Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Click to expand...
Click to collapse
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
Qualcomm HS-USB QDLoader 9008 (COM6)
Click to expand...
Click to collapse
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
jacek-k said:
Device is stuck in EDL mode - screen is black, no response to pressing keys or any combination of keys.
Linux recognizes the device as:
Windows recognizes the device (after installing Qualcomm HS-USB QDLoader 9008) as:
After some searching, I found out I have to reflash firmware with QFIL.
I have downloaded stock firmware: RMX2202export_11_A.17_2021120715030199.ofp.
Next, I have looked around for a step-by-step guide for newbie. For sorry, I hove found nothing helpful.
May I ask some tips how to reflash stock firmware using, QFIL tool and OFP stock firmware?
Or, is there another way to unbrick Realme GT [RMX2202] whitch is stuck in EDL mode?
Click to expand...
Click to collapse
I believed u have hard bricked ur phone. The only solution I can think of is to find someone to flash the stock rom by using MSM download tool. But they usually charge u for a fee for doing that since u need the id and password to access the tool.
Related
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
il183690 said:
There is already topic with 2 methods, http://forum.xda-developers.com/redmi-note-3/how-to/unbricking-redmi-note3-hardbrickhs-usb-t3351325
Click to expand...
Click to collapse
This works for people who are able to get to fastboot. I am not able to get to fastboot at all. Only EDL. Please help. Any other alternative?
Can you please check this thread.
I hope this helps.
You remind me of myself
I did the same thing in April and had to go to service center as i couldnt make it work that time, they fixed it within 24hours
But now there are lots of recovery methods that u could try
Zed4u said:
Hi everyone.. Can someone guide me how to get my phone to be detect back as Qualcomm HS-USB qdloader 9008 instead of this Qualcomm HS-USB Diagnostics 900E.. Actually i was flashing a rom using miflash but since i didnt select flashall below.. i made the mistake of closing the miflash before the flashing was done.. Since then i cant get the mob to be detect as qdloader so it can appear in miflash. The phone right now is still in fastboot. Please is there any way to revive my phone? :crying::crying::crying:
Click to expand...
Click to collapse
Try deep flash methode, just need to buy deep flash cable in market. For the guidance, please try to googling it in miui forum due to already available there.
Yesterday, one of my friend succesfull to restore her kenzo from diagnostic mode and really happy with the result.
Try the simple deep flash method mentioned here -
http://en.miui.com/thread-310325-1-1.html
I was able to recover my rn3 from 900e mode using this.
It's very simple and easy. You just need a copper wire strand to do it.
Use Deep Flash Method
I had the exact same problem so I tried deep flash method. It worked and my phone was detected by the PC as 9008. Then I could flash the fastboot rom using Miflash tool. Hope this helps.
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
Hi. I have a Lenovo TB-X304F that I unlocked and flashed successfully with TWRP, but I screwed up and then managed to brick the device. It now goes to black screen after showing the Lenovo boot image briefly. However I can still access Fastboot and Recovery.
I did backup Boot, Data and System before all this and I have restored these succesfully via TWRP, but the device still won't boot and is stuck on the black screen.
I want to flash stock rom again, and I have downloaded "Lenovo Tab4 A10-TB-X304F_S000038_170703_ROW_QFIL" which is available from some websites, and this is meant to be flashed with QFIL. The problem is that when connecting the tablet, QFIL is always stuck with port "Qualcomm HS-USB Diagnostics 900E (COM21)" which results in the error "Download fail:Switch to EDL fail Failed to switch to Emergency Download mode" when I try to download the firmware. It seems some have solved this issue by modifying a USB cable, but I'm unsure if this would actually help me.
Can anyone help me resolve this, please? Could it be possible to get a TB-X304F backup that perhaps works, when for some reason my backup doesn't? Does somebody have a stock rom that can be flashed using ADB or TWRP?
Very grateful for any help with this. Thanks.
Try using MiFlash not Qfil to flash stock
https://www.xiaomiflash.com/
rhaavin said:
Try using MiFlash not Qfil to flash stock
https://www.xiaomiflash.com/
Click to expand...
Click to collapse
Thanks a lot for your reply! Do you think MiFlash can flash the file that I mentioned above, though (Lenovo Tab4 A10-TB-X304F_S000038_170703_ROW_QFIL)? I believe I was trying out MiFlash as well but it seems it requires another type of file to flash?
deleted
unbrick "dead" tablet Lenovo TB 4 10.1 (X304F/L)
I managed to identify the test point on the motherboard. This allows the tablet to switch from Qualcomm HS-USB Diagnostics 900E driver mode to Qualcom HS-USB QDLoader 9008 mode. My tablet could not be booted into bootloader, recovery or system...
forum.xda-developers.com
My G955U is hard bricked, because i flashed 2 files that failed both. Doesn't turn on, doesn't charge, doesn't go in download mode, but when i plug it in pc with usb i have a port called "Qualcomm HS-USB QDLoader 9008 (COM9)".
I flashed the BL with this "BL_ZERO_FORCE_EDL_G955U.tar" and the AP with this "AP_PCR_G955U_BQL1.tar".
Is there a solution to flashing with something like Qfil?
Sorry my english.
Giosvy said:
My G955U is hard bricked, because i flashed 2 files that failed both. Doesn't turn on, doesn't charge, doesn't go in download mode, but when i plug it in pc with usb i have a port called "Qualcomm HS-USB QDLoader 9008 (COM9)".
I flashed the BL with this "BL_ZERO_FORCE_EDL_G955U.tar" and the AP with this "AP_PCR_G955U_BQL1.tar".
Is there a solution to flashing with something like Qfil?
Sorry my english.
Click to expand...
Click to collapse
You need the edl files and recovery bat for what ever revision bootloader you where on. I don't know if the edl files are the same for + as reg s8. We don't use qfil on s8
TheMadScientist said:
You need the edl files and recovery bat for what ever revision bootloader you where on. I don't know if the edl files are the same for + as reg s8. We don't use qfil on s8
Click to expand...
Click to collapse
is there a step by step guide please. i am also facing the same problem.
kkins95 said:
is there a step by step guide please. i am also facing the same problem.
Click to expand...
Click to collapse
Pretty much any of the root threads that used edl as long as it's the same bootloader revision. Those root guides will also repair bootloader in the process.
I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
me too, how to fix it please help
mortal786 said:
I've tried to wipe user data using QFIL and ended up hard bricking my Vivo Y11 2019. It would fail to boot and enter emergency download (EDL) mode. When connected to a PC, Windows will detect it as Qualcomm HS-USB QDLoader 9008. How can I fix it please need your help.
Click to expand...
Click to collapse
Try Downloading the Firmware and Flash it via QFiL or QPST
I hope this works