Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html
Related
Im trying to unlock Sony xperia sola rite now.... it wont stay on fastboot mode ( volume up + plug usb) when i press volume up, the light strip turns blue for a second or two, but then goes into charging while shutdown mode... I chek *#*#7378423#*#* -- Service info > Configuration > Rooting Status it says - YES// I try USB debugging ON and OFF... I try to stay on fastboot with my home pc windows 7 and my notebook windows vista..Battery 95-100% charged... What i do wrong?
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
xbeda said:
Do you have installed drivers properly?
Try reinstall drivers and try different USB port.
Click to expand...
Click to collapse
how can i install drivers without connecting device?
I solved the problem)
1) Open device manager in windows
2) Connect usb cable to your phone pushing vol up button
3) Device manager will show you fastboot device for 2-3 sec (before the phone go to charge mode) Right click on fastboot device and install drivers from C:\Android\sdk\extras\google\usb_driver
4) Reconnect usb cable pushing volup button
I have the same problem but I dont know if cuz my PC is way too slow. I dont even have a chance for it to show up But I know it connected cuz of the alert sound.
---------- Post added at 08:50 AM ---------- Previous post was at 08:27 AM ----------
Haha I solved my problem by installing the driver in safe mode. Things went much quicker here )
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Do you know u are GENIUS !!!
i have been trying to get my phone in fast boot mode for the last 3 weeks then then i changed the "System Varibales" in my Windows & ( 64Bit) and then tried your above method AND ... volaaaa it works ... in a flash it works then the pone is in Fastboot mode .
( Device : Sony Xperia Sola 2012 without upgrade to .654)
Don't call me the genius, I found the solution using google
I just wrote a quick summary of it.
Nerre said:
I just wrote a quick summary of it.
Click to expand...
Click to collapse
...which was enormously helpful. Thanks!! (Can't push the thanks button as I don't have enough posts yet.
BTW, I used the method with the Xperia Go, so obviously the method is not limited to a particular model.
It works
Really helpful!
Hey
I can't even know where will the fastboot device appear to change driver. What can I do? My sola goes in charge mode very quickly I plugged my usb cable in almost 100 times and tried everything.
Okay, I'm totally lost. When I hold volume down button "s1boot download" appers in device manager, but it can't install a proper driver. I know I need s1boot fastboot and hold volume up button but it doesn't appears. Only the portable device with an H:/ partition
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
ricstc said:
Make sure phone is OFF
While plugging in the USB cable, hold and keep holding the UP VOLUME key
You will hear a system sound played
Do all these while you have Device Manager on screen
Exclamation mark appears on the ADB driver icon
Chose the option to look for the driver in your hard disk - point to where the drivers are.
If using Win8 then you need to disable signing of drivers first (search on net how to)
So far you managed to do this or not?
Click to expand...
Click to collapse
Hey, nothing is working for me. I did the steps above, but with no chance to install any driver. At the driver manager, the s1boot fastboot-thing is showing up for some seconds and then disappear. i can't change the driver or install the new one.
Any suggestions? I want to change to cm9 so much, because the stock rom really sucks...it is slow and buggy
Edit: I found this post http://forum.xda-developers.com/showthread.php?t=1554632 and it works for me!!!
Edit 2: It seems, that you have to do this steps everytime you flash the boot.img to the phone.
I did everything. I installed the driver but when I hold volume up while plug in usb, the led does not turn to BLUE. It turns pink or purple, some kind of colour. What should I do guys? I've gone mad.
Thanks
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
---------- Post added at 06:32 PM ---------- Previous post was at 06:10 PM ----------
srivmanu said:
Thanks a ton!!!
i wasted my whole day trying it!
just hit this thread!!
will reply if it works!
Click to expand...
Click to collapse
Does't work!!
help someone??:crying::crying:
Doesnt work for me either. I tried everything for hours, but i only see a purple LED for a few seconds and then the phone mode changes into charging.
