I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
me too, how to fix it please help
mortal786 said:
I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
Click to expand...
Click to collapse
Try Downloading the Firmware and Flash it via QFiL or QPST
I hope this works
Related
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
soulfreem said:
Hello i have a huge problem with my k920 no boot no screen only blue led light when i connect the usb.In device manager is found as qualcomm hs-usb diagnostics 9006 (com13) everytime i connect it so is not discovered by emmc software.Is there any way i can fix it?bring it back to get the windows recognise it as hs-usb qdloader 9008 so i can flash new rom?
Click to expand...
Click to collapse
Did you solve this problem? I have the same
Enter EDL Mode With K920
For Entering in EDL (Emergency Download Mode) In K920 ,
First try turn off your phone completely
then press Volume + and open your QFIL Program and connect usb cable to this (in this mode recognize as 9008 mode)
then you can flash it
but i flashed all rom that i know and still errors continues,
anyone know how can i Format my phone (Brush it from all previous things install on phones) ?
Enter testing, factory mode, power button+volume down. Wipe data, erase sd card, factory reset.
Same problem here.. Tried to flash with wrong model TWRP
Not only Blue light
K920
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
il183690 said:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
Click to expand...
Click to collapse
This works for people who are able to get to fastboot. I am not able to get to fastboot at all. Only EDL. Please help. Any other alternative?
Can you please check this thread.
I hope this helps.
You remind me of myself
I did the same thing in April and had to go to service center as i couldnt make it work that time, they fixed it within 24hours
But now there are lots of recovery methods that u could try
Zed4u said:
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
Click to expand...
Click to collapse
Try deep flash methode, just need to buy deep flash cable in market. For the guidance, please try to googling it in miui forum due to already available there.
Yesterday, one of my friend succesfull to restore her kenzo from diagnostic mode and really happy with the result.
Try the simple deep flash method mentioned here -
http://en.miui.com/thread-310325-1-1.html
I was able to recover my rn3 from 900e mode using this.
It's very simple and easy. You just need a copper wire strand to do it.
Use Deep Flash Method
I had the exact same problem so I tried deep flash method. It worked and my phone was detected by the PC as 9008. Then I could flash the fastboot rom using Miflash tool. Hope this helps.
i've deleted the system partiton when i try to flash cm14 in safestrap twrp.
so i downloaded the stock rom, rename it from *.bin to *.zip in order to install it in the twrp.
and i installed the newest twrp in fastboot mode after unlock sucessfully.
Finally, the black out happened. no pic in any time, only find qualcomm hs-usb qdloader 9008(COM4) when connect to PC make me know it still alive.
As far as I know qualcomm hs-usb qdloader 9008 means Emegercy Download Mode. the I tried some tools such as QFIL and Miflash, but nothing good happen.
It didn't work either when I found the link below
https://forum.xda-developers.com/ki...x-firmware-t3277197/post73262893#post73262893
so who can help my pad back?
thanks for your patience.
Hi. I have a Lenovo TB-X304F that I unlocked and flashed successfully with TWRP, but I screwed up and then managed to brick the device. It now goes to black screen after showing the Lenovo boot image briefly. However I can still access Fastboot and Recovery.
I did backup Boot, Data and System before all this and I have restored these succesfully via TWRP, but the device still won't boot and is stuck on the black screen.
I want to flash stock rom again, and I have downloaded "Lenovo Tab4 A10-TB-X304F_S000038_170703_ROW_QFIL" which is available from some websites, and this is meant to be flashed with QFIL. The problem is that when connecting the tablet, QFIL is always stuck with port "Qualcomm HS-USB Diagnostics 900E (COM21)" which results in the error "Download fail:Switch to EDL fail Failed to switch to Emergency Download mode" when I try to download the firmware. It seems some have solved this issue by modifying a USB cable, but I'm unsure if this would actually help me.
Can anyone help me resolve this, please? Could it be possible to get a TB-X304F backup that perhaps works, when for some reason my backup doesn't? Does somebody have a stock rom that can be flashed using ADB or TWRP?
Very grateful for any help with this. Thanks.
Try using MiFlash not Qfil to flash stock
https://www.xiaomiflash.com/
rhaavin said:
Try using MiFlash not Qfil to flash stock
https://www.xiaomiflash.com/
Click to expand...
Click to collapse
Thanks a lot for your reply! Do you think MiFlash can flash the file that I mentioned above, though (Lenovo Tab4 A10-TB-X304F_S000038_170703_ROW_QFIL)? I believe I was trying out MiFlash as well but it seems it requires another type of file to flash?
deleted
unbrick "dead" tablet Lenovo TB 4 10.1 (X304F/L)
I managed to identify the test point on the motherboard. This allows the tablet to switch from Qualcomm HS-USB Diagnostics 900E driver mode to Qualcom HS-USB QDLoader 9008 mode. My tablet could not be booted into bootloader, recovery or system...
forum.xda-developers.com
Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Click to expand...
Click to collapse
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
Qualcomm HS-USB QDLoader 9008 (COM6)
Click to expand...
Click to collapse
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
jacek-k said:
Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
Click to expand...
Click to collapse
I believed u have hard bricked ur phone. The only solution I can think of is to find someone to flash the stock rom by using MSM download tool. But they usually charge u for a fee for doing that since u need the id and password to access the tool.