i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
update:
i end up fixing my phone. it was in EDL Mode. i had Flash Using DFC Cable or Xiaomi EDL Cable. i made one from an youtube video ( it was one with button i made, it allow to get get QDLoader 9008 with consistency and without removing the back cover.)
afterthat i just flash it miflash tool with "kenzo_global_images_8.11.22_20181122.0000.00_6.0_global " it had to be DEVELOPER VERSION thought. i dont know if i can do it a second time because it might be a flute that it was able to flash at all LOL. and this is the only phone i have and i dont want to use an Iphone7. one thing i dont like is it wont let me flash twrp or OrangeFox- ( it said it can not found file flash_all.bat) cause when went push vol up + power it just give me standard xiami menu.
when i have a compatible phone on the same cell network, i'll try to flashing a diff rom cause the xiami rom has lots of ads. .
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial https://www.youtube.com/watch?v=xExKvog5RP4
LoadOP2 said:
I think you have locked your bootloader. Well if that is the case try flashing TWRP again it will solve your problem.
Refer to this tutorial watch?v=xExKvog5RP4[/url]
Click to expand...
Click to collapse
from you tube
tried it, didnt work. it said flash success. but the phone will not power on. VOL up +power not working, vol down + power not working either
Bluesaky said:
i wanted flash my phone so i follow this guild on youtube.
/watch?v=naQX9Was6DY
after flashing it got red light. it was fine before. i try the vol down +power and volume up and down + power but nothing works.
the computer recognize it as "Qualcomm HS-USB Diagnostics 900E"
i manage to get it to display " Qualcomm HS-USB QDLoader 9008" but dont know how to proceed from here.
Specs Before Dead:
Miui 7.012
Android 5.6
32 Gb Rom,3 Gb Ram (kenzo)
please help
Click to expand...
Click to collapse
Are you able to boot your device into EDL mode? If not, try to boot into EDL using the test point method if default method doesn't work. If you're successful in booting up in EDL, Follow the below forum to recover the bootloader and recovery.
Link to the test point method tutorial: https://www.youtube.com/watch?v=_jv1ZVQ95Ng
Follow this after you enter the EDL mode successfully: https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Try going to Fastboot Mode using Power Button and Vol Down. If you can go to Fastboot, then I'm pretty sure you'll be able to go to EDL Mode. Just look up online how to go to EDL Mode from Fastboot. I think the command to be typed in the cmd window is 'fastboot reboot edl'.
If that works, and you have your Qualcomm drivers installed, you should be able to flash a Fastboot ROM using Mi Flash Tools.
Cheers!
[email protected] said:
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Click to expand...
Click to collapse
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
manakmishra said:
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
Click to expand...
Click to collapse
Open kenzo a.k.a. redmi note 3 disconnect battery
Then connect USB just to mobile not to PC
Then connect battery don't press any button
Connect USB to PC while pressing volume up button
Start mi flash tool click on refresh button see if it detects.
Start flash
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Simply do this : https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Then flash latest global dev rom in Miflash (refresh when phone isn't detected http://en.miui.com/a-234.html
since you can't boot, it might be worth your time to take a look at this.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
It's a tutorial to make a 'deep-flash' cable using a micro usb cable that will force your device into fastboot mode, much like samsung's USB jig.
If that works, then you can try following this tutorial :
http://en.miui.com/thread-235865-1-1.html
You can use the link given in post #6 to boot to edl, then flash a stock MIUI ROM using MiFlash.
If all else fails, it might be time to consider taking it to the Mi service centre.
SOLVED
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
vol - and power button press and try to enter in to fastboot...
A Q R I N said:
My redmi note 3 pro ( snapdragon ) hard bricked when I use a backup from TWRP.
When I plugged in the usb into my pc , there is a sound and blinking red light appeared.
In Device Manager , it is detected as "QHSUSB_BULK" with a error sign.
(The drivers for this device are not installed. (Code 28) )
I hope can help me :crying:
Click to expand...
Click to collapse
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
https://www.youtube.com/watch?v=KzNTxRVF0pI skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
android_smater said:
you phone is in edl mode
try to press and hold power button it will reboot in 10 sec
or flash the fastboot rom
link skip all thing and strat from flashing rom part in video
and iot not hard brick it soft brick or it enter into edl automatically
Click to expand...