All drivers are installed.
Flashtool doesnt recognize the Sola either.
Is there a way to flash a recovery without having the Sola bootloader unlocked?
Greetings
still no fastboot
device manager opened
phone off, holding vol. up plugging in usb
NOTHING happens on computer no sound, device manager doesn't refreshes, no purple led on the phone, just enters charging quickly
tried another usb port
tried to enter fastboot from flashtool,
tried to enter with command adb reboot bootloader / adb reboot fastboot
NOTHING happens just reboots normally
So I don't have a clue what's going on there, may the fastboot disappeard or broken?
BUT I used the fastboot for a couple weeks ago in this computer in this usb port, since that I tried some rom does it matter?
BL Locked
Win7 x64
pl explain in detail
Nerre said:
The solution that worked for me was:
Keep the Device Manager open
Connect the phone and quickly choose to change driver
Disconnect the phone again (because it goes into normal mode)
Choose to install a driver from the computer, choose "All devices" and "have disk".
Browse to the folder with the .inf
Now, before clicking Next, connect the phone again and quickly hit Next.
I think it took me two hours of googling and trial before I could finally get a custom ROM installed...
Click to expand...
Click to collapse
pl explain in detail.im a novice and i want to update to ICS in ma Sola....but fastboot driver installtion failed in my W 7 (64 bit):crying::crying::crying:
Solution
For those who still dont get it to work by "Nerre's" method.
The procedure will be same. You have to download latest android_winusb.inf file. I couldnt get it to work bcz of this. I was using the file from sony site. It was giving me some certificate error. Then I used the lates file downloaded from sdk kit. Then this procedure worked.
Make sure to choose "Android Boot loader Interface" after you select ...winusb.inf file. Then before clicking next, reconnect your device in fastboot mode.
Hope this helps someone.
Hi,
I have on my tf201 latest official firmware, 4.1.1 build-number: JRO03C.WW_epad-10.4.2.18-20121122.
As Asus doesn't provide any more updates for our device and mine is out of warranty I'm finally ready to move on to some custom roms.
My tablet is Rooted.
Now after a lot of reading I thought it would be wise to do a backup of everything and make my device unbrickable.
I started to follow the instructions on this site : matthill.eu/android/transformer-prime-tf201-jellybean-nvflash
At first I backed everything up with Titanium Backup and then I did a factory reinstall, so I would have a clean tablet to start.
Then I installed the unlocking tool and succesfully unlocked my device.
I restarted my tf201 with holding the volume button down to get the options to enter fastboot.
When I got to the selection menu, I press the volume button a few times to select the USB-icon.
Then I press the volume up button to enter fastboot, but nothing happens. It just freeze.
The only thing I can do is hold the power button until my tablet restarts.
Also, since i'm on JB I never could connect it on my pc anymore. It even doesn't show up as an unknown device.
So when I want to use ADB I have to use ADB Konnect (wireless ADB).
JNiels1980 said:
Hi,
I have on my tf201 latest official firmware, 4.1.1 build-number: JRO03C.WW_epad-10.4.2.18-20121122.
As Asus doesn't provide any more updates for our device and mine is out of warranty I'm finally ready to move on to some custom roms.
My tablet is Rooted.
Now after a lot of reading I thought it would be wise to do a backup of everything and make my device unbrickable.
I started to follow the instructions on this site : matthill.eu/android/transformer-prime-tf201-jellybean-nvflash
At first I backed everything up with Titanium Backup and then I did a factory reinstall, so I would have a clean tablet to start.
Then I installed the unlocking tool and succesfully unlocked my device.
I restarted my tf201 with holding the volume button down to get the options to enter fastboot.
When I got to the selection menu, I press the volume button a few times to select the USB-icon.
Then I press the volume up button to enter fastboot, but nothing happens. It just freeze.
The only thing I can do is hold the power button until my tablet restarts.
Also, since i'm on JB I never could connect it on my pc anymore. It even doesn't show up as an unknown device.
