My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.
Related
Hi,
i have problem with my Novo 7 Paladin. One week ago i installed Google Maps update. After that my tablet was very strange. Sometimes when it go to sleep it won't wake up. I had to press power on again. Later that week there was some graphical glitch on screen (blinking colors). And now i can't boot at all. So i tried the SD card method to recover system. The problem is that i can't boot. Combination of keys like VOL+ and POWER or VOL+ and RESET doesn't work. Then i tried the original USB Boot Tool from Ainol. This tool doesn't work either.
USB Boot Tool
1) install correct USB drivers (press VOL+ and plug USB)
select drivers from tool/drivers/4770
2) unplug USB and start USBBootTool.exe
3) press VOL- and plug USB
4) it says BOOT... please waite0% (attachment boottool.JPG)
5) after some time of waiting the error apears (attachment boottool2.JPG)
Can someone help me please?
Great, so I can throw it away!
ErrorTM said:
Great, so I can throw it away!
Click to expand...
Click to collapse
First try to recharge it overnight, then push power button and see what happens. Anything shown on the screen?
lenik said:
First try to recharge it overnight, then push power button and see what happens. Anything shown on the screen?
Click to expand...
Click to collapse
Tested, same result.
when you connect your tablet to the PC, do you see any devices appear/disappear?
if you use linux, try lsmod (LSMOD lowercase) to see if your tablet shows on the list.
lenik said:
when you connect your tablet to the PC, do you see any devices appear/disappear?
if you use linux, try lsmod (LSMOD lowercase) to see if your tablet shows on the list.
Click to expand...
Click to collapse
I'm using Windows XP. Yes it appears in devices and install drivers.
ErrorTM said:
I'm using Windows XP. Yes it appears in devices and install drivers.
Click to expand...
Click to collapse
If it appears in devices, it's not completely dead. I don't have enough windows experience, but other people had occasional success installing correct drivers and reflashing the device using Ingenic USB Boot Tool or something like that. If the reflash process does not start, most probably it's because you have installed incorrect drivers.
lenik said:
If it appears in devices, it's not completely dead. I don't have enough windows experience, but other people had occasional success installing correct drivers and reflashing the device using Ingenic USB Boot Tool or something like that. If the reflash process does not start, most probably it's because you have installed incorrect drivers.
Click to expand...
Click to collapse
I am willing to install Linux if you think it could help.
I found xburst-tools, which i think is for flash my tablet. I used Ubuntu live distribution. Problem is that i cant even install prerequisities like libconfuse0. I dont know how to install it. Sorry im newbie in linux.
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks
flashtool error image attached
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Hi everyone, i ask for your help cause i have a common problem but the fixes i found in the forum didn't work for me: my ZenFone 5 stucks at "Asus" logo with a "loading loop" wheel below that.
I know this post may be long but i beg you to read all steps:
1) Phone stucks at logo, but could enter recovery (pressing vol + down), i've updated it via external SD card (official firmware but didn't work) then i've wiped data and did a factory reset. Phone still stucks at logo.
2) Now i can't even enter recovery mode... when pressing vol + down it shows 2 options but whatever i choose the phone reboots. If i press vol + up it says "CSC mode, long press power to restart. Phone still stucks.
3) Now (after some time) the phone's screen doesn't show anything, nor charging icon or notification led when recharging, but strangely the computer recognizes it as a device when connected via USB cable, and the led turns on when i do this.
A friend told me to follow a guide that says to install "Intel Soc USB driver", i did that. After installing, when connecting the device, 2 things should pop up in Device Mangager under "Intel Soc": CloverviewPlus Device and Intel Soc USB Driver... but the second one doesn't show to me
I've also tried Asus flashtool guide... at step 4 it says to click in the box icon and choose the firmware RAW file, so i've downloaded a raw firmware for the ZenFone 5, but oddly it doesn't let me choose any raw file.
Note: the phone is recognized by the pc as "QHSUSB_BULK", so i've tried to update its driver with qualcomm drivers, and now it's recognized as "Qualcom MMC Usb storage device". But i think i've did a wrong thing cause my friend told me i should have choosed some kind of official driver
Thanks in advance for your help
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html
hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
borda01 said:
hi,
As is thred name - can't go to download mode - after connecting to PC phone is bootlooping into system
Help
Click to expand...
Click to collapse
What do you want to do?
Flash rom inne flash tool
borda01 said:
Flash rom inne flash tool
Click to expand...
Click to collapse
Your phone is not powering down ?
Lenovo P780 is flashed by powering down.
You power down the phone, prepare to flash and when you are ready just plug the USB cable with the phone powered down.
That is it.
That not works, phone is powered down, but after connecting cable is powering on into system...
borda01 said:
That not works, phone is powered down, but after connecting cable is powering on into system...
Click to expand...
Click to collapse
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
stympy said:
Try this:
When the procedure to flash is ready, with the USB cable connected press the red button and keep the button pressed, then press download in SP Flash Tool and release the button. Do all this in this order. Tell me what is going on?
The flash should start.
Click to expand...
Click to collapse
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
borda01 said:
Phone is booting, sp flash tool "searching"
Phone has TWRP installed, but I can't install any ROM - error appears
Click to expand...
Click to collapse
What firmware do you have installed now?
stympy said:
what firmware do you have installed now?
Click to expand...
Click to collapse
(vibeui_v2.0_1443_7.25.1_st)
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
EDIT:
solution:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Click to expand...
Click to collapse
borda01 said:
In device manager phone is detected as MT65XX preloader in about 5 seconds - after that it bootloops.
Click to expand...
Click to collapse
I understand now. Your computer does not recognize your phone. The drivers are not installed at all or correctly.
Download the drivers from here and install them. The drivers are at the bottom of the page.
To flash use only the sp flash tools from here.
Small tutorial to install the drivers:
I think was someting like this:
1. First install the .exe file. Reboot PC.
2. Now plug the phone to the PC and new hardware wizard will appear. Unplug the USB cable.
3. Now power off the phone.
4. Again plug the phone this time powered off.
5. At this time in Device Manager appears for a second or two not in USB area, in ports area something with.. MTK65xx...
6. Click very fast on it because that will dessapear fast.
7. After you clicked on it all you have to do is update driver, and voila you have drivers installed and now all you have to do is to flash you ROM.
Hope this will help you.
Good luck.
What is a newest version of TWRP for P780?
borda01 said:
What is a newest version of TWRP for P780?
Click to expand...
Click to collapse
For normal layout is TWRP 2.8.4.0 rev.2 and for + layout is 3.0.2-7.