My redmi note prime (dual sim) hardbricked - Android Q&A, Help & Troubleshooting

Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know

Related

[Q] Sanei N10 3g

Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html

[Q] techno p3 problem

hello, i have a techno p3 device.. when i turn it on only the techno logo appears ,it doesn't boot .. i cant also boot into factory mode because it give me the same feedback.. i cant also use ADB to work on it because the drivers doesnt install when i insert my usb .. the only sector i can boot in is the qualcomm diagnostics , i.e holding down the two volume keys and pressing the power button for a vibration feedback and when i plAce my usb it installs the device as a qualcomm 900e hs-usb device...is there any way i can do to get it working .. i have the stock rom...please help me,thanks in advance.

(Help) Asus ZenFone 5 bricked, stucks at Asus logo!

Hi everyone, i ask for your help cause i have a common problem but the fixes i found in the forum didn't work for me: my ZenFone 5 stucks at "Asus" logo with a "loading loop" wheel below that.
I know this post may be long but i beg you to read all steps:
1) Phone stucks at logo, but could enter recovery (pressing vol + down), i've updated it via external SD card (official firmware but didn't work) then i've wiped data and did a factory reset. Phone still stucks at logo.
2) Now i can't even enter recovery mode... when pressing vol + down it shows 2 options but whatever i choose the phone reboots. If i press vol + up it says "CSC mode, long press power to restart. Phone still stucks.
3) Now (after some time) the phone's screen doesn't show anything, nor charging icon or notification led when recharging, but strangely the computer recognizes it as a device when connected via USB cable, and the led turns on when i do this.
A friend told me to follow a guide that says to install "Intel Soc USB driver", i did that. After installing, when connecting the device, 2 things should pop up in Device Mangager under "Intel Soc": CloverviewPlus Device and Intel Soc USB Driver... but the second one doesn't show to me
I've also tried Asus flashtool guide... at step 4 it says to click in the box icon and choose the firmware RAW file, so i've downloaded a raw firmware for the ZenFone 5, but oddly it doesn't let me choose any raw file.
Note: the phone is recognized by the pc as "QHSUSB_BULK", so i've tried to update its driver with qualcomm drivers, and now it's recognized as "Qualcom MMC Usb storage device". But i think i've did a wrong thing cause my friend told me i should have choosed some kind of official driver
Thanks in advance for your help

Redmi Note 3 Pro Unable to Boot, But the led blinks Red when plugged in.

Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Just checking, but did you use the fastboot edl v2 to enter EDL?
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
when i fail to unlock bootloader in official method then i tried miui8 flashboot Rom from mi flash tool with modified emmc_appsboot.mbn file from one of the developer i bricked my Redmi note 3 Qlcmm650
solution:- 1) remove back cover & disconnect the battery around 1 minute reconnect it (recomended one if this not possible for you then try 2nd method)
Or
2)full discharge the battery Then charge it more then 35% (it will also work as diconnecting the battery)
connect the computer &and press volume + & - button together
connect the PC & vol buttons press both are at the same time then you enter the correct EDL mode (same red light but this time correct EDL mode you can flash the rom use official Fastboot rom Dont modify the contents)
if i helped you hit thanks
I was in same situation today: Mobile doesnt do anything else then red-blinking, no edl or fastboot. Pc only saw "Qualcomm HS-USB Diagnostics 900E".
Found the solutions mentioned by Chinmayhegde, but i didnt get the cover off the device and dont want to damage new mobile.
then i found the method "Deep Flash".
its small manipulation of usb-cable: put a small wire on second terminal, put in pc and then pull the wire.
i succeded after second try. then pc sees "Qualcomm HS-USB QDLoader 9008" again and miflash is able to flash the device.
see this tutorial for creating the modded usb cable: http://en.miui.com/thread-310325-1-1.html
Hope it works
if your phone still able to enter fastboot, you can try to use fastboot to edl v2 to enter download mode
if it still not help, most safe & easy mode is using deep flash cable as above post
I have same problem.
Even I try booting fastboot mod but it keeps restarting.
Even fastboot logo comes by just pressing volume down button. So I think power button is stuck. That's make phone restart all the time.
How to overcome this problem?
Thanks
Sent from my SM-G900I using XDA-Developers mobile app
I fix my phone.
Open back cover and undo power cable flex and battery connctor from motherboard and put back after 1 min.
Phone started normal.
thanks
Sent from my SM-G900I using XDA-Developers mobile app
danted7 said:
Recently, I bought a xiaomi redmi note 3 with the 650 version. I switch to Miui 8 China Fastboot Room from a Global Fastboot Rom, also for unlocking the bootloader. But after I have finished my flashing, it turns out that the Note 3 can't turn on, Stucking on the MI logo for 2 times then turns off again. I tried connecting it to the PC, but the led blinks red. I tried to flash the Miui again but it doesn't show the device. My PC recognized the port as Qualcomm HS-USB Diagnostics 900E, but I can't take it to EDL mode. I tried entering it from the Fastboot mode but still didn't work. Any Help?
*P.S: It also blinks red when I entered the Fastboot Mode
Click to expand...
Click to collapse
Try To Remove Your Battery than Use MiFlash Tool To Flash Your Mobile Bro.

HARD BRICKED kenzo

SOLVED
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
vol - and power button press and try to enter in to fastboot...
A Q R I N said:
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
Click to expand...
Click to collapse
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
https://www.youtube.com/watch?v=KzNTxRVF0pI skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
android_smater said:
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
link skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
Click to expand...
Click to collapse
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
Rajat22 said:
vol - and power button press and try to enter in to fastboot...
Click to expand...
Click to collapse
Nothing happened when I press the vol ( - ) button with power button.
Tried to turn on the phone by pressing the power button only and phone is not booting
A Q R I N said:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking
Click to expand...
Click to collapse
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
android_smater said:
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
Click to expand...
Click to collapse
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
A Q R I N said:
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
Click to expand...
Click to collapse
Yes
---------- Post added at 04:09 AM ---------- Previous post was at 03:51 AM ----------
http://bigota.d.miui.com/V8.0.1.0.L...DG_20160805.0000.29_5.1_global_5e65360aff.tgz
Direct link
SOLVED Thanks guys !!!
A Q R I N said:
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
Click to expand...
Click to collapse
Please can you provide me the link to download the driver!

Categories

Resources