hi every one. I have a qtek s200 and I have a white screen problem. I don't know why one shiny morning my qtek appear with a white screen. First I think that was the screen and buy a new one. after replaced I turn it one with the new screen the screen seams equal :s After that I made a lot of search and did some thinks like install Active Sync. The active Sync does not detect my phone.. I install the last versions but nothing appear.. when I plug the phone on computer with USB cable nothing is detected by computer but if I press photo+on button it detect a "windows Ce usb device" and nothing appear on active Sync.
I already try reset using style and nothing. I try to update using PDAMobiz_Prophet_WM6_V1.00_Step1 (ROMUpdateUtility_NV_G4.exe). It finish and I get the message that was successful updated. And if I try to update it again appear the same screen saying that don't have a version (see the printscreen). I never see the 3-colour menu :s it just don't appear.
Any one one what I have to do to play again with my phone?
Thank you very much. Best regards.
printscreen http://img217.imageshack.us/my.php?i...3046337ny4.jpg
http://forum.xda-developers.com/showthread.php?t=405384 read this i hope that help
Related
:roll: my device O2 xda died on me yesterday. I was performing the upgrade recommanded on myxda.com. Program A went alright and created a connection with my PC. Program B missed things up. The device showed a message on the phone interface saying"Wireless is not connected, please switch on wireless. I did not know how to do that and I entered my SIM PIN but didn't work. The device fooze and didn't respond to any thing. I did soft reset. again the same message and the device foze. I did a hard reset and it got worse. The device opens on the O2 screen (blue page) then switched to a blank white screen with the keyboard icon at the lower right hand corner and this has been the case since yesterday.
I can't establish connection to my PC and try to reinstall the Programs A&B again cause I did the hard reset and the device is limp. Please anyone help those who are in the lower end of the Technology ladder.
thanks you in advance
Try this thread:
http://forum.xda-developers.com/viewtopic.php?t=4123
I haven't had this problem but the symptom sounds the same as yours.
Maybe here
I had the same I think.
http://forum.xda-developers.com/viewtopic.php?t=6832&highlight=
My XDAII died horribly when trying to downgrade from wm2005 to wm2003se (it is stuck in bootloader, i've tried everything, see http://forum.xda-developers.com/viewtopic.php?t=21848&highlight=).
I have had to buy a new device and went for an Ipaq h6340 but its RUBBISH compared to my beloved xdaII. I am desperate to get the xdaII working again with any rom version at all.
Can anyone suggest anything at all?
Are you facing 'Country ID error' too? If you do, get urself a copy of er2003edit.. If not, would you mind giving more details how this error occured? Maybe I can help..
There follows a detailed account of my xda problems...
1. The xda is stuck in bootloader mode, the screen shows "Serial v1.01" in black text even after all (button pressing combinations of) hard resets.
2. When placed in the (mains powered, usb connected) cradle the screen shows "USB v1.01".
3. On running Himaupgradeut, and clicking next, i get the "checking the pocket pc..." message, after 30 seconds the XDA II turns itself off.
4. The confirmation screen appears on the PC after another 20 seconds or so with the upgrade and cancel buttons. No current device versions are displayed. As the xda has powered itself off the upgrade does not work.
5. On removing the xda from the cradle the xda shows "Serial v1.01" in black text on a red line background.
6. On replacing the xda in the cradle the xda shows "USB v1.01" in black text on a red line background. Retrying the upgrade procedure produces the same results.
I have also tried upgrading/flashing from the SD Card but get the error message ROM image is wrong size. I get no other error messages.
I am not an expert, but I just recover my dead XDA II device last night. Maybe you needed to take care the following items. That I have over look.
1. Connect directly to the USB port and don't use USB hub.
2. Hard reset each time before upgrade again.
3. Make sure that Windows can detect the device as "Microsoft Sync......". In the web some people say it is not a must. But I found that I can upgrade my device only when the device is successfully detected.
Before successful recover the dead device. I always got communicate problem to Pocket PC.
Hopes my experience can help.
