Bootloop: Acer Iconia A1-810 without stock recovery, adb neither fastboot - Android Q&A, Help & Troubleshooting

[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!

You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app

KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks

flashtool error image attached

check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update

Related

MediaTek DA USB VCOM Port - Help me fix Code 10 problem

PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
your not the only one with this problem i have it too with same mt6575 someone help please
Need to uninstall device and reinstall drivers
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
ronbo76 said:
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
Click to expand...
Click to collapse
Your USB program does give a lot of information I have never seen before, but I still haven't been able to figure out how to get the driver to load.
thanks, John
I'm having the same problem installing the MT6575 USB VCOM drivers. Is there a workaround to get this installed? I"m using WIN 6 64bit
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
ivy13 said:
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
Click to expand...
Click to collapse
Tried your first method but still get Code 10 error. Could not understand your second method. Please help. Me device is Qmobile Noir A2
hye.. any progress? am having the same issue.. just for MTK6575 com port driver
Just made my Amoi N820 work
So happy
You get Code 10 becouse your windows couldn't recognize the driver but that's irrelevant becouse flashing will work
No solution?
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
orion~X said:
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
Click to expand...
Click to collapse
i have thet problem to.
is ther solution?
I HAVE SOLUTION FOR THIS PROBLEM!!
Just ignore the error Code 10! Start the SPFlashtool and load the scatterfile, click on download and connect your switch off Phone with the computer. It will work fine.
Having the Same Problem
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Hi.
me test for me not work.
iphone 4s.
plz help me.
hihi2u2 said:
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Click to expand...
Click to collapse
Did you ever get this problem solved as I have the same issue with an MTK 6592 chip based phone?
I have the same problem too.
Installation of Media Tek preloaded drivers gives me Code 10 error.
Has anyone found the solution?
my phone is totally dead without power now after I tried to flash with SP Flash tool using correct ROM. I noticed in device manager that there is a CODE 10 error in mediatek preloader usb driver.. is this the culprit? my phone can no longer be detected now in SPFlash or MTK Droid tools... so hopeless... this is a brandnew phone I bought to be given as gift to my cousin...
I did it! I did it! I did it!
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
I've been struggling with my UMI Rome for days. It has/had the black screen problem, sometimes won't enter recovery mode, sometimes wouldn't allow charge, sometimes works just fine (yesterday). Last night i mistakenly cut off power during a battery recharge. -- today it has all the above problems (bricked) so I am trying doing a flashing again using the tutorials and tools on the Tehnotone.com site. Sintetix's reply above helps me at least have a better clue on what is going on. Wish me luck! BTW, I am using a Dell Windows 10 pc. (Results to be reported here.)
Sintetix said:
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
Click to expand...
Click to collapse
I tried what you said. It wouldn't install properly. It kept saying error (code 10) and showed in device management with a caution sign every time I installed the driver. I disabled the forced driver signature thingamabop but it still does it. I guess I'm screwed. Has anyone else fixed this?

[Q] HELP: MT6589 totally bricked

My phone is royally stuffed now. A few days ago, it started showing error message (image) and this morning after a restart, its stuck at the green android logo and won't get into the operating system. I tried the following and didn't work:
- remove sd card, battery both sim cards
- press vol+ and insert into my computer's usb slot
- MT65xx preloader appeared briefly (about 3 secs) in Device Manager and disappear. Too brief for me to do anything
I also tried power and vol+ buttons to get into recovery but I only get a dead Android image with "No Command" message (similar to image).
Before this problem, my computer can connect to my phone fine and I am using ADB_usb_driver_120827 and successfully rooted it about 2 months ago.
I can try something if my computer can hold the USB connection but how to get a USB connection? Please help?
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
dreamerman said:
OK my computer can see my phone as an ADB Interface but I still can't connect MTK Tools or SP Flash to it. Any help?
Click to expand...
Click to collapse
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Sent from my IRIS_501 using xda premium
akash akya said:
Connect to the same port you used for root....
Hold only vol up (may be down)
Reinstall drivers....
Follow more methods @ unbrick mt 6577 it may help....
Click to expand...
Click to collapse
Thanks for your help. I fixed it by entering into recovery mode and factory reset it.