So when I want to use ADB I have to use ADB Konnect (wireless ADB).
Click to expand...
Click to collapse
When you press up on the USB icon and it freezes that it normal.. This is fastboot mode.
You now must access it over a PC after installing the naked drivers.. If it is not showing on your PC then either try a different PC or your cable is faulty.
Thanks for the quick reply.
I tried once more to enter fastboot. Same result.
But when I disconnected my usb cable to connect it to an other computer, suddenly I got this message on my tablet:
"Starting Fastboot USB download protocol"
This message didn't show up before.
I plugged the tablet back to my pc, but still no device detection in device manager, even when refreshing (So I can't install naked drivers, as it is not recognized).
My computer is a Windows 8.1 system.
I restarted my tablet again, (after disconnecting it from my pc) and followed the procedure to enter Fastboot again.
I waited for the message "Starting Fastboot ..." and then I connected the cable to my other pc (Windows 7 system)
Same result as on the Windows 8.1 machine, not recognized
You say it could be that my cable is broken. Maybe, but it's a strange coincidence that this happened when switching from ICS to JB.
I know JB for the tf201 is been out a long time, and I updated since I could. So over time, maybe my cable could be broken now. But I'm sure I had this problem (not recognizing) since then, because right after updating I wanted to do some things with ADB and so I found out I had this problem.
Hi there,
yesterday I tried to root my new Tablet Z (16GB, LTE, Model: SGP321, Firmware: 10.4.B.0.569) and it doesn't start since then.
I used an ubuntu live CD for all these tasks because fastboot doesn't work on my win 8.1 and my debian wheezy didn't have the libc-dev needed in its repositories (didn't want to mess with packets that weren't yet integrated into my OS).
What I did:
unlock the bootloader according to http://unlockbootloader.sonymobile.com/instructions
I followed the instructions here: http://forum.xda-developers.com/xperia-z/general/how-to-root-10-4-b-0-569-t2590781
a few annotations to this:
the firmware rar didn't include a "Recover.zip", so I used the boot.img directly inside the firmware rar
although sony and this CM tutorial use the "-i" parameter of fastboot, I didn't use it because it wasn't used by the tutorial
after I did the "fastboot reboot" step, the device wasn't listed anymore when typing "fastboot devices", which, I think, is okay since the device should restart then.
I think it didn't really restart, because the LED on the side glew red.
I tried to turn on the tablet but it didn't do anything (the LED kept glowing red).
I tried holding vol up and power for a few seconds (until the LED blinked first once and then three times) but the tablet wouldn't do anything except for the LED glowing red. at somepoint, the LED would turn off (I think that happened when I hold vol up and power for more than 10 sec).
I was able to let it glow red again by pressing vol up and power again and release the vol up button before the power button.
I also tried to use the PC companion on my windows machine to repair the tablet but the tablet wasn't even recognized (either using the fastboot-procedure by holding vol up while connecting the tablet nor normal plugging in...)
any ideas what I could do next?
Same Problem!
Hey wullxz!
I have the same problem. Red LED most of the time, and I cannot make ANY USB connection to the PC. The tablet won't show up in the device manager. So obviously cant use flashtool, nor PC companion. Ive tried all this volume up and down button stuff, but simply cannot get it to show up on the computer.. Tried a different USB cable as well.. Same issue. The USB port is definitely not broken. Its brand new..
Have you found any solution ? Or anyone else? Mine just got back from Sony Repair.. they wont fix it cuz they detected that Ive tampered with the original software.... meaning Warranty Lost!
Great!
hi,
i also sent mine to sony for a repair. i wrote that i did a firmware update and the tablet wouldn't boot afterwards.
i didn't try the bootloader-unlock again afterwards.
Help Needed!
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Oki
wullxz said:
i think you should open a new thread for your problem because it seems like it's not really similar to my issue.
you should get more/better replies in an own thread.
Click to expand...
