ive got an o2 xda2 , not sure what version rom it has on it, but i want to upgrade it to the latest orange version as i use it on orange and would like all the orange settings and stuff. also will it fix the bluetooth problems?
could someone please give me a guide as to where i can download all the sotware i need and exactly what to do please?
or could someone be kind enough to add me to msn and help me through it?
my msn is [email protected]
Thanks
I have the same problem. I also wanna go to 1.72
Orange helpdesk says there is no date set yet for them to have it
They are spending their time on star wars :evil:
where can i download roms fron the orange site? ive heard that you can but i cant find any
No problem young's...it's very easy to do that.
@ NeCrOpHiLiCaT
If you need more help, I have added your MSN address in my one!
I have only orange CH settings, so the best to do is:
Load the old ROM (original one, maybe 1.66), install Extendet_ROM tools you can find on XDA site, export from the phone Extendet ROM those *.cab whos name are ORANGE on your PC Harddisk.
Install the new ROM (maybe 1.72), repeat the step whit extendet ROM and put in the Extendet ROM of the phone those ORANGE *.cab you extracted in the Harddisk, after that you can just go in the Extendet ROM of the phone and Tap on those cab file, otherwise, in the Extedet_ROM of the phone is a file "config.txt", edit this one, add line whit cab name. So, if you make a Hardreset of your phone it will install also Orange settings.
This last one woulb be the better way if one time you make a hardreset.
I hope this is clear Enought, because my english isn't the best!
Cheers
Hi. I Would Just like To Know How To Create A Cab File That Had All The Settings I Used On My Phone.
I Just Upgraded The Firmware On My TyTN To The AT&T AKU 3.3 Rom And Being From The UK This Ment I Had A Lot Of Information To Change In Order To Get My GPRS,WAP,MMS,E-Mails And Keyboard Layout To Work Again. It Would Have Been Really Handy If I Had Had A Cab File Wich Would Have Added All That Data For Me.
So I Was Just Wondering If Anyone Knew How To Do That.
Cheers
Sorry, Couldn't Help But To Post This, But Maybe You Also Need To Change The Setting That Automatically Capitalises The First Letter Of Every Word.
Just kidding with ya . You might have better luck in the Hermes forum, rather than the Hermes Upgrading forum.
You may try to use a software called ''WinCE.CAB.Manager''
mousey_ said:
Hi. I Would Just like To Know How To Create A Cab File That Had All The Settings I Used On My Phone.
I Just Upgraded The Firmware On My TyTN To The AT&T AKU 3.3 Rom And Being From The UK This Ment I Had A Lot Of Information To Change In Order To Get My GPRS,WAP,MMS,E-Mails And Keyboard Layout To Work Again. It Would Have Been Really Handy If I Had Had A Cab File Wich Would Have Added All That Data For Me.
So I Was Just Wondering If Anyone Knew How To Do That.
Cheers
Click to expand...
Click to collapse
Easy way is to find the Ext_ROM from a shipped ROM from Orange UK and run the extrom cabs to get the MMS/SMS and GPRS settings etc...
http://wiki.xda-developers.com/index.php?pagename=BA_PersonalCAB
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi Guys,
i've been searching reeeaaally hard but couldnt find any clue if someone cooked a german ROM based on Win Mobile 6.1..
I'd appreciate it very much if someone did or tells me where to get as my brother doesnt speak english and desperately needs improvement on his QTEK 8500 (especially more storage space)
Thanx in advance..
Basti
You are right, there is no 6.1 rom in german. I looked for it too, but nothing...
I'm also interested in a german 6.1 rom for the Strtrk.
Probably we have to wait until the first wm6.1 smartphones with german rom hit the market.
infact you don't have to. There is some sort of SDK provided by MS where you simply can take the language files from. An easier option might be to take all files from that ROM http://forum.xda-developers.com/showthread.php?t=383587 and subsequently replace the English files in our PRO ROM with the GERMAN ones.
