My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL
Related
my note 3 pro is bricked
i can go into fastboot, but my devices shown as "Qualcomm HS-USB Diagnostics 900E"
the thing is everytime i connect my note 3 when fastboot to my laptop and run adb tricks to go to edl
my devices isnt showing as it said
"<waiting for devices>"
i found some words about using QPST to update Qualcomm 900E to 9008 but i didnt find proper tutorials and tools needed
anyone can gave me advice on QPST tricks and tools
Deep flash cable
You have to make "Deep flash cable" Search un google
Hi,
I start with flashing RM3 kenzo, my brother don´t tell me that he has kenzo, so i flash hennesey via SP-FLASH.
Phone don´t start, just black screen, I wanted to recovery via EDL, but I am confused, Its possible now ?
If I plug phone to PC, device manager is showing loop of:
Mediatek Preloader usb VCOM
USB serial device
There is a way to recovery it ?
THANKS
try use miFlash, if your device is detected (COM?) you may flash the right ROM
ridsa said:
try use miFlash, if your device is detected (COM?) you may flash the right ROM
Click to expand...
Click to collapse
phone is in loop, device manager show MEdiatek usb port, after 1s Mediatek preloader vcom usb, after 1s nothing and again again.
Miflash dont show any device
Can i get to Qualcomm HSUSB QLoader 9008 ?
If it show mediatek preloader ? Is HSUSB QLoader definitely lost?
THANKS
Is it phone still can accessing fastboot mode..?,
you can try press and holding vol down plus power button to force rebooting into fastboot mode..then try reboot into EDL mode from fastboot with this method here,
If success go into EDL mode..you can continue flashing with miflash tool.
No it´s not, I am trying get to EDL mode with EDL cable, but windows say unrecognized drivers and after 2s phone detach, in device manager see nothing.
I accidentally flashed Redmi note 3 firmware into Redmi note 4. Now only red light is blinking. No fastboot also. Computer showing in ports Qualcomm hs usb qdloader 9008 (com3). Please help me flash full fastboot rom
if your computer detects your device as qdloader , that means it is in EDL mode, in this mode , you should be able to flash fastboot roms using miflash , you should read this thread first, http://en.miui.com/thread-565784-1-1.html . although the thread writes about flashing in fastboot mode, but it shouldn't differ alot from flashing in EDL mode, just follow the B part of the guide in the link, MIFlash should be able to detect your device and list it down as COM(number) .
As for the driver part, you shouldn't need to update anything if MIFlash can detect your device , as your computer already correctly detects it as QDLoader
chun_9876 said:
if your computer detects your device as qdloader , that means it is in EDL mode, in this mode , you should be able to flash fastboot roms using miflash , you should read this thread first, http://en.miui.com/thread-565784-1-1.html . although the thread writes about flashing in fastboot mode, but it shouldn't differ alot from flashing in EDL mode, just follow the B part of the guide in the link, MIFlash should be able to detect your device and list it down as COM(number) .
As for the driver part, you shouldn't need to update anything if MIFlash can detect your device , as your computer already correctly detects it as QDLoader
Click to expand...
Click to collapse
Thankyou for your valuable reply. Miflash detecting device. But error in flash. Then removed back cover and removed battery connection also. Then Miflash flashed the rom successfully
Red lights blinking when plugged in, shows up as "Qualcomm HS-USB Diagnostics 900E"
Hi,
my Redmi Note 3 (Snapdragon) suddenly stopped working and won't turn on again.
It is from Gearbest and had probably a shop rom installed. I didn't flash any ROM or didn't root it but i checked the "OEM unlock" option in developer options. After that it was bricked (?).
Fastboot doesn't work, it won't turn on (nothing on the screen) and it is recognized in Windows as "Qualcomm HS-USB Diagnostics 900E" when plugged to the pc. Also the LED blinks constantly in red.
Is this already EDL mode?
I tried to use Mi Flash and it didn't recognize the phone. After manually installing "Qualcomm HS-USB QDLoader 9008" in the device manager Mi flash detects it.
When i try to flash a fastboot rom i get the error "sahara read end error with status: 9".
Also tried to open it and short circuit the testpoint pins. In this moment the device is regognized again but nothing changes and it's exactly like described before.
Is the phone dead or can i try anything else?
Thanks
I can't say fire sure but it seems like a hardware problem and that most likely means that it's dead.
You also posted this in the wrong section. This should be in Q&A/Help section. Not in development.
Try charging it for a while. This also happens when the battery reaches an ultra low power state.
If doesn't work, Boot into edl using test point method and flash fastboot rom.
Try this, it worked for me.
First this one
xiaomitips.com/guide/how-to-unbrick-redmi-note-3-snapdragon-best-solution/
If it doesn't work then try this one.
en.miui.com/thread-245347-1-1.html
So I was looking around in TWRP, and foolishly, changed the system partition (changed from ext4 to ext3 I believe)..
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
so; no booting, no splash screen, nothing going on, except the green notification blip when holding hard-reset buttons. I've been searching online and saw some guys using a deep flash cable to short circuit the testing pins, does anyone have experience with this fix?
any help would be appreciated..!
Quince
QuinceDroid said:
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
Click to expand...
Click to collapse
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
jwoegerbauer said:
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
Click to expand...
Click to collapse
I am aware of that, however, my PC doesn't recognize the device when I try to enter EDL mode (Yes, i have installed the qualcomm USB drivers, QDloader, QPST, adb drivers etc)
I fixed it eventually with a Deep Flash cable [EDL] ! It was the only way to trigger the EDL mode. It's aliiive!!