call is to turn off bluetooth, which forces a pickup on the handset. I suppoose I could try to turn BT back on, and get it to connect to the Jawbone, but that's no practical while driving and trying to pay attention to a phone conversation.
A simple pop-up with "connect to Jawbone" or "connect to car" would be nice during the call.
If you just want to you your headset to take calls and your car bt for audio, try deselecting "phone" in your bt device options on the phone.
Also I think this issue is more with the Samsung phone then with Android. My Nexus 4 was able to do just this and also allow me to take calls on my bt headset while my phone was plugged into the aux jack in my car.