Hi Cojones, had exactly the same problem.
Follow the instructions from the previous poster (tscshk), not through usb hub, etc direct on motherboard. I also removed the usb connection, reset my PC, so it cleared all activesync/usb settings, device on the cradle, THEN connect to usb.
If you see the 'found new hardware/device...' dialog etc, then it should work. (mine did, twice! can't resist playing) :wink:
Also I downloaded the original Roms direct from the O2 site and used those to get back to 'standard'.
HTH
ah, thanks for your help everyone. I managed to get hold of an upgrade that didn't check country id and that did the trick. I now have my cherished xdaII back...hooray.
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Hi,
It is quite normal for the new Tango ROM to display that extra HTC specific step, even though it doesn't work!
I experimented with the Titan a bit and found that as soon as the Start screen appears after setup, before doing anything else, long press the Connection setup app in the app list and uninstall it.
It will enable normal functionality.
If needed you can always download it again from Marketplace.
「 Jai Hind 」
Sent from my GT-N7000 using xda app-developers app
It happened to me too!!!
Moreover, after a hard-reset the HTC Market disappeared in the market!
I disabled the pin to the sim re-formatted, and connected to electricity, and aftew few times HTC market reappeared (!), immediately updated ALL the htc software (even the connection wizard) and everything is OK now... exept the possibility to install INSIDER (by Microsoft)... it is said that the app is not available for my device (!!!) ... I used it until yesterday on my Titan with Mango... I REALLY DO NOT KNOW
BYE
link8506 said:
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Click to expand...
Click to collapse
Yes, exactly the same problem happened after hard-resetting on tango. I simply waited a bit with the phone on the main menu and the softkeys not working. After a while, I received the WP7 welcome text, and the softkeys started to work again.
maTTeo
Hi all,
I made a new hard-reset.
As suggested by maTTeo I simply waited even with softkeys not working... I only disactivated the pin on sim so that the Titan could find an internet connection.
After receiving the SMS of woelcome on WP7, I immediately upgraded all the HTC apps
Everythings seems fine for the moment...
BYE
My screen on my unrooted SGS4 is totally black after a glasschange that an idiot was supposed to make for me.
He failed. But the phone isnt dead !
The buttons is lit when I press Home or Power button, and the lightdiode is blinking blue as if I gave a message waiting.
If I connect it to a PC I can see the phone in Explorer, but when I click on it its emty...nothing to see.
I purchased a mhl-adapter that they said could show the screen on a TV using HDMI, but I get NO picture ...
I tried ADB 1.031 myself but seems it cant connect.
This is all I get...
C:\adb1>adb devices
List of devices attached
e80981bc offline
I also tried Kies, whitout any luck...
hi! i have found similar threads, but they did not help me solve the problem, so here i am, writing a new one sorry guys. also sorry for my bad english, it is not my primary language..
i have an htc desire X which has a damage only on the outside display, the touch screen worked perfectly. then, all of the sudden the phone kept restarting, freezing for few seconds on the HTC welcome screen, then turning off again. it did that for about few hours then died completely, battery wouldn't charge either. on charge, red light on, no sign of life.
i have bought a new battery, and the phone turned on and did the same again, restarting every few seconds. i have pushed the low volume button + start combination, to have it go to the bootloader menu. since then it is frozen on that menu, stuck there. no buttons would work. they do work to get to the menu, but on bootloader not anymore.
i am a newbie, i dont know what to do, except for the fact that i have all contacts still in the internal storage and i was hoping to save them to an external disk/pc/microsd.
when i restarted the phone, the sim and the microsd were already out.
connecting the usb cable to the pc doesnt bring me anywhere either, my pc says "device not recognized" then it doesnt see any device.
please help me to get my data out somehow:crying:
little update:
this morning the "smart"-phone is not stuck anymore, i was able to get to the bootloader and select recovery, BUT unfortunately any attempt to push the on button to confirm it went wrong, phone keeps just restarting or freezes again on HTC welcome screen. any idea?