my note 3 pro is bricked
i can go into fastboot, but my devices shown as "Qualcomm HS-USB Diagnostics 900E"
the thing is everytime i connect my note 3 when fastboot to my laptop and run adb tricks to go to edl
my devices isnt showing as it said
"<waiting for devices>"
i found some words about using QPST to update Qualcomm 900E to 9008 but i didnt find proper tutorials and tools needed
anyone can gave me advice on QPST tricks and tools
Deep flash cable
You have to make "Deep flash cable" Search un google
Related
I think i bricked my phone (Samsung Galaxy Express 2) i think it's a soft-brick. i can't turn my device on or enter recovery or download mode, but my computer recognises my device as Quadcomm HS-USB QDLoader 9008. I've been searching the web for ages and i can't find anything. i hope someone can help me unbrick my phone.
the phone dont boot no recovery mode no download mode. and when connect it to pc shows this
Qualcomm HS-USB QDLoader 9008.
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-fix-totally-dead-redmi-note-4-t3746465/page1
Hope it helps you
Sent from my mido using XDA Labs
Ninman20 said:
My Redmi Note 4 is hard bricked...:crying:
I unlocked the bootloader the official way and was trying to flash lineageos on it. I failed :crying:
I cant go into Fastboot mode or Recovery. The Phone wont turn on. I get the Red LED light, when i connect it with the computer.
I bought a Deep Flash Cable and connected my phone with unplugged battery. In device manager under ports i got
qualcomm hs-usb diagnostics 900e. But under MIFlash tool there was no com port. So i changed the driver of the
qualcomm hs-usb diagnostics 900e to qualcomm hs-usb qdloader 9008 (com10) and i got com10 in miflash. If i try to flash the fastboot rom (stable) i get this error: sahara read end error eith status:9. :crying:
I hope someone can help me?
Ninman20
Click to expand...
Click to collapse
1. Remove the back panel then the battery connector. Keep it in that way for a while like a minute
2. Then short either the 'most effective points' or 'less effective points' following this thread . While keeping them short, connect the USB cable to the Computer, it will enter into 'download' mode suitable for miFlash/QFIL
Downgrade from Pie to Oreo Failed.
Tried flash persist.img from unzipped official .tga file then my pocophone stuck in boot animation.
How to enter Qualcomm HS-USB QDLoader 9008 Download Mode? I heard that Qualcomm devices can enter 9008 mode by short circuit 2 points on the mother board . But no more information about this model.
I have already take apart my poco: picture
So I was looking around in TWRP, and foolishly, changed the system partition (changed from ext4 to ext3 I believe)..
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
so; no booting, no splash screen, nothing going on, except the green notification blip when holding hard-reset buttons. I've been searching online and saw some guys using a deep flash cable to short circuit the testing pins, does anyone have experience with this fix?
any help would be appreciated..!
Quince
QuinceDroid said:
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
Click to expand...
Click to collapse
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
jwoegerbauer said:
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
Click to expand...
Click to collapse
I am aware of that, however, my PC doesn't recognize the device when I try to enter EDL mode (Yes, i have installed the qualcomm USB drivers, QDloader, QPST, adb drivers etc)
I fixed it eventually with a Deep Flash cable [EDL] ! It was the only way to trigger the EDL mode. It's aliiive!!