As you know Diskimage_ver.nb0 is the file for flash from pc (c:\windows\temp) and diskimg.nb0 is for flash from sd card.. and the only difference is 12-byte data.. so i bored to delete it from hex editor every time and build this little batch file.. the only thing u should do is put Diskimage_ver.nb0 to folder and run convert.cmd.. hope it will helps you too..
http://rapidshare.com/files/142332594/convert.rar.html
Regards..
Thanks a lot mate will try it and let u know about the result.
Thanks,a very useful tool~
Thanks a lot, it's marvelous tool!
I cannot get it to work "Error diskimg_ver.nb0 not found"?
I have placed the nb0 file in the same directory as the convert.cmd
Any help is appreciated.
mikkelbn said:
I cannot get it to work "Error diskimg_ver.nb0 not found"?
Click to expand...
Click to collapse
It works quite well. U should have dd.exe and convert.cmd in tha same directory where u put diskimage_Ver.nb0 and u will have no prob.
good! saves some time
Related
:?: I have read it allready some where but i forgott where. Could some one give me one ideea?
Place to go is...works fine and is free..
http://www.pdagold.com
Soory Wrong [email protected] windows..
www.penreader.com
the software to make your XDA show sms senders name
which software on the above url allows u to read the mane of the sms sender. i looked around and could not find it. would it be possible if you could give me the exact url for the page the software is on.
thank you shammy :lol:
try this link
http://www.penreader.com/PocketPC/SMS_Name.html
inter your email/name ..
its shammy again, what it is that i have downloaded the file and extracted all the content. know how do i active that software onto my XDA.
thanks shammy :!:
just transfer the file into your xda my document then click on it after
that it will ask u to restart(soft reset) the xda ,,,thats it
Hi I also could do with some help on this, I have done the same, I have recieved the file by email, i have then unziped it then unziped again and this gives me 3 files, i put all of then into the "my Docs" dir on the XDA but none of them will run if i click on them, Please tell me what i am doing wronge
Thanks
John
u have to connect your xda to your pc with microsoft activsync 3.5
unzip the file then copy them into xda ,click on the sutup file
then system wil ask u to soft rest/restart and thets it
Just copy the *.cab file (containing 3 files) to your XDA and run it from there. (double click on the *.cab file while using the explorer of the XDA)
Greetings, Kaputter :shock:
Thanks for your help on this, I have done what you said and it now works fine
Thanks
John
I have done all the above, i have tryed putting the compressed file into my XDa and the uncompressed but i am not able to open the files because i can find them on my xda. could you please me find the files. thank you
shammy
[email protected]
please guest could you tell me how to get the sms message up
please email me at [email protected]
- Unpack the compressed file on your PC (if you have a ".zip" file), you should end-up with a file with a ".cab" extension.
- Now transfer this file to your device with ActiveSync, don't worry about the directorie, just put it on the device.
- Now, on your device, find the ".cab" file using the file explorer.
- Double click the ".cab" file, it should install itself.
- After this you can delete the ".cab" file but don't be surprized if it is allready gone, that is normal.
Now it should work!
I emailed you the file + the instructions
done!
Open the exe with WinRAR.. I think that will do it for you.... you may even need to extract another exe within the top exe... the RUU_signed.nbh file should be 70-90M in size.
Mike
done! thanks everyone
Don't be lazy.
Run winrar by itself.
Search for the .exe file from winrar and open it.
You will see the .nbh files.
calculus said:
Don't be lazy.
Run winrar by itself.
Search for the .exe file from winrar and open it.
You will see the .nbh files.
Click to expand...
Click to collapse
Make sure you change it to open "all files" from the open dialog box, not just the archive files.
Mike
Thank you!!!!!!!!!!!
I realize this is an old thread but still wanted to say a HUGE thank you for this info!!! So many of the ROMs are in exe form and I can now try them out. Thanks again!!
ANother thanks for an old but helpful thread
Life Saver
This Post saved my device the USB went out and I though I was stuck on a custom ROM
I'm rather new to these kind of devices so please excuse the ignorance.
I have an XDA Atom Exec, I upgraded to WM6 with this site successfully.
