Related
I read all the posts on upgrading the titan, and I think I might have been confused with posts for the mogul and the vx6800. I loaded the 3.35.04Radio Rom from the following post http://forum.xda-developers.com/showthread.php?t=376012, I let the entire installation go through, it actually setup sprint settings on the phone, then I loaded DCD 3.0.4.
Now everything says sprint I can make and recieve calls, but I can't get online. If I access anything online it says it can't Dail #777. I tried IOTA and that just errors out, I think thats for sprint too. I tried to flash the old radio back 3.27.00 but it only goes to 9% and spits out an error. I figured I could flash the stock back on, and then go back to DCD but I can't seem to flash backwards.
I'm not sure how to proceed from here? I felt confident, because I have used kitchens for my kaiser, and lots of different roms on my kaiser, but the TITAN is kicking my a$$. Any Ideas? I could really use some help.
you werent supposed to run customization on the sprint rom... I believe you have to flash to orginal rom then start over again. When you flash the spring 3.35 radio stop when you get to the (tap the screen) page when you first boot... then flash to dcd rom.
I just remember reading that flashing to orginal rom is easiest way to reset your phone settings to what they are supposed to be, When you ran the sprint customizations you changed phone settings you werent supposed to. You may want to search the forum a little to find another easier way to fix
robrest said:
I read all the posts on upgrading the titan, and I think I might have been confused with posts for the mogul and the vx6800. I loaded the 3.35.04Radio Rom from the following post http://forum.xda-developers.com/showthread.php?t=376012, I let the entire installation go through, it actually setup sprint settings on the phone, then I loaded DCD 3.0.4.
Now everything says sprint I can make and recieve calls, but I can't get online. If I access anything online it says it can't Dail #777. I tried IOTA and that just errors out, I think thats for sprint too. I tried to flash the old radio back 3.27.00 but it only goes to 9% and spits out an error. I figured I could flash the stock back on, and then go back to DCD but I can't seem to flash backwards.
I'm not sure how to proceed from here? I felt confident, because I have used kitchens for my kaiser, and lots of different roms on my kaiser, but the TITAN is kicking my a$$. Any Ideas? I could really use some help.
Click to expand...
Click to collapse
Here is the thread you need my friend.... XV6800 back to Verizon Stock ROM
hope that helps ya....
That should get you on the right track....
azclown said:
Here is the thread you need my friend.... XV6800 back to Verizon Stock ROM
hope that helps ya....
That should get you on the right track....
Click to expand...
Click to collapse
AZCLOWN, that sounds like a plan!!! I like it. I'm downloading the the revert ROM now. Wish me luck. I'll fill you guys in later.
Got it.... Kinda
i folowed all the posts and got the original verizon rom installed then re did the radio skipping customization, reloaded dcds latest rom. booted up great! BUT there always a but... i cant get data, i get a PPP authenticATion error. its looking for a password. i read a couple of posts that said i should load the VZW rom again and place the phone in airplane mode. i dont know now.
Do you have your username and password entered in the network settings? All Verizon customers who upgraded to this radio and rom have had to re-enter that info.
Not sure if you have or not so I will included this just incase.
Goto settings/connections/edit existing connections
Keep hitting next until you come to the screen for the user and pass.
User.... xxxxxxxxxx(your phone number)@vzw3g.com
Pass.... vzw
He went back to stock radio, then went back up to 3.35.04 which usually clears out all settings. He can try manually editing the settings such as MDN and MSID in EPST, or he may have to call Verizon if he needs an A-Key.
no good so far....
I tried the ID and password from lllboredlll, then I went back to stock rom, which contains the old radio still the same thing, even if I try the ID again. I'm gonna call verizon. I gotta call them when I have a spare couple of hours.
Any other ideas? I tried #228 still no good! o well
You are going to need to call vz and tell them you did a hrd reset and need a new a-key.
You didn't have to flash back the second time, get the rom you want set up, *then* call them. They won't give you a hard time as long as they think you did a hard reset.
Good luck,your almost there!
IM BACK
nuguy said:
You are going to need to call vz and tell them you did a hrd reset and need a new a-key.
You didn't have to flash back the second time, get the rom you want set up, *then* call them. They won't give you a hard time as long as they think you did a hard reset.
Good luck,your almost there!
Click to expand...
Click to collapse
I called VZW and I was on the phone with them for exactly 2 hours, after getting hung up on twice.... Thay actually had to ask me where I was located, and reset a switch where my connection was "stuck" After that I reloaded the radion, without customization, and then loaded DCDs rom....ITs all good now!!!! YUP YUP
Hello,
im am using the latest official ROM by HTC (2.73.405.5).
Can i upgrade to another ROM (Modaco or smth else..) without losing all my settings, apps, messages and files?
Thank you,
m0jo.
..or can i create a nandroid backup, install a new rom, and if i dont like it, just roll back to my old rom with all my settings using nandroid restore?
*bump* sorry guys
if you have the recovery image, yes a nandroid backup will keep all your settings.
including app settings and everything, like EVERYTHING ahahah
If you read modaco's post with his rom, I think he says you dont have to "wipe" (from the recovery image) if you come from your version. (double check though).
so i think youd keep all if not then most of your settings if you dont wipe and just install the rom.
ps i thought i read somewhere that his rom might not be up to speed if you dont wipe first, but by all means, if you have a nandroid backup, then try it out!
