[Q] k920 bricked blue light only help please! - Lenovo K900

Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?

soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same

Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?

Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.

Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920

Related

IM-A810K Deadboot [HELP]

im installing a new romin my a810k via recovery mode and the progress bar is not moving at all i wait too long and still its stock.
then i removed the battery and try to turn it on but it is not turning on
i tried to charge ,fastboot,and sw upgrade still not turning on, but when i try to plug it via usb my computer detects it in
COM PORT 13 QUALCOMM HS-USB QDLOADER 9008
is it possible to revive this phone ?

qualcomm hs-usb qdloader 9008

Hello everyone ...
While I was surfing the Internet suddenly the phone stopped responding then restart in boot loop.
I can enter recovery mode or download mode but the phone shut down or restart by it self in these modes
I tried wipe cache, safe mode, factory reset while the phone processing it shut down or restart before finish
when I enter the download mode and LGUP sees the phone as (unknown) then the phone shutdown
when I check after each process when the phone shutdown I can find (qualcomm hs-usb qdloader 9008) in the device manager.
If there is any solution for that I'll be thankful.
hi
PLS ADD THIS GUY (vo.minh.148) IN FACEBOOK. today 20/8/2017 this guy unbrick my H900 at&t . he just enter in my PC by teamviewer and i plug my mobile without battery. and he start..
keep ur KDZ file he will use it.
he charge me $20 after unbrick. now my phone is live

Bricked Xiaomi Redmi Note 4 (please help)

My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL

Vivo Y11 2019 hard bricked (stuck in EDL mode)

I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
me too, how to fix it please help
mortal786 said:
I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
Click to expand...
Click to collapse
Try Downloading the Firmware and Flash it via QFiL or QPST
I hope this works

Oops! System partition changed? Lenovo Z6 Youth (L38111) Bricked..

So I was looking around in TWRP, and foolishly, changed the system partition (changed from ext4 to ext3 I believe)..
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
so; no booting, no splash screen, nothing going on, except the green notification blip when holding hard-reset buttons. I've been searching online and saw some guys using a deep flash cable to short circuit the testing pins, does anyone have experience with this fix?
any help would be appreciated..!
Quince
QuinceDroid said:
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
Click to expand...
Click to collapse
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
jwoegerbauer said:
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
Click to expand...
Click to collapse
I am aware of that, however, my PC doesn't recognize the device when I try to enter EDL mode (Yes, i have installed the qualcomm USB drivers, QDloader, QPST, adb drivers etc)
I fixed it eventually with a Deep Flash cable [EDL] ! It was the only way to trigger the EDL mode. It's aliiive!!

Categories

Resources