:roll: my device O2 xda died on me yesterday. I was performing the upgrade recommanded on myxda.com. Program A went alright and created a connection with my PC. Program B missed things up. The device showed a message on the phone interface saying"Wireless is not connected, please switch on wireless. I did not know how to do that and I entered my SIM PIN but didn't work. The device fooze and didn't respond to any thing. I did soft reset. again the same message and the device foze. I did a hard reset and it got worse. The device opens on the O2 screen (blue page) then switched to a blank white screen with the keyboard icon at the lower right hand corner and this has been the case since yesterday.
I can't establish connection to my PC and try to reinstall the Programs A&B again cause I did the hard reset and the device is limp. Please anyone help those who are in the lower end of the Technology ladder.
thanks you in advance
Try this thread:
http://forum.xda-developers.com/viewtopic.php?t=4123
I haven't had this problem but the symptom sounds the same as yours.
Maybe here
I had the same I think.
http://forum.xda-developers.com/viewtopic.php?t=6832&highlight=
Related
My atom is turned off. Can't even go to bootloader mode, or do hard reset - no any response
Last resort: Take out the battery and leave it out for a while, and then put it in again. It may work.
Already did, left it for all night, but nothing. Maybe it has some another engenier menu?
Already did, left it for all night, but nothing. Maybe it has some another engenier menu?
Help my Atom is dead!
taulan said:
Already did, left it for all night, but nothing. Maybe it has some another engenier menu?
Click to expand...
Click to collapse
Did you get a resolution? Facing the same issue. Happened on holiday when I tried to do a soft reset. Completely out of ideas on how to resolve...... Help
i am having the exactly same problem
is there any senior can help us
I got the same problem but with my gigabyte gsmart i300
I've had the similar problem with my old XDA 2. The problem was then that when I'd gone to soft reset, the pin had somehow jammed in. Thus, the phone would continually reset and would appear blank. So check that on yours, make sure that the reset pin is actually coming back out.
I have the exact same problem when upgrading XDA II... When I upgrade the Windows Mobile I mistakenly plug off the connection while it still installing.. Then the screen goes black blank.. waht I do after that is connect again the XDA to the craddle.. and do the installation progress again.. It works for me back then.. But my other friends who have the same problem does not that lucky and his XDA II just goes blank.. I've already check the see02.com...
and this is how they solve the problem:
Should the installation process be interrupted or terminated abnormally, you might encounter the following screen on your device.
http://i97.photobucket.com/albums/l221/rusadi/XdaAtomROM_Jan2006_Step9a.jpg
and you may also see the following screen in your PC.
http://i97.photobucket.com/albums/l221/rusadi/XdaAtomROM_Jan2006_Step9b.jpg
When this happens, restart your PC and ensure all other running applications stopped. After that, restart your device and connect the device to your PC with USB cable. The following screen should appear.
http://i97.photobucket.com/albums/l221/rusadi/XdaAtomROM_Jan2006_Step9c.jpg
Repeat the installation procedures except that ActiveSync will be shown as Not Connected.
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
hi
had same problem D/pad on/off button and reset release reset first and it should put it back in bootloader mode then do upgrade again, it did work for me
thanks newquaymarc
ive done that now ive got a low light page that says
"serial" at the top
"v1.03" at the bottom
any idea what i should do next?
Oooh upgrade seems to be installing \o/
Thanks
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
sisfis said:
would you happen to know if there is any way I can manage my contacts from the pc? i searched activesync and there appears to be nothing there. My old motorola bought up kind of a virtual phone on the pc and managing and adding contacts was easy.
Click to expand...
Click to collapse
Are you serious? Outlook/Contacts! Nothing easier.
hi again
ative sync should kick express in and that will manage contacts/calender
would using thunderbird as the default email client **** this up then?
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
i was attempting to upgrade this xda that i just bought to this same version. is this the newest one? what version of windows is it? i got an error in the middle of the upgrade now it just shows the connection type at the top of the screen and V1.01 on it. tried the UpgradeUt_noID file but it says that it cant connect after about 3 minutes
sisfis said:
Hi
Unfortunately I was in the middle of upgrading the software to version 172181 when I decided, for some strange reason, to pick the phone up out of the cradle and make a call. DOH!
