Hello everyone,
I bricked my HTC desire HD by flashing a wrong CWM recovery. I did this myslef thats why i know it. Now my phone is all dead it does not boot and the bootloader is dead too. There is no device detected with usb, But when i hold down (vol up+ vol down+ power on) a green light starts blinking and the phone shows up in computer as (qualcom CDMA technonlogies MSM). After installing the drivers it is redable in QPST only. This software identifies it as a phone in "download mode"
I have seen on internet tutorials about flashing Bootloader by QPST, these tutorials are about Karbon mobile, LG, samsung but there is no tutorial about htc.
Is there anyone who can provide me a way to flash bootloader with qpst, or qpst firmware for desire HD. Or if any one can convert the original firmware to (HEX) format so it can be flashed by qpst. i will be very greatfull.
I know that JTAG can fix my problem but there is no one in around here who can do this, so my only option is to flash it with QPST or have its mother board replaced.
Related
if someone has the same problem, tell me if you could recovery your cell phone, i have HTC S411 and now is bricked.
had this problem a while ago: just switch to bootloader mode, connecth the device to laptop via USB, wait until it's written USB on the screen of the mobile, find the orignial shipped rom (try //wiki.xda-developers.com), run the update, that's all.
Samer.
I have a motorola motostart (xt390) and wish to unlock bootloader, root, etc. Nevertless, I just can't get into fastboot mode.
Powering up with VOL Down it access the recovery mode. The same for VOL UP+DOWN.
When i try powering up with VOL UP pressed the device simply don't power up.
Is it a malfunctioning device or some roms for this hardware simply have mysteriuos ways to enter fastboot?
The ROM is a brazilian retail, Gingerbread (2.3.6) version MAUI.11AMD.W11.37.SP.V9.F4.P1, build: ARGONM_W_07.15.04R_D.
Please! Help!
Nobody? hehehe
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
erlyneto said:
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
Click to expand...
Click to collapse
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
xshinta9 said:
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
Click to expand...
Click to collapse
Sorry by my ignorance, but SPFT is a software?
I find the SPFT that you mentioned. But, as far as I could understand the software, it is used to flash or dump rom from MTK based phones.
But there are problems:
1)XT390 appears to be based on MTK6*** phones, but is not the same, so, the roms should not work in it, right?
2)I can't use this tool to send commands to the device (like fastboot mode on other Motorola android phones), so i can't get my device id to unlock the bootloader in the morotola web site...
Do you know anything about that software, its roms and XT390? There are any ways to open a command line utility on it?
Hi bro, unfortunately I have zero knowledge on it thus far. 'am figuring out how to unlock my phone's bootloader as well, (it's a local-based chinese phone as well that's marketed under a different name)
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Hello
I can't turn on my HTC Desire SV
This problem arise after unsucessful try update my Android
I can't enter boot menu. I try get out battery, press and hold "volume down", insert battery back and press "power", but nothing happens. I get out both SIM and Memory card and try again, but nothing happens too
If i connect my HTC to PC, PC define it as "Unknown Device"
As i understood, the bootloader crashed probably. To recover bootloader, i need to flash my HTC with special flashing device, e.g. riff box. Is it correct and only solve of my problem? Or other methods to recovery my smartphone (without using special devices) are exist?
Sorry for my English
Thanks in advance
i also have same problem
now i connect my htc disire sv to pc it show qualcomm hs-ysb qdloader 9008
i have riff box bt there is no such model in riff box
any other way to repair boot of my htc disire sv
mukass said:
Hello
I can't turn on my HTC Desire SV
This problem arise after unsucessful try update my Android
I can't enter boot menu. I try get out battery, press and hold "volume down", insert battery back and press "power", but nothing happens. I get out both SIM and Memory card and try again, but nothing happens too
If i connect my HTC to PC, PC define it as "Unknown Device"
As i understood, the bootloader crashed probably. To recover bootloader, i need to flash my HTC with special flashing device, e.g. riff box. Is it correct and only solve of my problem? Or other methods to recovery my smartphone (without using special devices) are exist?
Sorry for my English
Thanks in advance
Click to expand...
Click to collapse
Is your problem solved??? coz i also hav d same problem after flashing boot.img plzz help me
Hello. I'm new here. and not native speaker.
I'll try my best for English.
My device got soft bricked after I'm trying to install the new ROM.
Actually I had installed the ROM but It didn't appear anything.
Then I'd try to restore my backup to Its place.
It made my phone brick.
I can't boot into recovery mode, ROM and also FTM mode.
I must have an access to adb, If I want to boot into bootloader.
But I don't have any access to it at all!!.
I had read some post and I hope that DFU can help me.
But I don't know how can I boot into that mode.
And I had try hold volume + and - with and without power button but it still the same.
I had read that the DFU mode will display nothing but have the briefly red led.
I had accident plug the USB to device without battery.
And I got it, The briefly red led light with nothing change in the display (still nothing).
My computer recognizes it as a ZTE technology device. But It's in an unspecified device zone.
I had installed the ZTE USB device (My computer is MS Windows 8.1) and I had also installed it with unsigned driver mode too.
What could I do for getting it to work again?
Have I found the correct DFU mode?
My device is ZTE V817.
With MSM8225Q CPU and MSM7627A board platform specified in default.prop.