mtk6575 unbrick

Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
thanks!
AND THANKS FOR yuweng and rui1 who made this all possible!
anyway now I'm back to porting CM to our device. hopefully this helped somebody (and yes, I will be more careful this time)
Hi, it worked for me and i could unbrick my mtk6575
Hi, there
rom given in post worked for me
and i could finally unbrick my phone, but now it asks for the password to decrypt storage after boot. I don't know what to do.
please provide password or any solution to it.
my device is stuck on boot?
Havunen said:
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
Click to expand...
Click to collapse
my rooted mt6575(spice mi-315) device stuck on boot logo. i also tried clar cache and wipe all data bt still same boot logo appear . i am going to ur theard when i format whole flash except bootloader and navram. and connect my device to pc and error occured.....
does some know where to find a latest rom for my mtk 6575(samsung glx,y grand duo hard copy) plz i really need 1
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
gapps and cwm problems
soulindub said:
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
Click to expand...
Click to collapse
Quote:
Originally Posted by Snekhers
I need this informations roms!
Screen : 540x960
BB Chip : MT6577
Ms Board : Glaxy S3
IMEI1 : XXXXXX
IMEI2: XXXXXX
Modem Ver. : MAUI.11AMD.W11.50.SP.V12. 2012/09/20 18:56
Bar code : 030801050804260123456788.81_20390210
Build Time : 2012 10 17 15:02:47 CST
UBoot Ver. : 2010.06
Kernel Ver. : 4.1.1
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Verno. : 005121017
hi, a have same phone and is it possible update new rom? Why? Because thşs rom very stable but one except, google contacts cant sync.
And i m trying cwm install with MTKdroid tools its runing but ONLY ONE TAKE. After the reboot in CWM menu coming orginal factory recovery(yellow simple screen and only have test etc. menus) why? ((

Acer Iconia B1-710 bootloop and hard brick fix

For all of you out there having Iconia B1-710 in boot loop or hard bricked, this is the way to fix it.
I'm not responsible to any damage you got when following the instructions.
!!!YOUR WARRANTY WILL VOID!!!
This will fix SPFT errors 2004, 6010, 1010.
At this moment I'm not able to upload files so contact me over email: [email protected]
First of all, read this entire post and make sure that you have MediaTek DA USB VCOM drivers installed.
If not do this:
1. Extract all files from the archive and run every program as administrator.
2. Disconnect the tablet from the PC, remove the back cover and pull off the battery connector.
3. Open device manager and expand Ports (COM&LPT) selection
4. Connect the tablet to the PC and right click on any new shown device. If it's reconnecting don't worry, you just need to be fast and right click it and select Update Driver Software.
5. Click on Browse my computer for driver software and click Let me pick from a list of device drivers on my computer.
6. Uncheck Show compatible hardware and from the shown list find and select only MediaTek DA USB VCOM. If MediaTek DA USB VCOM is not shown you didn't installed the drivers correctly.
DISCONNECT THE TABLET FROM THE PC AND DO NOT PUT BACK THE BATTERY CONNECTOR
1. Now open SPFT and select the scatter file.
2. Click on window and then Write memory
3. In memory settings select EMMC.
4. Click Open Raw Data and select secuoff.img
5. In Begin address write 0x1F88000 and in Container Length write 0x427100
6. Click Write memory and connect the tablet. Green circle should appear.
7. Now go back to download selection and make sure that everything is selected (including preloader and dsp_bl).
8. Press download. If everything was good you should see a green circle.
9. Remove the USB cable and put the battery connector back and back cover to place.
DO NOT TURN IT ON. CONNECT IT TO CHARGER AND LEAVE IT ABOUT 15 MINUTES TO CHARGE.
how to fix tab
i have acer b1-710 tablet that keeps restaring can i use this guide to fix it ?
Hi Daniel !! First of all, THANK YOU !!
I've used this guide to revive my HARD BRICKED tablet Acer Iconia B1-A71 and it worked like a charm !!!
I followed step by step your guide using B1-A71 original stock firmware's files.
So I came back to your post just to say THANK YOU VERY MUCH SIR !!!
I know this is an old thread, but you saved my life and it's never late to say thank you
Greetings,
Seba
hey....the firmware i downloaded does not contain scuofff.img file...can u give a link of a firmware that has one ??
I have Iconia B1-711 in boot loop (I think hard bricked) .
I think i have the corect drivers and the "SP_Flash_Tool_v5.1628"
Dose anyone have the scatter , the secuoff.img and the other files ?
Can Anybody give the required files please
secuoff file
Hi, I trying to follow your instructions but where can I find that secuoff.img file.
hello, could someone pass me the necessary files for the B1-710, thanks