I can no longer get the phone to boot up / turn on it is just stuck on the low light o2 backscreen and shows
r 1.17.00
g 1337.20
d 1.72.00wwe
Im quite literally just stuck on that screen, the phone wont seem to reset, reboot or hard reset or turn on or off.
I assume im doing the hard reset correctly on/off button and reset button with stylus.
I did see somewhere to use the on/off button, camera button, record button and reset button with stylus but this does not appear to work either.
I don't know whether the condition is terminal or not but anyone can help i would really appreciate it I have a lot of information on there that is very valuable to me.
Click to expand...
Click to collapse
It's bcoz the flashing/upgrading/installing of ur fone seems not to be finished. Always follow instruction. If you really want to do something, think twice so you never messed up. nweiz, try to load it again in bootup mode and re-flash it. there are a lot of ROM for the Himalaya, you can download one. Try to search. again, FOLLOW INSTRUCTIONS!
Firstly I would like to thank numourous people on this website, as a long time reader and solver of a few phones I have had over the last year, its thanks to you people that I have been able to fix, upgrade, and modify these phones.
Thank you all.
My problem is I recently bought 3 of these SPV m3100 from a local boot sale, 2, I've got working, unlocked and WM 6.1 installed and mobile shell, running perfect, the other one starts and gets up to the phone password, which I have no Idea what it is, I've tried to do a hard / soft reset ,I can get it into bootloader, but It trys to sync with activsync but says "unlock password !"
I've also tried a 1gb micro sd card, but again nothing happens as its locked, I've downloaded the manual and it states that if you have lost the password, you have to clear the memory!!!
I've tried to do a hard reset but I do not get the option of returing phone to original( assuming this might get rid of the password?) I just get a white screen with no writing for me to press "R", bootloader is the coloured bars, and when normal booting, screen is perfect up to password screen!
Any help would be appreicated.
Many thanks again
lost password SPV M3100
baileybax said:
Firstly I would like to thank numourous people on this website, as a long time reader and solver of a few phones I have had over the last year, its thanks to you people that I have been able to fix, upgrade, and modify these phones.
Thank you all.
My problem is I recently bought 3 of these SPV m3100 from a local boot sale, 2, I've got working, unlocked and WM 6.1 installed and mobile shell, running perfect, the other one starts and gets up to the phone password, which I have no Idea what it is, I've tried to do a hard / soft reset ,I can get it into bootloader, but It trys to sync with activsync but says "unlock password !"
I've also tried a 1gb micro sd card, but again nothing happens as its locked, I've downloaded the manual and it states that if you have lost the password, you have to clear the memory!!!
I've tried to do a hard reset but I do not get the option of returing phone to original( assuming this might get rid of the password?) I just get a white screen with no writing for me to press "R", bootloader is the coloured bars, and when normal booting, screen is perfect up to password screen!
Any help would be appreicated.
Many thanks again
Click to expand...
Click to collapse
Switch off the SPV M3100, then on the bottom of the phone you have the answer call and end call buttons in clusters of 3 buttons on each side. The Top button on the left is a dash like symbol -- above the windows button, and you have the same dash like symbol button -- on the right above the ok button. You need to hold down both the dash-like symbol buttons and the middle silver button at the same time, then restart the phone. The phone will ask you if you want to reset the entire phone memory and settings back to factory settings and confirm this by using the Query keyboard letter "R". Click R and it will wipe it and set it back to its original settings. Hope this helps. Thanks Pete from www(dot)86plex(dot)com
Bought a touch pro knowing that the backlight on the screen works, but that the actual screen doesn't. I've tried connecting it to the computer and it said it that the phone needs to be unlocked first...i was going to see if I could unstall SOTI on there and use the computer to view the screen and stuff...i've tried hard resets and I'm lost can anyone help.
Bad screen or flex cable
Open and close the handset while it is turned on, if it flickers or you see any color or shape goasting then the flex cable is needs replacing.
If you can see the backlight on, and nothing changes then look for impact damage, usually something/somone fell on it.
If no damage markings, then the unit is probably locked, an no one knows the code.
Contact seller for more info?
I haven't try to recover a locked TP yet.
But, If your up to trying something. Find the correct "Service Provider" up-date or original shipped ROM from HTC support, this forum or PPCGeeks.com.