In any case its a bit work to get to know how to dump a ROM etc. But if you really need a German ROM i guess you have create one by your own since the majority of Germans around using English versions.
regards.
Hi
4irm said:
infact you don't have to. There is some sort of SDK provided by MS where you simply can take the language files from. An easier option might be to take all files from that ROM http://forum.xda-developers.com/showthread.php?t=383587 and subsequently replace the English files in our PRO ROM with the GERMAN ones.
In any case its a bit work to get to know how to dump a ROM etc. But if you really need a German ROM i guess you have create one by your own since the majority of Germans around using English versions.
regards.
Click to expand...
Click to collapse
These files are not working with Windows Mobile 6.1 Smartphone Edition. The Screenshots showing Windows Mobile 6.1 PocketPC Edition. You could use them only if you have Erofich's Windows Mobile 6.1 Pro ROM. But as i use Windows Mobile Pro on my StrTrk and i am looking for german languages too, i will try it.
And do not flash this ROM on your StrTrk because this is a ROM for HTC Wizard. You must open it with htcRE and extract the *.0407.mui files, copy it to you phone and sets some registry keys to enable it. Or you have to rename the files to *.0409.mui and copy it to your phone.
But, i can't guarantee if this works...
StefanV3
I need help changing language from Japanese to English
is there anyone that has successfully done this?
Please let me know, Ill even PayPal for your time!
Thank you
Dragonista said:
I need help changing language from Japanese to English
is there anyone that has successfully done this?
Please let me know, Ill even PayPal for your time!
Thank you
Click to expand...
Click to collapse
Download a file (found here) called Diamond TF3D Config. It will allow you to change your tf3d to english. It should work on your raphael as well (raph is x05ht, diamond is x04ht.
If you want an english rom, flash hardspl and then the rom of your choice. This will void your warranty, however, so if possible do lots of reading and then make backups of your phones ipl spl etc so that you can restore it in case you need warranty work.
Warning: if you install an english rom, you will have a hell of a time getting your MMS working again. But if you are on the packetfull you could just use gmail.
Kevbodian said:
Download a file (found here) called Diamond TF3D Config. It will allow you to change your tf3d to english. It should work on your raphael as well (raph is x05ht, diamond is x04ht.
Click to expand...
Click to collapse
I bought a X05HT touch pro which is Japanese version. I downloaded and installed this "Diamond TF3D Config Setup v0.6.7.CAB" file but nothing changed in my mobile (its windows mobile 6.1)????
Can you please guide me a bit more !!!
You need to run the program you just installed, one of the settings is for language, select English and away you go!
Until someone develops a MUI pack, there is no way to completely convert the X05HT/HT-01A to English. Your only other alternative is to flash your phone to a WWE ROM.
Thanx guys for ur information. Now, I've set it up. Its a good one for me.
X05HT downgrade to Softbank original system...
Hi guys, i´m new here!
I have a X05HT branded by Softbank (TouchPro) using the Elite RC4, but i need to downgrade this to the original Softbank systems in Japanese.
Someone knows where i can get the ROM file to do this?
I´ll be waiting for your feedback,
Thanx
宜しくお願いします。
Kevbodian said:
Download a file (found here) called Diamond TF3D Config. It will allow you to change your tf3d to english. It should work on your raphael as well (raph is x05ht, diamond is x04ht.
If you want an english rom, flash hardspl and then the rom of your choice. This will void your warranty, however, so if possible do lots of reading and then make backups of your phones ipl spl etc so that you can restore it in case you need warranty work.
Warning: if you install an english rom, you will have a hell of a time getting your MMS working again. But if you are on the packetfull you could just use gmail.
Click to expand...
Click to collapse
Hi! I have the X05HT... but I couldn't install this program... the folder has not a exe file... How I can install this??? The setup file is a xml file...
thanks
I had to copy the CAB file... I could make it now! Thanks...