Click to collapse
Oki thnx, will try that!
centinel_x said:
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet, everything normal...
2) Charge my tablet
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
Click to expand...
Click to collapse
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Rootk1t said:
let it charge to 100%, check for flashmode drivers installed and then try attaching it to pc only when flashtool asks you to do it.
Click to expand...
Click to collapse
Hey thanks for your reply... It wont go into flashmode... Theres something fundamentally wrong.. I cant figure out what... I leave it plugged in for 48 hours..but it doesnt really get full.. the most Ill get the orange LED.. like 50%... now its on since about 12 hours.. no LED on at all... strange..
But yea.. no flashmode... Nothing showing up when connecting the USB cable... nothing in device manager..and therefore flashtool sees nothing!
SOLVED
Problem solved! I can't believe it. Two bad(?) USB cables. Bought a new one, charges fine, flashmode fine. Flashed stock ROM.
However the Camera still doesn't work. Maybe the problem of the cable inside which may have come loose!
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
EDIT: i no longer require help with this phone, as far as i'm concerned this thread is now dead and im moving on to flashing via ADB
*BUMP* :angel:
blood angte said:
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
Click to expand...
Click to collapse
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
kishore4 said:
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
Click to expand...
Click to collapse
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Maybe JTAG would be your best bet.
blood angte said:
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Click to expand...
Click to collapse
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
*Closed until further notice*
dyczone said:
Maybe JTAG would be your best bet.
Click to expand...
Click to collapse
yeah i was hoping it would not come down to that... If it is my only option i guess i will find someplace that can do it for me. cause i dont have the hardware to do such a thing none the less even figure out how to do it. other than that i think i might just retire this phone until something else comes up.
Thanks to all the peeps who replied giving info, much kudo's to you guys. :good:
kishore4 said:
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
so i tried the driver pack and it did indeed find the correct driver for my phone although KDZ still wont detect my phone... bummer :crying:
kishore4 said:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
blood angte said:
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
Click to expand...
Click to collapse
hey..can you get into recovery or your phone is just dead?
well there are two modes for the device :-
1. power off the the phone and then press volume up and plug in the usb cable while doing that -download mode
2. power off the phone and then press power+ volume up button together and quickly plug in the usb the phone goes into emergency mode
try them both
also check in windows manager if any of the LG modems are active..if thats the case then disable them by right click option and then try KDZ updater and see if it works..if not repeat the points 1 and 2 and shake the life out of your device till it gives up and gets detected haha..also try taking battery off and then putting it back and plugging in usb then only.
and about adb i am not sure if it will work but you can always check if the device is being detected by adb using following command :-
adb devices
P.S. -
check in windows device manager the hardware vendor id of the device and then verify if you have it listed in C:\Users\(your username on pc)\.android\adb_usb.ini
if not then add the entry as
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
0x18D1
0x04E8
the vendor is the 4 digits after 0x like mine device id is 04E8..if yours is not listed then add yours in next line and save it and restart computer and plug in ur device again and check if its detected.
In case there is no .android folder or adb_usb.ini file then downloadattachment, unzip and place it on the right location and restart. check the pictures if you dont get what i am saying..just on case lol
I've waited 17 days after linking my Mi account to my Mi8L. I've unlocked more than half a dozen Xiaomi phones, so it's not new to me. However, it stops at 99% and spits out an error message in Chinese. Does anyone know what it means? https://drive.google.com/open?id=1dl6tPZdx7HfFwxQWel3hhjl9doFE5s8S
It means you haven't been using the phone for the necessary amount of time, so unlock isn't possible.
You're probably on a shop or chinese variant that need you to wait 30 days until unlocking.
Sorry for my bad english
Also, check this thread:
http://en.miui.com/thread-4456547-1-1.html
Snowdine said:
It means you haven't been using the phone for the necessary amount of time, so unlock isn't possible. You're probably on a shop or chinese variant that need you to wait 30 days until unlocking.