With the shipped .exe ROM packages, the TP can be put in bootloader and "Clean Flashed" without needing to be unlocked or add anything.
This how updated ROM are delivered and installed from HTC.
Hope this bit of info helps. I have the Last Alltel .exe if you need it.
Thanks for the info but sadly that didn't work. The loader says it can't establish a connection.
Well update got the phone to hard reset and now it's unlocked can anyone walk me though what happens after the hard reset. Like after the hard reset what screens show up show that i can set this up without the screen and use my SOTI program to view the screen on the computer
daytonboi said:
Well update got the phone to hard reset and now it's unlocked can anyone walk me though what happens after the hard reset. Like after the hard reset what screens show up show that i can set this up without the screen and use my SOTI program to view the screen on the computer
Click to expand...
Click to collapse
Here is the thing. The rom is going to start up doing the initial setup (calibration, time zone selection, etc). Mymobiler might work better since it installs via activesync and connects to the device the moment you plug it in. Give that a go and see if it works.
Thank you i will try that
Probably not the right place to ask but is there someway i can install a program on the phone without any kind of input from myself...ie putting mymobiler or similar cab file and having it run it when i inserted the memory card and i not having to make any kind of inputs on the screen? seeing as i can't see anything?
daytonboi said:
Probably not the right place to ask but is there someway i can install a program on the phone without any kind of input from myself...ie putting mymobiler or similar cab file and having it run it when i inserted the memory card and i not having to make any kind of inputs on the screen? seeing as i can't see anything?
Click to expand...
Click to collapse
If you put an autorun file in the root of the card pointing to that cab, you should be able to do this. However, the device will ask you if you want to install to memory or storage. I guess if you simply press the "Enter" button (circle in the D-pad), it might just do it.
Hello,
I experience a very weird problem with my HD2.
When I want to connect my HD2 to pc then my pc (and other pc's) doesn't recognize my phone, nothing happens. Also my phone isn't giving me the option between "Activesync" "Disk drive" or "Internet sharing". (Altough the option to ask it on connection is turned on under settings). So not an active sync problem I guess. The usb doesn't seems dead because it still charges, on my HD2 the power sign comes up when I connect the usb to pc and the led is on. When I pull it out then the led goes off and the power sign dissapears. But no "data" connection is possible anymore.
Is something broken in my registry? I tried soft resetting several times.
No hard reset yet but I am waiting to do this, maybe someone here knows the answer.
I started experience the problem after I used Tomtom last week ( i used it alot already) . I experienced a problem that my HD2 was stuck in "Carkit mode" thus when someone called me he flipped the screen and putted speaker on. Even when I set it off under settings it. Navipanel was also turned on. I downloaded the hotfix from HTC for Navipanel and now that problem is gone. My phone is again in normal mode when I call or receive calls. BUT the usb data connection doesn't seems to be working anymore .
Someone here knows the magic answer ?
Can you post the Radio version and ROM version you are using?
ROM version : 1.66.405.2 (76641) WWE
Radio version : 2.06.51.07
Have you ever changed the ROM on your device or is all still origional as you got it from the store?
If origional:
1) bring it back for repair, since its not your fault
2) or install HSPL change your radio and rom
I would just send it for repair when that happens. Specially when its in origional state.
I had this problem once but at the moment i connected the phone through a USB Hub
No it is the official upgrade rom from htc site.
Phone is acting weird also.
Everytime someone is calling it puts the speaker on .
Maybe I try a hard reset for this "fkd up" software?
Would this help?
Hmm did a hard reset and the problem persists.
No usb data connection.
Speaker turns to loud when someone is calling me.
Screen flips sometimes.
Guess it is a hardware problem.
Going to turn it in.
Although I completely agree that your unit is probably on the fritz, take into account that the MicroUSB cable can be the problem as well when it comes to connecting to your pc. I bought some Ebay cables and my phone wouldn't connect properly with those. Charging was no problem.
Yes it is on the fritz i guess.
The problems started suddenly and I also tried another usb cable who was also working fine before.
I managed to get connection yesterday just once after pushing it in the phone and moving it a bit. So I guess the usb input is broken or the motherboard. Guess it is the motherboard because of the other weird problems (when want to call someone the screen turns vertically and puts the speaker on), also when i got called. And this after a fresh hard reset.
Hope they will replace the unit without a hassle.