yes, I know this has been posted before, to a degree but not really my answer. I currently have the ROGERS WIRELESS TyTN. I was thinking of changing the housing as the previous owner made some scratches on the body. I would like to know if http://cnn.cn/shop/tytnsoftbank-x01ht-black-housing-p-1978.html this will fit it. I just like the black colour better so I thought I would ask first. It doesn't have the side view of the case, so I thought I would ask here first.
Thanks
Eugene
I got no replies which is sad. But I bought the case, and it finally arrived today. Fits perfect
I have the mda vario 2 on att plan so I change the housing to the 8525 evrything fits perfect
Related
I have received so much from this forum that I decided to give my pinch of salt. Is not much, but I think it will be good to others like me.
I was looking for a case for my brand new 8125. It have to be light, compact, without a belt clip and give some protection to scratches and minor bumps. It will be used to protect the 8125 inside my jean's front pockets. I found that the silicon skin was the closest to my needs, so I got one from Ebay.
When I installed it I knew that it was perfect for me , but no access to the keyboard really started to bother me after 5 minutes. So, I took it to my work table and made a cut along the left side of the skin case and two small cuts down the edges of the case. That created a flap that allowed me slide the keyboard without taking the 8125 out of the case.
The mod took me 2 minutes to do, but 30 minutes to take the corage to cut my new case. Now my case is perfect. After 2 weeks of usage the only problem that I have is that the vol control is harder to use because the flap some times gets on the way. Not that big problem anyway.
Here are some pics. Hope that this help someone.
Diego
Here is the case with the keyboard open.
One from the back
I don't know what that thing is, but an HTC Wizard it is not
i believe its a great idea....I like my boxwave skins for my treos.
Oh and I believe he said its an 8125 several times!
i believe its a great idea....I like my boxwave skins for my treos.
Oh and I believe he said its an 8125 several times!
@Equilon
It's a Cingular 8125, but I think it will work on any silicon skin case for the Wizard.
Diego
which one is it on boxwave.com
I want to get a silicone case from boxwave.com for the T-Mobile MDA, but not sure which one it is on the site. Does anyone know which one it is?
T-Mobile MDA Compact?
T-Mobile MDA II?
T-Mobile MDA III?
T-Mobile MDA IV?
T-Mobile MDA Pro?
kamusta1 said:
I want to get a silicone case from boxwave.com for the T-Mobile MDA, but not sure which one it is on the site. Does anyone know which one it is?
T-Mobile MDA Compact?
T-Mobile MDA II?
T-Mobile MDA III?
T-Mobile MDA IV?
T-Mobile MDA Pro?
Click to expand...
Click to collapse
there is no silison case for the WIZA200, they just have one for the WIZA100 (Cingular) version...
Will this cingular case be good for my T-Mobile MDA?
Having owned a TYTN and a TYTN2, I love HTC smartphones with keyboards. After spending a year with an Iphone 3G I have bought a Rhodium. The only problem is that I detest silver phones, so I have ordered one of thier OEM housings in black. I used a coupon code of TS20090701A for 20% off.
I'll post a teardown video and review of the housing once I receive it.
Those pics look to be the sprint version casing.
does this fit on the normal rodium here in the netherlands??
i like the backplate how much is it??
kable said:
Those pics look to be the sprint version casing.
Click to expand...
Click to collapse
Agreed.
I hope the OP doesn't have a standard Rhodium otherwise there may be a bit of a fitting nightmare when it comes to relocating the ExtUSB port because of the extra 3.5mm jack on the Sprint version!
wow i cant wait to see it opened up i have the t-mobile usa version and would like to know if i could change the housing, the people are right about that silver one bieng the sprint version but i think the black one on the sight is probly the oem htc touch pro 2. I tried to enlarge the pic and it didnt let me so i could not see the rear cover but on the red version the back was the same as the unbranded touch pro 2 good luck with the install i will subscribe. In any case has aanyone tried to open the us t-mobile version and see if the guts are the same as the unbranded version?
That case "looks" more like the T-Mobile one. Notice the Battery Cover, from what I can tell in those screen shots the stylus doesn't go through it like the Verizon/Sprint/HTC/AT&T versions. Of course it's not a true T-Mobile one because it does have the tapered edge around the screen (Bazel).
Its the Sprint TP2 housing.
http://www.new-cell-phones.org/sprint-htc-touch-pro2-pictures.html
kable said:
Those pics look to be the sprint version casing.
Click to expand...
Click to collapse
I have received the casing and there is no way to make it work with the T7373 model.
I have emailed the supplier and askerd for an exchange for the correct, albeit orange, model.
So far no response from the vendor...
I've emailed twice asking about exchange.
agitprop, what makes it impossible to adapt? Is it the shape of the T-mobile frame that won't fit in the other housing? Or is it the touchscreen?
If it's the touchscreen, you can buy an alternate version that will fit the Sprint housing, they're all over ebay for about US$30.
Be sure...
