[Q] Can't turn on my HTC Desire SV - Android Q&A, Help & Troubleshooting

Hello
I can't turn on my HTC Desire SV
This problem arise after unsucessful try update my Android
I can't enter boot menu. I try get out battery, press and hold "volume down", insert battery back and press "power", but nothing happens. I get out both SIM and Memory card and try again, but nothing happens too
If i connect my HTC to PC, PC define it as "Unknown Device"
As i understood, the bootloader crashed probably. To recover bootloader, i need to flash my HTC with special flashing device, e.g. riff box. Is it correct and only solve of my problem? Or other methods to recovery my smartphone (without using special devices) are exist?
Sorry for my English
Thanks in advance

i also have same problem
now i connect my htc disire sv to pc it show qualcomm hs-ysb qdloader 9008
i have riff box bt there is no such model in riff box
any other way to repair boot of my htc disire sv

mukass said:
Hello
I can't turn on my HTC Desire SV
This problem arise after unsucessful try update my Android
I can't enter boot menu. I try get out battery, press and hold "volume down", insert battery back and press "power", but nothing happens. I get out both SIM and Memory card and try again, but nothing happens too
If i connect my HTC to PC, PC define it as "Unknown Device"
As i understood, the bootloader crashed probably. To recover bootloader, i need to flash my HTC with special flashing device, e.g. riff box. Is it correct and only solve of my problem? Or other methods to recovery my smartphone (without using special devices) are exist?
Sorry for my English
Thanks in advance
Click to expand...
Click to collapse
Is your problem solved??? coz i also hav d same problem after flashing boot.img plzz help me

Related

[Q] No Flash Mode on WT19i

I am not sure how i managed to do this,does when i was trying to unlock my boot loader with the test point method using s1tool or when i press the Repair TA button on Octopus SE Suite.Since then i can not enter in flash mode on my wt19i.It just shows the Sony logo and starts charging.Before this i was able to flash it normally.I`ve tried every possible flashing tool but all of them are asking me to enter the flash mode manually. (Unplug cable, power off, press and hold Volume down key and insert the usb cable).Where could be the problem?I have read many treads but i couldn`t managed to find a solution.Please help.Thanks.
Have you installed the drivers provided in flashtool?
And install pc companion to get drivers, too!
Sent from my SK17i using xda app-developers app
Check here bro, http://talk.sonymobile.com/message/151266
I saw this when I googled,
"press volume down button and then home button"
mihahn said:
Have you installed the drivers provided in flashtool?
And install pc companion to get drivers, too!
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
Yes they are installed.Here is an image where i can see that the ADB drivers are installed.(Highlighted area).
I`ve tried this also.I know that i must hold only the volume down key wile inserting the cable.I`ve done this few times few weeks ago.But something is messed up and i think its when i was trying the testpoint method using the s1tool.Is there any option in s1tool for reseting the phone to its original state?
Come on guys, no one had this problem before?Is it software or hardware related?
Update...
Is it possible that somehow buy upgrading to 4.0.4, key combination for entering in flash mode is changed?
cevi said:
I`ve tried this also.I know that i must hold only the volume down key wile inserting the cable.I`ve done this few times few weeks ago.But something is messed up and i think its when i was trying the testpoint method using the s1tool.Is there any option in s1tool for reseting the phone to its original state?
Click to expand...
Click to collapse
And you turn your phone off and after that you hold volume down and connect while holding volume down to pc and there's no green light? Is it orange or what happens?
EDIT:: Just found this thread, and there's same problem solved. But you will need the original WT19i_35850804005723_11-02-2012_20-51-48.TA file and I don't know where to download it. Maybe contact ramezzidane (in the thread) and ask him where he found the .ta file or if he could upload it for you, because it seams that Octopus SE Suite has overwritten some things like fastboot mode etc. Hope it'll help you
mihahn said:
And you turn your phone off and after that you hold volume down and connect while holding volume down to pc and there's no green light? Is it orange or what happens?
Click to expand...
Click to collapse
When i get the prompt from flash tool i:
Unplug the phone
Turn off
hold down the volume - key
plug the usb cable to the phone
No color light at this point
On the phone appears the Sony logo
i hear a sound like new device plugged on the pc (No driver installation window on the taskbar)
The light goes orange and battery icon appears on the screen showing that is charging
That`s all.
Is there any method other than with Octopus Suite for rewriting TA?
cevi said:
Is there any method other than with Octopus Suite for rewriting TA?
Click to expand...
Click to collapse
So your bootloader is unlocked or locked at the moment? You say you were trying, but is it or not?
mihahn said:
So your bootloader is unlocked or locked at the moment? You say you were trying, but is it or not?
Click to expand...
Click to collapse
No.My bootloader is locked.
dude it may be driver problem
do one thing
go to device manager in windows 7
in bottom most u see "universal serial bus controllers"
expand the menu and uninstall all usb drivers(option in right click)
restart ur pc and now try to connect again
Have you tested your volume down key on Android? Maybe it doesnt work since you tried to unlock your phone...
In addition, i would try in another computer, installing drivers from the beginning.
Sent from my WT19i using xda app-developers app
cevi said:
No.My bootloader is locked.
Click to expand...
Click to collapse
You could try to flash the content of the ftf manually, but that's dangerous, cause if it doesn't work your device is bricked and you can't enter flashmode anymore to flash stock firmware.
And you can't repair via pc companion, cause you can't enter flashmode to flash the firmware again and you can't repair using sony update service, cause it's the same?
If you're sure it isn't a driver problem (install flashtool drivers and pc companion and restart pc) it should be only solved with flashing the ta, but that can only be done in flashmode and you can't enter it, right?
So is your device rooted, then unroot (if possible) and bring it to service center. They should repair it, but I can't promise. Tell them (cause flashing with flashtool voids warranty), that you had a problem and you wanted to repair using pc companion and you couldn't because you can't enter flashmode. That's the only method I think, except from writing the ta again. But don't know if they would repair it for free or if they can solve the problem...
Maybe we can find another solution for your problem
My phone was network locked few hours ago. I was trying the test point method again and now its locked totally.It is not accepting any sim cards.I read a post here on the forum where the guy was explaining this procedure so at the end he managed to fix the flashmode.But as he stated the phone will remain network locked.For that he mentioned the setool method for network unlocking.For me went bad.Now my phone is network locked and the key combination still doesn`t work.So now can you give me the cheapest way to unlock my phone first and then go back to my first problem.Is there any chance to get it unlocked by the IMEI number?All of the keys on the phone are working very well but i still can`t enter in flash mode.I tried flashing on another computer with fresh windows installation but it`s same.It`s not driver related i am sure.Ether is wrong key combination or is that TA thing.Thanks to all of you guys for your efforts, but i must find a way to fix these problems.
Update...
Ok Guys.I`ve take the phone to a local repair service and they`ve managed to fully unlock it.It cost me 10 eur for that.Now on the bootloader status in the service menu says "Yes" instead earlier when it was "No".But i still have the Flashmode problem.I hold the Vol - key while plugin in the cable and the phone just starts charging with a orange light indicator.Where could be the problem i really don`t understand?Any idea?
I think the problem is the ta. Octopus may have overwritten some functions like flashmode. But I don't know exactly if it works to rewrite ta...
And what should i do next now?The newest i've noticed is that my GPS is not working anymore.I think that it's the ICS version but i am not able to reflash it.Comon is there no one that had this problem?
Sent from my WT19i using xda app-developers app
The guy from the mobile repair store told me that when i was doing the test point method i`ve broken something in the JBS or JVS.I didn`t understand him very well.And he told me that he somehow managed to unlock my phone but about the flashing problem he said that i will never may flash the phone again.Is this ok or?