Click to collapse
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
"[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS" link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking and not detected in MiFlash
Rajat22 said:
vol - and power button press and try to enter in to fastboot...
Click to expand...
Click to collapse
Nothing happened when I press the vol ( - ) button with power button.
Tried to turn on the phone by pressing the power button only and phone is not booting
A Q R I N said:
UPDATE : I updated "QHSUSB_BULK" device to "Qualcomm HS-USB Loader 9008" and my phone is detected in MiFlash according to the guide
[Tools, Tips & Tutorials] [DEVICE TEAM] Flash (Unbrick) Redmi Note 3(SD) with Locked Bootloader - All ROMS link : en(dot)miui(dot)com/thread-235865-1-1(dot)html
UPDATE : Before I got to the flash part , Device Manager detected my device as "Unknown USB Device ( Device Descriptor Failed )" instead of "Qualcomm HS-USB Loader 9008"
Tried another 2 perfectly fine USB cable with another PC and still the same.
The red light is still blinking
Click to expand...
Click to collapse
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
android_smater said:
Yes it show like that in device manager but in mi flash tool it show like "COM123" like that...
And if you flash the fastboot rom plz cheack thw option inside to save your data
Or try to reboot your phone by pressing power button only for 10 sec
Or vol - and power button to boot into fastboot
Click to expand...
Click to collapse
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
A Q R I N said:
So the fastboot for kenzo is called "kenzo_global_images_V8.2.4.0.MHOMIDL_20170522.0000.00_6.0_global_0cc0f93a7c.tgz" from en(dot)miui(dot)com/a-234(dot)html
Am I right?
Click to expand...
Click to collapse
Yes
---------- Post added at 04:09 AM ---------- Previous post was at 03:51 AM ----------
http://bigota.d.miui.com/V8.0.1.0.L...DG_20160805.0000.29_5.1_global_5e65360aff.tgz
Direct link
SOLVED Thanks guys !!!
A Q R I N said:
Finally! my phone detected in MiFlash also in Device Manager as "Qualcomm HS-USB QDLoader 9008"
Click to expand...
Click to collapse
Please can you provide me the link to download the driver!
Hi.
1. I bricked my device many, many times. But never so hard. This time I can't revive it.
2. Yes, I checked every solutions, guides etc. Actually there are two guides, rest are only variations.
3. Yes, I tried many times every solution, tried to push other combinations with buttons, tried open computer apps as a supervisor and a normal user. For nothing.
What is the problem?
X820 is completely blind and deaf. I turned it off (force, power button) during the boot animation.
No ROM, no TWRP, no fastboot and - important - no diode (blue, red - whatever). Completely bricked.
After USB connecting my PC sees it as a Qualcomm HS-USB QDLoader 9008 (COM4).
That's it.
I tried yesterday and today many guides. I red:
https://forum.xda-developers.com/le-max-2/help/help-bricked-phone-t3707045
https://forum.xda-developers.com/le-2/how-to/repair-hard-bricked-phone-x52x-sd-t3648348
https://forum.xda-developers.com/le...k-fix-files-qfil-le-max-2-x820-t3423668/page2
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
and few instructions from YouTube.
If the only way is FlashOne (version 1.9), every time I had a similar result: error after unzip (I tried 4 other ROMs). Problem with finding this or that file, but everytime problem in the same moment.
I tried turn off the device by: power button, power + Vol- and turn it on by: power, power + Vol+, power + Vol+ + Vol- (both). No difference (actually I heard if my device is on or off).
I really need working my own X820.
And I offer 25 euro if You can help me "step by step".
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
AhmadSant said:
can you enter Qfile mode (Qualcomm HS-USB QDLoader 9008 (COM4))?
if yes, you need to check again with the FLASHONE program and the files of FlashOne (version 1.9), I remember there was version 1.8
Click to expand...
Click to collapse
Hi.
What do You mean "enter Qfile mode"?
When I connect the phone to PC with cable, PC usually sees my device as Qualcomm HS-USB QDLoader 9008 (COM4).
Sometimes as an unknown device. But nothing more.