Click to expand...
Click to collapse
It's strange because when I tried previously, it told me I had to wait 15 days, and I waited longer than that (I took note of the date and time).
Same with me.
Use Mi Unlock 2.3.803.10 (old version).
Works perfectly.
I do not know if you can help me, I was unlocking the Mi 8 Lite requested 15 days to wait after this period I was unlocking and to my surprise the fastboot mode when I connect the USB cable it erases and I can not unlock.
Developer options enabled, usb debugging enabled and oem unlocking also recognizes more when I log in to fastboot it shuts off
rinampa said:
I do not know if you can help me, I was unlocking the Mi 8 Lite requested 15 days to wait after this period I was unlocking and to my surprise the fastboot mode when I connect the USB cable it erases and I can not unlock.
Developer options enabled, usb debugging enabled and oem unlocking also recognizes more when I log in to fastboot it shuts off
Click to expand...
Click to collapse
Try starting the process from adb, don´t use hardware buttons and see what happens.
With device on connect to pc and pay attention that pops up a message "Allow USB debugging" then tap on "always allow" and "ok".
Now type
Code:
adb devices
to see if pc is recognicing and if it is ok type
Code:
adb reboot bootloader
.
Open normally MiFlash Unlock and sign in to your account and follow the scrren on instructions. Provide some screenshots if something fails.
SubwayChamp said:
Try starting the process from adb, don´t use hardware buttons and see what happens.
With device on connect to pc and pay attention that pops up a message "Allow USB debugging" then tap on "always allow" and "ok".
Now type
Code:
adb devices
to see if pc is recognicing and if it is ok type
Code:
adb reboot bootloader
.
Open normally MiFlash Unlock and sign in to your account and follow the scrren on instructions. Provide some screenshots if something fails.
Click to expand...
Click to collapse
Do you have adb and drives for my 8 lite?
rinampa said:
Do you have adb and drives for my 8 lite?
Click to expand...
Click to collapse
Download from here SDK Platform Tools and unzip it preferably in your main drive, you can do all the adb/fastboot processes inside this folder for easier task: https://developer.android.com/studio/releases/platform-tools
And here they´re the USB drivers for our device, choose from Mi 8, it´s the same https://www.xiaomigeek.com/download-xiaomi-usb-driver-windows.html
SubwayChamp said:
Download from here SDK Platform Tools and unzip it preferably in your main drive, you can do all the adb/fastboot processes inside this folder for easier task: https://developer.android.com/studio/releases/platform-tools
And here they´re the USB drivers for our device, choose from Mi 8, it´s the same https://www.xiaomigeek.com/download-xiaomi-usb-driver-windows.html
Click to expand...
Click to collapse
Unfortunately I do not know what happens adb fastboot does not work, I did all the procedure I rebooted in option 7 I installed adb drive the curious one and that the pc recognizes the device opens the internal storage is difficult, I have always unlocked my devices.
rinampa said:
Unfortunately I do not know what happens adb fastboot does not work, I did all the procedure I rebooted in option 7 I installed adb drive the curious one and that the pc recognizes the device opens the internal storage is difficult, I have always unlocked my devices.
Click to expand...
Click to collapse
I'm not sure if you're doing it rightly. Adb works when device is on and fastboot when device is in bootloader/fastboot mode.
When you type for first time adb devices with device power on then you have to see a message from your android screen asking if you want to allow USB debugging, you have to tap on always allow and then in ok.
Provide some screenshot from your pc to see the fail.
SubwayChamp said:
I'm not sure if you're doing it rightly. Adb works when device is on and fastboot when device is in bootloader/fastboot mode.
When you type for first time adb devices with device power on then you have to see a message from your android screen asking if you want to allow USB debugging, you have to tap on always allow and then in ok.
Provide some screenshot from your pc to see the fail.
Click to expand...
Click to collapse
Yes I am aware I have experience always unlocked my gadgets something strange here on my pc or on the device I will try on another pc thank you attention you are correct, thank you.