I also would like to install HTC Home and Customizer as I like the big clock and icons, however I can't seem to find instructions on how to install them. I tried using the search function but nothing came up.
Can someone explain it to me please? Thank you.
Have you downloaded the cab files for HTC HOME and CUSTOMISER , if so just go copy them to your phone and then navigate from the file explorer of the phone to where you have pasted , and run (tap) Hope this helps.......
If you have not downloaded them ....find Ironeagles thread on this forum , to find the links
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Carty said:
Or you can download the cab from http://www.pocketemu.com/download8.html
Regards,
Carty..
Click to expand...
Click to collapse
Hey Carty, I would like to ask about your Ultimate Theft protection. If I flash a new ROM, will it still be there?
xda noob said:
Hi, thank you for trying to help.
I think the problem is that I can't run the "setup". It opens in Internet explorer just like on my PC, I downloaded another copy from Carty's site and the same thing happens. Do I need a special program to open the setup XML file?
Thanks again..
Click to expand...
Click to collapse
describe in steps how you did your installation. we don't usually deal with xml files for installation.
jiggs said:
describe in steps how you did your installation. we don't usually deal with xml files for installation.
Click to expand...
Click to collapse
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
No mate , you dont have to ZIP it (you are actually zipping the cab file which runs directly on the ppc , copy the .cab file without zipping it to your PC and then run ..)
This is what you do wrong
xda noob said:
Well after downloading the zip file to my PC, I unzipped it in a created folder.
Sync'd my atom exec with the PC.
Opened File Explorer from ActiveSync, opened Program files on Atom Exec and just moved created folder with unzipped file into Atom.
After opened the created file from within the device and click "setup" with the stylus.
It opens up Internet Explorer and I can only view it as a document of some sort.
Hope that makes sense
Click to expand...
Click to collapse
if you will list the contents of your zip file, that would be helpful. we don't normally copy files to program files for installation.
Thank you everyone... the problem was exactly what udayrulz was describing. I merely had to just move the file over to the device and click it, instead of unzipping, create a folder etc.
Thanks again, this plugin is much easier on the eyes!
No Problem , glad it worked out
Hi guys, im new to smartphone, how can i convert files from .rar to .apk?
if this question has been asked before just send me the link, i did tried to search and i did not find similar request.
Thanks
A "rar" file is a compressed archive, like a ZIP file.
www.rarlabs.com to download the program.
I open it with winrar and i cannot find any .apk file on it, i only see some meta-inf folder and .dex .xml and .arsc file.
any advice from experts?
thanks
See the tutorials link in my sig.
i do it this way !! u can either do it thru any file managers thru ur phone ( which is always better) or thru ur system.
just change the .rar /.zip to .apk
eg:- angrybirds.rar to angrybirds.apk !! simple!!
xarchitect said:
i do it this way !! u can either do it thru any file managers thru ur phone ( which is always better) or thru ur system.
just change the .rar /.zip to .apk
eg:- angrybirds.rar to angrybirds.apk !! simple!!
Click to expand...
Click to collapse
Thanks, this one work for me
I have been working on rom development for LG Quantum. I have managed to extract the rom parts and from that, I have a "flash.bin" file which has (contains??) the OS.nb file. The only problem with it is that the flash.bin file has a "RA000F" header in it. HTC Rom Editor opens flash.bin if I rename flash.bin to OS.nb, but crashes when I try to get at files within it. I have tried finding the D000F header within the flash.bin file and extracted OS.nb from there. HTC Rom Editor allows me to extract imgfs.bin from the OS.nb that came from the flash.bin file. If I use the OS.nb taken from flash.bin, I can modify and rebuild the OS.nb with any changes I make, but then I can't reintegrate the changed OS.nb back into flash.bin.
Are there any tools which allow me to work with files with the RA000F header in them? Also, is there any real information (documentation) available on the RA000F rom format? I can't seem to find any real documentation on it.
Can anyone help me?
Please send me link for your rom , i try dump it
WojtasXda said:
Please send me link for your rom , i try dump it
Click to expand...
Click to collapse
Dump with what?
anaheiim said:
Dump with what?
Click to expand...
Click to collapse
Flash.bin from first post