To notice that the one pictured above is yes the Sprint version but on top of that the Sprint version has both the mini-usb port AND the 3.5mm jack, so for a t-mobile touch pro this isn't going to work, or at least you'll have gaps.
I was looking at the silver one on their site and might go with it, since looking at the picture closely it appears to only have a hump on the back for the mini-usb port.
Buddy of mine has the Verizon version of the TP2 and I must say it looks a little nicer that the T-mobile one, it actually "looks" smaller as the edges are mor rounded off, hence why I'm interested in the silver on on that site.
Are there any other technical reasons why the case you purchased will not work? Please explain.
Vission
My beautiful phone became ugly
The invisibleSHIELD for the original Tp2 doesn't fit the device simply because it's much and much taller, obeviously desined for another device.
I ordered one for my original (unbranded) TP2 and when i tried to instal the back shield that was a big screw when i discovered it's too taller to fit my device (how can it happen ?) the upper part toward the power button was ok but the lower part toward the mini usb does not fit it at all, i had to use a scissors to cut the extra material with a very ugly and uncomfotrtable result
I had to make a hole for the hand strap near the mini usb as the original one in the shield was suited on the mini usb and i cut it with the extra part.
I think the invisibleSHIELD for TP2 is good but for any thing else other than the TP2 itself.
Sounds like you just got the wrong on or something..plus I wold not do a whole body one, just the screen!
I am sure
The backage i recieved has a white sticker on it that says :
HTCTOUPRO2FB
HTC Touch Pro 2
Full Body
I got the Zagg all around body shield installed at the local mall and it fits just fine
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
I wouldn't go with any other brand...
meromar said:
you are speaking about the original TP2 or the branded one?
I'll try to post some photos to domestrate the problem.
Click to expand...
Click to collapse
I had an one on the G1 which my wife has now. I have it on my Hero and TP2, just the screen cover not the whole body one. I have a black gel case for the TP2. Mine is T-Mobile branded and I wouldn't put any other protector on my phones.
To be honest though it took me 2 tries on the g1 to get it perfect and 1 on the rest of the phones. It is frustrating but if you scrape and apply at the same time very slowly (kinda like window tint) it comes out great.
One more thing I got the universal as the shop I had did not have one for the TP2, they said it was to new. It was rather easy you just line it up to a grid and cut from there.
I am looking for a black hard plastic case for my AT&T Tilt 2. I have found several in clear, but very few in black. I came across the Cellet Proguard on eBay (http://cgi.ebay.com/New-HTC-Touch-P...wItemQQptZPDA_Accessories?hash=item25576f72bc) but the pictures as worthless.
Has anybody purchased this case or a similar one? More importantly, can you show me pictures of it installed on your AT&T Tilt 2?
Thanks!
this one?
I have tried several black rubberized hardcases for TP2 (VZW), including the Seidio innocase, but this one from Naked Cellphone is by far the best:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=300357171388
more pics here in a post I made about Tp2 cradles:
http://forum.xda-developers.com/showpost.php?p=4993317&postcount=26
Its a tiny bit thicker than the Seidio and is much better at protecting the phone from serious falls or bumps. Together with the screen protector Naked Cellphone sells, its a great combo.
While I do appreciate your reply and your pictures, you are using a Verizon version and the sole purpose of my post is for AT&T.
KevinACrider said:
While I do appreciate your reply and your pictures, you are using a Verizon version and the sole purpose of my post is for AT&T.
Click to expand...
Click to collapse
With a few seconds' browsing their store I found these.
I dont know if any of these will work for the AT+T version, but they also sell:
one for sprint TP2:
http://cgi.ebay.com/RUBBERIZED-BLAC...wItemQQptZPDA_Accessories?hash=item518d79938d
one for T-mobile TP2:
http://cgi.ebay.com/BLACK-RUBBERIZE...wItemQQptZPDA_Accessories?hash=item518cecaed0
one for plain vanilla TP2:
http://cgi.ebay.com/BLACK-CASE-FOR-...wItemQQptZPDA_Accessories?hash=item414a704371
Looks nice! shame there not shipping worldwide
I'm going to be selling my Touch Pro2 shortly, but, after just 4 months, the HTC screen protector is already so badly scratched you can barely see the screen in places. I'll be removing it soon and selling the phone without one attached; but I'd like to include at least a cheap screen protector in the box for the new owner so he has something to be going along with.
My phone is actually the unbranded Hong Kong English version - but, as far as I know, its dimensions are the same as the standard unbranded UK model. (If anyone knows otherwise, please speak up!)
I'm looking for a screen protector that is cheap when bought in the UK, but which fits the phone exactly, and will not completely fall to pieces in the first two weeks.
I am NOT looking for a high-end, premium thing.
Suggestions?
heres a link to OEM protectors, ive tried loads of cheaper and more expensive ones and these are the only perfect fit ive found, prolly last about 3 months, but there surprisingly cheap!!!
http://www.mobilephonesdirect.co.uk/Accessories/Cases-and-Covers/sc467/p19356.aspx