SubwayChamp said:
Try starting the process from adb, don´t use hardware buttons and see what happens.
With device on connect to pc and pay attention that pops up a message "Allow USB debugging" then tap on "always allow" and "ok".
Now type
Code:
adb devices
to see if pc is recognicing and if it is ok type
Code:
adb reboot bootloader
.
Open normally MiFlash Unlock and sign in to your account and follow the scrren on instructions. Provide some screenshots if something fails.
Click to expand...
Click to collapse
I did as I wrote I entered the fastboot mode with adb and fastboot and the black screen with something written on top of the mini-screen that can not read appeared again, I open the unlock box and this occurs.
rinampa said:
I did as I wrote I entered the fastboot mode with adb and fastboot and the black screen with something written on top of the mini-screen that can not read appeared again, I open the unlock box and this occurs.
Click to expand...
Click to collapse
Plz provide some screenshot from your pc to see what happens on fastboot windows and on MiUnlock Tool; it could happen that you were missing something.
SubwayChamp said:
Plz provide some screenshot from your pc to see what happens on fastboot windows and on MiUnlock Tool; it could happen that you were missing something.
Click to expand...
Click to collapse
This is so after connecting fastboot mode with MiFlash Unlock
rinampa said:
This is so after connecting fastboot mode with MiFlash Unlock
Click to expand...
Click to collapse
Ok, your pc is not detecting your device connected in fastboot mode.
Try uninstalling all the drivers; those that you don´t use and those related with Xiaomi devices and install Mi PC Suite just to get installed the drivers https://mipcsuite.com open it for first time and connect it with your device on just to update drivers between both but when you´ll go to use MiFlash Unlock close it.
The USB cable used for your device is not to be shared with other devices so any of them creates a kind of data map on data wires and pc can have a sort of mistake trying to detect your device rightly.
Then to make all these steps start the process from adb as mentioned before sending with adb command to your device to bootloader/fastboot mode, this is just to confirm that pc is detecting it at both levels; adb and fastboot.
SubwayChamp said:
Ok, your pc is not detecting your device connected in fastboot mode.
Try uninstalling all the drivers; those that you don´t use and those related with Xiaomi devices and install Mi PC Suite just to get installed the drivers https://mipcsuite.com open it for first time and connect it with your device on just to update drivers between both but when you´ll go to use MiFlash Unlock close it.
The USB cable used for your device is not to be shared with other devices so any of them creates a kind of data map on data wires and pc can have a sort of mistake trying to detect your device rightly.
Then to make all these steps start the process from adb as mentioned before sending with adb command to your device to bootloader/fastboot mode, this is just to confirm that pc is detecting it at both levels; adb and fastboot.
Click to expand...
Click to collapse
É Ask me to update my device use Miui beta 10 9.4.25
rinampa said:
É Ask me to update my device use Miui beta 10 9.4.25
Click to expand...
Click to collapse
Uodate it, maybe this corrects some issues
I discovered what is written on the upper left side of the screen, press Key to shutdow. According to research I did not advance anything is USB input problem try on another Pc or a USB Hub cable.
rinampa said:
I discovered what is written on the upper left side of the screen, press Key to shutdow. According to research I did not advance anything is USB input problem try on another Pc or a USB Hub cable.
Click to expand...
Click to collapse
Of course, this is what´s written.
When PC detects device connected on fastboot or download mode then it holds it to avoid that it reboots while some data is transferring from and to each other.
If you put device on fastboot mode without connecting it to any PC then it will shutdown in 4 seconds aprox.
But like your case when PC detects that a device is connected but not in any transferring mode then it prompts to shutdown device.
For this I said that your PC is not recognicing it at fastboot mode, and installing again the drivers could solve the issue.
alxsduarte said:
Same with me.
Use Mi Unlock 2.3.803.10 (old version).
Works perfectly.
Click to expand...
Click to collapse
You right work ?