(ps i found this out the hard way but updating back to ruu from htc website erases reovery image) not that this is even that relevent
just make a nandroid backup, then update without wiping. if it doesn't work restore the backup and find another way or fix the problem, if it works be happy...
thank you.
but next time pls tell me that all my settings ARE gone AND my phone loses a lot of features so i have to reinstall the official ROM... :/
i cant see how you lost your settings if you didnt do a wipe... but then thats why we said do a nandroid backup! so restore to that from your recovery image
all my settings are gone, i had to configure my phone like i started it the first time.. The only thing that was not lost, were my apps. But some of them are gone though.
m0jo said:
all my settings are gone, i had to configure my phone like i started it the first time.. The only thing that was not lost, were my apps. But some of them are gone though.
Click to expand...
Click to collapse
then you did something wrong. if you don't wipe then your settings won't be deleted. modaco's custom rom 3.0 does NOT delete your settings during installation, i have done it like 30 times. also you were told several times to make a nandroid backup. if you did you can restore it and EVERYTHING is back like before. if you didn't do it is entirely your fault, don't blame us.
and what features exactly are you missing? mcr3.0 is full of features, you are eather dumb, blind or drunk
I am currently running Axura and want to upgrade to the newest release. If I follow the steps to upgrade will it whipe my data?
ie. Will I need to restore all my stuff with a titanium backup or will it still be there because I am only upgrading? <not that I won't backup, but I am wondering if I should bother or wait a bit before doing, cause the restore is annoying >
Thanks for your time.
All the original post of the ROMS will inform you if they wipe and I believe most if not all do wipe.
Axura does in fact wipe so back up with TB.
That was what I thought, though I didn't see anything specific in the upgrade section that said it would. Thank you.
NP and I stand corrected, they used to. I do know it will though.
I am hoping someone has some knowledge of this...I had a lot of trouble getting CWM recovery to boot on my vibrant, but thanks to these forums, I installed ODIN, got back to Eclair, re-rooted and got CWM recovery to boot. I am using the Auxoria ROM and when I installed it I selected wipe data, etc, but when I flashed it through CWM, I am not sure if it did it or not. It appears to be working, but it seems to have a few strange behaviors from before. I then restored all apps and system data from Titanium Backup. Then got to thinking, can Titanium backup restore any system data from the Eclair ROM that would cause issues? When you restore after flashing a ROM, are you supposed to NOT install system data? I wonder if anyone has any experience with that and can make a recommendation. And Happy Mothers Day out there to any mom's out there that give so much to raise a family!
Restoring system data is absolutely a no-no
You typically can restore the green ones, if on the same os... But if you had eclair settings and restored on froyo, I bet you have a lot of little bugs.
I would odin to jfd, flash a new rom and then restore just the apps+ data.
Also, axura was great, but done master has moved to greener pastures you may want to try another. I think master said he would try and support this device still, but that's to much to ask of him I think.
s15274n said:
Restoring system data is absolutely a no-no
You typically can restore the green ones, if on the same os... But if you had eclair settings and restored on froyo, I bet you have a lot of little bugs.
I would odin to jfd, flash a new rom and then restore just the apps+ data.
Also, axura was great, but done master has moved to greener pastures you may want to try another. I think master said he would try and support this device still, but that's to much to ask of him I think.
Click to expand...
Click to collapse
Thank you....What other ROM would you recommend. I looked for one with a working GPS, and minimal bugs. I really want to do cyanogen 7 like my mytouch4g, but it doesn't seem ready yet. Am I just able to reflash and wipe data when I do? Any reason I really have to redo my odin and eclair refresh?
jman531 said:
Thank you....What other ROM would you recommend. I looked for one with a working GPS, and minimal bugs. I really want to do cyanogen 7 like my mytouch4g, but it doesn't seem ready yet. Am I just able to reflash and wipe data when I do? Any reason I really have to redo my odin and eclair refresh?
Click to expand...
Click to collapse
You can't go wrong with Trigger or the new Bionix NextGen.
I would go back to stock, just so you know you'll go to the next rom with no bugs.
Check my signature. Amazingly easy to go to jfd > new rom.
I would suggest Trigger for having everything work as it should/theming.
I went back to eclair and flashed trigger 3.2, but it seems pretty bland? No way to edit functions for home keys, or customize much of anything...looks like 2.2 really, am i missing something? I selected launcher and want to try TW launcher but I can't see where I can do that. I wanted to edit my grids but don't see that either...like replacing the app of web browser with text app...used to be able to edit on homescreen but that is even gone...
Is it possible to update your prl and/or profile through CWM? It would be much more convient than flashing multiple roms.
I guess not? Anyone?
I would like this function also.
Sent from my MoPho using XDA
I have my nandroid of stock that I go to about one a month to check for updates. It's real quick and easy make a back up of whatever ROM I'm on, restore stock, check for updates, backup stock again, restore ROM I was on before. All done in less than an hour if I was in a hurry
Sent from the back of a MoPhoKing AOKCP
Unfortunately you have to be on a semi stock rom to flash the prl.
I nandroided curent rom,flashed joker stock, updated prl and then restored my nandroid rom of choice.
Kinda pita but that is the way it is.
exactly, pita but what can you do ;-)
I'm glad this came up again as it reminded me that I need to make a maintenance ROM for just this reason.
That would be perfect! Simple lightweight and cwm flashable. Access to the debug mode in a 5 minute flash would be awesome.