[Q] Bootloader problems

I'm in trouble guys, i can only go to the bootloader and the hard reset menu.
When I turn ON the phone, it just goes to the "windows mobile 7" screen and then it restarts and do it all again.
What should I do??
I tried to flash but the mobile device center does not detect it and so it doesn't do a USB Conection...
So, I basicaly can't do anything....
Please help
rpincho said:
I'm in trouble guys, i can only go to the bootloader and the hard reset menu.
When I turn ON the phone, it just goes to the "windows mobile 7" screen and then it restarts and do it all again.
What should I do??
I tried to flash but the mobile device center does not detect it and so it doesn't do a USB Conection...
So, I basicaly can't do anything....
Please help
Click to expand...
Click to collapse
Dear,
Seems that your phone is bricked.
Use Y cable method that will solve all
drivers
I think i can do it by WMDC but, i canĀ“t install something called "Qualcomm CDMA Technologies MSM" driver...because the windows does not found the driver online.
I already searched everywere but i can't do it.
It was suposed to it buy it self when I connect the phone to the pc.
Please help
rpincho said:
I'm in trouble guys, i can only go to the bootloader and the hard reset menu.
When I turn ON the phone, it just goes to the "windows mobile 7" screen and then it restarts and do it all again.
What should I do??
I tried to flash but the mobile device center does not detect it and so it doesn't do a USB Conection...
So, I basicaly can't do anything....
Please help
Click to expand...
Click to collapse
Not to worry try Y Cable Gold Card Method

[Q] Flashing hboot........... Experts plz help me out

Hello everyone,
I bricked my HTC desire HD by flashing a wrong CWM recovery. I did this myslef thats why i know it. Now my phone is all dead it does not boot and the bootloader is dead too. There is no device detected with usb, But when i hold down (vol up+ vol down+ power on) a green light starts blinking and the phone shows up in computer as (qualcom CDMA technonlogies MSM). After installing the drivers it is redable in QPST only. This software identifies it as a phone in "download mode"
I have seen on internet tutorials about flashing Bootloader by QPST, these tutorials are about Karbon mobile, LG, samsung but there is no tutorial about htc.
Is there anyone who can provide me a way to flash bootloader with qpst, or qpst firmware for desire HD. Or if any one can convert the original firmware to (HEX) format so it can be flashed by qpst. i will be very greatfull.
I know that JTAG can fix my problem but there is no one in around here who can do this, so my only option is to flash it with QPST or have its mother board replaced.

Blackview BV6000 phone dead after SPflash tool format

Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html

need help

My device Moto e2 (surnia) just got hard bricked now I can't able to access bootloader, please help me to get device back. thanks in advance
What does happen when you try to boot it normally/bootloader?
aliberti98 said:
What does happen when you try to boot it normally/bootloader?
Click to expand...
Click to collapse
It doesn't turn on or charge, when I try to go in bootloade mode it doesn't go, the led light just blink while I connect to charger and when I connect to it PC it give me Qualcomm.....
Maybe I had the same problem with a Nexus 4 some years ago. You can try to google the name of the driver (I think you are under Windows) and find some guides to fix it because I fixed the Nexus with an LG software. I can also try to find for something if you provide the complete name of the driver.
Sorry for my bad english.
Edit: Try also with "QPST", and tell if it works.
Well, I have the same problem with my Moto E XT1511, when I try to turn it on, the LED only flashes, and the same thing when I try to enter Fastboot (with power button and volume down), when I plug it in to my PC it says (Qualcomm HS-USB QDLoader 9008 COM6) (In Printers and Devices).
Any idea what could we/I do?

Categories

Resources