Bricked Acer A3-A20. Please Help me!!

Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
acer iconia a3 a20 error sp flash fix
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
---------- Post added at 11:26 AM ---------- Previous post was at 11:21 AM ----------
fmarino09 said:
Hello everyone,
I really need help. A friend asked me to fix his tablet because it had malwares, so I rooted the device, and deleted the bad files, but then i got error messages, and at the end it went off. Now when i turn it on, it's stuck on the ACER logo, MT65xx goes on and off, I install all the drives but still goes on and off. I sent through adb sideload the stock firmware Acer_AV0K0_A3-A20_1.018.00_WW_GEN1_DCC thinking that i was going to unbrick the device but it didn't work. I tried smart phone flash with the 1.018.00 firmware but I keep getting BROM ERROR (2004). I checked the list of errors, and I changed the compatibility, and ran sp with administrator, but still error 2004. What can I do to unbrick it? By the way, I am following this xda thread to fix it, but I can't (http://forum.xda-developers.com/showpost.php?p=59693904&postcount=480) Thank you everyone!
Click to expand...
Click to collapse
hy friend use this sp flash tools v5.1515.00
this link download https://doc-0c-bc-docs.googleuserco...046/*/0B7XGoy6u4PgeX3ByYUNyWlpjZmc?e=download
go in sp flash tools then select scatter file where you download the rom on directory then check all,pres download ,now pres vol down and connect the usb to computer and tablet still press vol down,see the mtk usb on bar sp flash tools ,relese vol down and wait ,red bar,purple bar,yellow bar, ok circle , done ,now disconect the tablet and press power ,or check if have logo charger reput usb to computer.100 % tets by me work
I have a similar problem, but no error message...it just seems the computer can't see the tablet. I tried my Windows 10 machine and an old Windows XP machine I have lying around. I've installed several versions of drivers, and nothing. I'm so frustrated right now. @paulktm I tried your file, but there's nothing there. I don't get any kind of error message, the Win10 machine just acts like it sees the tablet for a second, then doesn't anymore. The XP machine sees it, but fails to install any drivers for it...even when I manually install them, they don't seem to do any good.
I'm so frustrated right now!!!
This is an old thread but maybe some poor soul finds it like I did and manages to get his device back as well.
I've had a lot of trouble with an Acer Iconia A3 A20 FHD that was stuck at the first logo screen. Powered off and connected to the charger it only showed the battery logo with the flash but no animation any more. Booting into recovery (Pwr+VolDn) worked but mounting the system partition didn't work.
SP Flash always aborted with the dreaded "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (0x7D4)" / "BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)" although cabling and drivers were perfectly all right. Obviously Acer patched the preloader in order to lock out SP Flash's download agent - that's customer support - thank you [email protected]#%&!!!
Solution: Power off, start SP Flash download/readback/whatever, press VolUp *and* VolDn simultaneously and plug in the usb cable. This way the download agent should be able to do it's job. I also plugged out the battery all the time and this seems to be necessary.
Flashing worked as it should and the tablet booted nicely and I didn't even loose my apps and data since I excluded the USRDATA partition from flashing.
Good luck!
Hi
same problem, tablet bricked after installing custom recovery and on boot loop
tried to unbrik with but SPF tools, com port is working but the firmware won't upload...
I waited for ages.. nothing...

Categories

Resources