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
if your pc detects your phone as Qualcomm HS-USB QDLoader, then it is okay , it is just problem of the flashOne and recovery rom that u are using. Please check again.
pm me
i can slove this problem
pranjalm said:
Try this if pc detects your phone as Qualcomm HS-USB QDLoader https://drive.google.com/file/d/0B8In_WJch-UvQ3RtOGstbXdqUWs/view?usp=drivesdk
https://drive.google.com/file/d/0B8In_WJch-Uvb0xBbnBtbTlISDg/view?usp=drivesdk
If drivers error , install drivers manually
Click to expand...
Click to collapse
Thanks, but I tried FlashOne at least 10 times. 4 other ROMs and I always had some error after unzip.
Maybe you should try a different laptop. The method should work. Are you referring to "unzip error" as an error in flashone or are you trying to unzip the qfil file? Be more specific if it's flashone error.
Hey try this its for le2 but the process is similar
youtube.com/watch?v=iN9Ce3hKlRA
you can also try QPST and Mi flashtool
Hi again.
After few hours on other PC: failed.
I tried:
- two other drivers packs,
- FlashOne 1.9 (I didn't find 1.8 and 2.0 didn't work),
- four other ROMs (Qfil), probably 2 other (and 4 different names).
FlashOne opened as a supervisor and normal.
And I had always errors like this:
17:40:41: ERROR: function: sahara_rx_data:194 Unable to read packet header. Only read 0 bytes.
17:40:41: ERROR: function: sahara_main:854 Sahara protocol error
17:40:41: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
So still nothing.
Do You have other ideas?
https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
Try what the guys on the first page are suggesting, it might work. Also download the qfil that it's mentioned in the unbrick post in guides section, I should have uploaded it on mega and drive. That's 14s. The name should be without space when you save it, e.g.: Qfil_14s_Le_Max2.
You should not give up as you're on the right track. Phone is seen as Qualcomm 9008 (COM...). Try a different cable, different USB ports, a different computer again, maybe one with USB 2.0.
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
adityatiple said:
Even I experienced dsame problem but was able to revive my le max 2 by below mentioned guide.
Few important tips-
1. Place flash one in C drive
2. Press vol up, vol down & power button simultaneously before connecting d phone to PC.
3. Even if download fails, try 3-4 times & u vl succeed.
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
All d best
MoRiA Cheo said:
Thanks.
After 3 days it is time to stop.
No success.
2 PCs, 3 cables, 5 USB ports, dozens tries. And nothing.
Now I have to check somehow if the motherboard is OK.
For now thank You all. The best phone I ever had still dead.
Click to expand...
Click to collapse
I wish u all d best
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
This is silly but maybe it helps... I had problems trying to flash my phone and the problem was the computer it was a 32bit computer so i switched to a 64bit one and it worked like a charm. Good luck
dylanmusik said:
can you enter recovery mode?i have brick my x820 can repair using adb in recorvery
Click to expand...
Click to collapse
No.
Nothing.
Absolutely none of lights on screen. And no LED.
It looks like dead. Only PC sees its as a Qualcomm... etc.
So I was looking around in TWRP, and foolishly, changed the system partition (changed from ext4 to ext3 I believe)..
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
so; no booting, no splash screen, nothing going on, except the green notification blip when holding hard-reset buttons. I've been searching online and saw some guys using a deep flash cable to short circuit the testing pins, does anyone have experience with this fix?
any help would be appreciated..!
Quince
QuinceDroid said:
Power and VOL- shows the EDM - green notification LED - though my PC doesn't recognize HS-USB QDLoader 9008 .
Click to expand...
Click to collapse
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
jwoegerbauer said:
The Qualcomm QDLoader Driver only is detecting the device when the phone is connected to PC in EDL Mode or Download Mode.
How to boot into EDL Mode on Qualcomm based Android phones is described here.
Click to expand...
Click to collapse
I am aware of that, however, my PC doesn't recognize the device when I try to enter EDL mode (Yes, i have installed the qualcomm USB drivers, QDloader, QPST, adb drivers etc)
I fixed it eventually with a Deep Flash cable [EDL] ! It was the only way to trigger the EDL mode. It's aliiive!!