i tried to install the latest At&t ROM and i got an error asked me to try and recover it but when i try to recover it it still give me an error message and now my phone is stuck on the bootloader screen it says IPL-1.00 SPL-1.40.Olipro can someone please help me get this out of bootloader mode...i tried reseting it or tried other ROM's but nothing will work....TIA
i can't even get my pc to recongnize that my 8525 is connected to the USB port....
EDIT: I got my PC to see my 8525 by unchecking the USB connections in ActiveSync....
I think this is a crosspost from the HardSPL receovery thread, so I will just answer it here.
Manually put phone in bootloader mode.
Plug into USB
Run RUU to start ROM install
Manaually select your SPL version
Ignore warning in red letters on next screen
Flash away.
(Do not mix up the first two steps - put in bootloader, THEN plug into USB)
If this does not not work, use SD Card flashing method.
help pls my atom always in boot loader mode, i have try upgrade to wm6 jiggs rom or the official o2 rom, but always stuck in bootloader mode can anyone help me pls
sorry my bad english
Pls explain what you did and what is the current status of your device clearly..
I think you should be able to reflash. Does it say "connect a USB cable" on screen, or is there just a jumble of text like a DOS prompt?
Try connecting via USB and run the update executable again. That usually works.
If that isn't your problem, I'm currently not good enough to solve it for you.
Had the same problem flashing WM6.03 before. Changed the USB cable and reflashed. It worked. Sometimes the problem is in the connection no the device or PC.
yes the device say "connect a USB cable" but i already flash 4x time = 3 x time with the official o2 rom 1 x with wm6 aku7.0 from jiggs, but it's doesn't work my atom stuck in "connect a usb cable", pls help
yes i already change n reflashed but stuck in screen "connect a USB cable" n i tried soft reset but once again back in screen "connect a USB cable" any one can help me what rom i should reflash for bring back my atom,
Methinks your flashes went wrong because it didn't flash the extROM successfully. This only happens if you're using the hacked Atom Exec ROM on the Atom. <_<
When I ended up like this once, all I did was keep on trying and trying again until the entire procedure goes right through (it will do so eventually). That's the only answer I know.
I can't help any further.
yuberthegreat said:
yes i already change n reflashed but stuck in screen "connect a USB cable" n i tried soft reset but once again back in screen "connect a USB cable" any one can help me what rom i should reflash for bring back my atom,
Click to expand...
Click to collapse
read the Atom Wiki under upgrading problems.
Well I was trying to upgrade mt niki to 6.1 but apparently I must have missed a step or did something I shouldt have and now I am stuck with the color bar screen. Can anything be done? I am running Vista.
tri-colour = Bootloader
The tri colour screen is the boot loader screen, when you updated, did the progress bar go allll the way to 100%?
If so, its in bootloader, try to flash another rom from you computer,
Also run through what you done to update - What rom also. Did you hard-spl, Uspl or anything like that?
It stopped at 15%. These are the directions I was following:
Originally Posted by Judge584
Follow these steps:
1. download the attached files (flash-uspl-niki.zip & sspl-1.16-nike)
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the uspl by running ROMUpdateUtility.exe from flash-uspl-niki
9. Now you can flash the latest rom update to have spl 1.22 and wm6.1.
ouch, Thats the only problem with sspl,
urmm.
How long did it stay at 15%?
As the device isn't CID unlocked you can only flash official roms...
Find an official rom, in the bootloader connect the USB and see if it will flash. It should do!
fingers crossed..
the only rom I can find for singtel in singapore is an updated one so I am trying that now so far so good, I am at 30%. So if this will get me going again can you offer a little advice or explination as to your last post, how do I go about loading a newer 6.1 rom on my device?
Of course, thats what these forums are for. The singapore rom shouldn't hassle you tooo much if you know your way around Windows mob well enough. Let me know how it goes and i'll help you through..
Deejaynate said:
Of course, thats what these forums are for. The singapore rom shouldn't hassle you tooo much if you know your way around Windows mob well enough. Let me know how it goes and i'll help you through..
Click to expand...
Click to collapse
well i was able to fix it by using the singtel rom. I want to use the Niki SuperCID unlocker but I have to install the " HardSPL 1.15 MFG " first - can you walk mw through this so I dont brick my touch again. do you have messenger?
yeah Windows live messenger, add me [email protected]
sorry to hijack your thread, but I encountered exactly the same thing. The screen is now stuck with 3 colour bands. I tried to flash it with an official rom, but the computer is not connecting with the phone, active sync does not recognise the device, any help!?
this is what I did:
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. running ROMUpdateUtility.exe from flash-uspl-niki
Sorry for the non prompt reply
I have been at work alot lately,
sorry for a non prompt reply.
Active sync wont connect to your phone, as its in bootloader mode.
At the tri-colour screen, does you computer beep when you connect it, or try to install drivers?
thanks for replying!
no beep from the computer, when connecting the usb to the phone, the phone changes from "serial" to "usb".
I tried reflashing with ROMUpdateUtility.exe from flash-uspl-niki, it will work, but says fail and will go into recovery mode. It will then complete the "recovery" action and go back to flashing new rom which won't work.......
The same ocurred with me!! Help me!
In the middle of an unlocking process, somehow(in the flashing radio process,i got 100%, and then a message saying: an writing error ocurred). So my htc dual got with the image NIKI200 (and four colour - red,green,blue and white..). Now i tried hard reset and after i presse send to initialize, the phone goes to that bloody image....i cant do nothing....what should i do? help me please....regards
luismatos123 said:
In the middle of an unlocking process, somehow(in the flashing radio process,i got 100%, and then a message saying: an writing error ocurred). So my htc dual got with the image NIKI200 (and four colour - red,green,blue and white..). Now i tried hard reset and after i presse send to initialize, the phone goes to that bloody image....i cant do nothing....what should i do? help me please....regards
Click to expand...
Click to collapse
You need to flash an original ROM from your service provider (phone company).
if someone has the same problem, tell me if you could recovery your cell phone, i have HTC S411 and now is bricked.
had this problem a while ago: just switch to bootloader mode, connecth the device to laptop via USB, wait until it's written USB on the screen of the mobile, find the orignial shipped rom (try //wiki.xda-developers.com), run the update, that's all.
Samer.
Hello everyone,
I bricked my HTC desire HD by flashing a wrong CWM recovery. I did this myslef thats why i know it. Now my phone is all dead it does not boot and the bootloader is dead too. There is no device detected with usb, But when i hold down (vol up+ vol down+ power on) a green light starts blinking and the phone shows up in computer as (qualcom CDMA technonlogies MSM). After installing the drivers it is redable in QPST only. This software identifies it as a phone in "download mode"
I have seen on internet tutorials about flashing Bootloader by QPST, these tutorials are about Karbon mobile, LG, samsung but there is no tutorial about htc.
Is there anyone who can provide me a way to flash bootloader with qpst, or qpst firmware for desire HD. Or if any one can convert the original firmware to (HEX) format so it can be flashed by qpst. i will be very greatfull.
I know that JTAG can fix my problem but there is no one in around here who can do this, so my only option is to flash it with QPST or have its mother board replaced.