hello, i have a techno p3 device.. when i turn it on only the techno logo appears ,it doesn't boot .. i cant also boot into factory mode because it give me the same feedback.. i cant also use ADB to work on it because the drivers doesnt install when i insert my usb .. the only sector i can boot in is the qualcomm diagnostics , i.e holding down the two volume keys and pressing the power button for a vibration feedback and when i plAce my usb it installs the device as a qualcomm 900e hs-usb device...is there any way i can do to get it working .. i have the stock rom...please help me,thanks in advance.
Related
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same
Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?
Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.
Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920
I cant put my phone on download mode, my PC recognizes it has Qualcomm HS-USB QDLoader 9008, because i installed the driver, otherwise i would get USB QHSUSB_DLOAD has a none driver installed.
I've tried so many guides refering to LG G2 tutorials, also other outside-xda guides, but none of them worked, because i cannot put the phone has a "download mode".
Tried many different combinations with the buttoms, but none of em worked. Just if i kept pressing the volume + button, the capacitive buttoms on the touch will light but nothing else, nothing changes on my device manager.
Can you guys recommend me what to do with the phone?.
Thank you so much!, Sorry if this post doesnt belong in this tree.
solution
mike_san said:
I cant put my phone on download mode, my PC recognizes it has Qualcomm HS-USB QDLoader 9008, because i installed the driver, otherwise i would get USB QHSUSB_DLOAD has a none driver installed.
I've tried so many guides refering to LG G2 tutorials, also other outside-xda guides, but none of them worked, because i cannot put the phone has a "download mode".
Tried many different combinations with the buttoms, but none of em worked. Just if i kept pressing the volume + button, the capacitive buttoms on the touch will light but nothing else, nothing changes on my device manager.
Can you guys recommend me what to do with the phone?.
Thank you so much!, Sorry if this post doesnt belong in this tree.
Click to expand...
Click to collapse
Turn the cellphone off
While pushing Vol - Connect it to the pc
Dowanload mode is on
I helped you, so you helpe me man I cant find the files to flash and unbrick my F7! this is my email: [email protected]
Hello there,
i have a serious problem with my phone(redmi note prime dual sim)
*It doesn't go to fastboot(when power and vol- pressed simultaneously )
*No LED blinking when charging
.It doesn't switch on no matter how long you press the power button
when connected to computer, it is detected, but the device manager shows these words
(QHSUSB_BULK)
If install mi-flash is tool installed and the phone is connected to the computer,
(qualcomm HS-USB QDLoader 9008(COM10)
(i guess the mi flash tools comes with some qualcom drivers)
when i try to flash it i get this error
(reached the end of the file.(0x80070026: receiving hello packet))
i badly need this device to work, if there is anything i can do please guys let me know
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
update:
i end up fixing my phone. it was in EDL Mode. i had Flash Using DFC Cable or Xiaomi EDL Cable. i made one from an youtube video ( it was one with button i made, it allow to get get QDLoader 9008 with consistency and without removing the back cover.)
afterthat i just flash it miflash tool with "kenzo_global_images_8.11.22_20181122.0000.00_6.0_global " it had to be DEVELOPER VERSION thought. i dont know if i can do it a second time because it might be a flute that it was able to flash at all LOL. and this is the only phone i have and i dont want to use an Iphone7. one thing i dont like is it wont let me flash twrp or OrangeFox- ( it said it can not found file flash_all.bat) cause when went push vol up + power it just give me standard xiami menu.
when i have a compatible phone on the same cell network, i'll try to flashing a diff rom cause the xiami rom has lots of ads. .
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial https://www.youtube.com/watch?v=xExKvog5RP4
LoadOP2 said:
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial watch?v=xExKvog5RP4[/url]
Click to expand...
Click to collapse
from you tube
tried it, didnt work. it said flash success. but the phone will not power on. VOL up +power not working, vol down + power not working either
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
Are you able to boot your device into EDL mode? If not, try to boot into EDL using the test point method if default method doesn't work. If you're successful in booting up in EDL, Follow the below forum to recover the bootloader and recovery.
Link to the test point method tutorial: https://www.youtube.com/watch?v=_jv1ZVQ95Ng
Follow this after you enter the EDL mode successfully: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778