Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Related
I have a motorola motostart (xt390) and wish to unlock bootloader, root, etc. Nevertless, I just can't get into fastboot mode.
Powering up with VOL Down it access the recovery mode. The same for VOL UP+DOWN.
When i try powering up with VOL UP pressed the device simply don't power up.
Is it a malfunctioning device or some roms for this hardware simply have mysteriuos ways to enter fastboot?
The ROM is a brazilian retail, Gingerbread (2.3.6) version MAUI.11AMD.W11.37.SP.V9.F4.P1, build: ARGONM_W_07.15.04R_D.
Please! Help!
Nobody? hehehe
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
erlyneto said:
I have found a clue: if I plug the device without batery and hol VOL_UP the windows detect, and install the drivers, to a "MTK USB Port (COM X)". If I release the VOL_UP the USB port gets disconected.
Someone know what I can do with a MTK port?
Click to expand...
Click to collapse
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
xshinta9 said:
I think that's the same as download mode for when you have to flash it with SPFT. That's how I get spft to recognize my O+8.75.
Click to expand...
Click to collapse
Sorry by my ignorance, but SPFT is a software?
I find the SPFT that you mentioned. But, as far as I could understand the software, it is used to flash or dump rom from MTK based phones.
But there are problems:
1)XT390 appears to be based on MTK6*** phones, but is not the same, so, the roms should not work in it, right?
2)I can't use this tool to send commands to the device (like fastboot mode on other Motorola android phones), so i can't get my device id to unlock the bootloader in the morotola web site...
Do you know anything about that software, its roms and XT390? There are any ways to open a command line utility on it?
Hi bro, unfortunately I have zero knowledge on it thus far. 'am figuring out how to unlock my phone's bootloader as well, (it's a local-based chinese phone as well that's marketed under a different name)
My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.
Hello everyone,
I bricked my HTC desire HD by flashing a wrong CWM recovery. I did this myslef thats why i know it. Now my phone is all dead it does not boot and the bootloader is dead too. There is no device detected with usb, But when i hold down (vol up+ vol down+ power on) a green light starts blinking and the phone shows up in computer as (qualcom CDMA technonlogies MSM). After installing the drivers it is redable in QPST only. This software identifies it as a phone in "download mode"
I have seen on internet tutorials about flashing Bootloader by QPST, these tutorials are about Karbon mobile, LG, samsung but there is no tutorial about htc.
Is there anyone who can provide me a way to flash bootloader with qpst, or qpst firmware for desire HD. Or if any one can convert the original firmware to (HEX) format so it can be flashed by qpst. i will be very greatfull.
I know that JTAG can fix my problem but there is no one in around here who can do this, so my only option is to flash it with QPST or have its mother board replaced.
Hi everyone, i ask for your help cause i have a common problem but the fixes i found in the forum didn't work for me: my ZenFone 5 stucks at "Asus" logo with a "loading loop" wheel below that.
I know this post may be long but i beg you to read all steps:
1) Phone stucks at logo, but could enter recovery (pressing vol + down), i've updated it via external SD card (official firmware but didn't work) then i've wiped data and did a factory reset. Phone still stucks at logo.
2) Now i can't even enter recovery mode... when pressing vol + down it shows 2 options but whatever i choose the phone reboots. If i press vol + up it says "CSC mode, long press power to restart. Phone still stucks.
3) Now (after some time) the phone's screen doesn't show anything, nor charging icon or notification led when recharging, but strangely the computer recognizes it as a device when connected via USB cable, and the led turns on when i do this.
A friend told me to follow a guide that says to install "Intel Soc USB driver", i did that. After installing, when connecting the device, 2 things should pop up in Device Mangager under "Intel Soc": CloverviewPlus Device and Intel Soc USB Driver... but the second one doesn't show to me
I've also tried Asus flashtool guide... at step 4 it says to click in the box icon and choose the firmware RAW file, so i've downloaded a raw firmware for the ZenFone 5, but oddly it doesn't let me choose any raw file.
Note: the phone is recognized by the pc as "QHSUSB_BULK", so i've tried to update its driver with qualcomm drivers, and now it's recognized as "Qualcom MMC Usb storage device". But i think i've did a wrong thing cause my friend told me i should have choosed some kind of official driver
Thanks in advance for your help
Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know