Hello:
I'm sure a total newb question.
I am only marginally savvy with this sort of stuff - but I would like to experiment with some of the ROM's that I see in these forums for my AT&T Fuze (HTC Raphael).
What I would like to know is, where can I get the original ROM for my device (or backup somehow off of my device) in case I want to revert back to the "original settings".
I'm sure that I'll find the cooked ROM's here to be superior, but at the very least, I would like to know if I can reset this in the future whenever I upgrade and want to sell the device.
Thank you.
Hey there,
I'm in the same boat as you. From what I've found by searching, it can be found here:
http://forum.xda-developers.com/showthread.php?t=439346
However, the HardSPL instructions clearly say that you have to also get the following:
"be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!"
And that's where I'm stuck because I can't seem to find sock Fuze radio or OS. Maybe someone can clarify for us?
check out the Wiki, all of the info you need is in there. There is a table of all of the ROMs including all AT&T stock ROM's that have been released. Definately follow the instructions for HardSPL and make sure that's installed correctly before you do anything, you can brick your phone otherwise. Also, for AT&T you will need to make a registry change or install a cab file to fix the keymappings from the original HTC Touch Pro to your Fuze. Good luck, and happy flashing.
OK, so right after I made this post, I find this page...
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
From "Device Information", I find that one of these match my device:
ROM: 1.95.502.5
Radio: 1.02.25.32
Protocol: 52.39c.25.22H
Hurray for doing "just one more search"...
schwags said:
check out the Wiki, all of the info you need is in there. There is a table of all of the ROMs including all AT&T stock ROM's that have been released. Definately follow the instructions for HardSPL and make sure that's installed correctly before you do anything, you can brick your phone otherwise. Also, for AT&T you will need to make a registry change or install a cab file to fix the keymappings from the original HTC Touch Pro to your Fuze. Good luck, and happy flashing.
Click to expand...
Click to collapse
Cool, yeah, I think this is the page I found above.
And, I found the following post, which I was going to follow: http://forum.xda-developers.com/showthread.php?t=448008
But if you have any other specific info for my device, I'd LOVE to hear it. Bricking would be very bad... LOL!
Thanks!
[Edit] Dang.. you guys respond fast! Thanks for the additional info!
Question(s) asked and answered.
Thread closed pursuant to XDA Bylaw 5551212.
Related
Hi all
I read a few bits on updating the vario 2 to windows mobile 6 Black 3.0.01 is that right ?
Can someone tell me more about what this actually is, I also read the tutorials on about upgrading the.
IPL and the SPL what are these and what is version 2.10 olipro also and the last thing is what does it mean when it talks about CID and not reading it. What effect does this have ???
I know the T Mobile bundled stuff is no use so what functionality will I have with this Black 3.0.1 and is that the best version for me to use or do you recommed a different version ???
Help Please I dont want to brick it.
Ska
skauk said:
Hi all
I read a few bits on updating the vario 2 to windows mobile 6 Black 3.0.01 is that right ?
Can someone tell me more about what this actually is, I also read the tutorials on about upgrading the.
IPL and the SPL what are these and what is version 2.10 olipro also and the last thing is what does it mean when it talks about CID and not reading it. What effect does this have ???
I know the T Mobile bundled stuff is no use so what functionality will I have with this Black 3.0.1 and is that the best version for me to use or do you recommed a different version ???
Help Please I dont want to brick it.
Ska
Click to expand...
Click to collapse
Can't believe no-on has said this already... but you need to read the Wiki and do lots of searching / reading through the forum.
It's good that you don't want to brick your device. Research the topic by reading what is already there... no need to ask the same questions again
The WIKI will explain bootloaders and flashing to you. link in the brown bar at the top of the page, it says XDA-Wiki, click it look for the picture of the hermes device and click it. There is a wealth of information there for everyone's use.
As far as what functionality you will have with what rom - read the first post in the rom thread. The cooker will usually have a detailed list of included/removed items from the rom. Only you can decide which rom is the best for you, everyone uses their device differently and as such everyone has different ideas of what a good rom is.
Lastly, if you don't understand anything read before you start to flash. The Hermes isn't as forgiving as other devices when flashing and you could very easily ruin your device if you don't take some standard precautions. The awesome people in this forum have come up with tools to help you recover from just about every form of bricking, but nothing can save you from not having a plan ahead of time.
I suggest after you read the Wiki, that you start with the Olipro Hard-SPL before you flash anything else to your phone. And as always ask yourself why you need to upgrade your device. If the answer isn't substantial and you aren't prepared to lose the device due to a bad flash or just plain bad luck you shouldn't flash. Again if you are prepared ahead of time flashing is relatively safe, but if you jump in without knowing what you should, you risk ruining your device.
I figured out how I bricked my Athena. I used the wrong unlocker version.... I downloaded it out of the "Official Athena File Library" thread, It's still linked to the original version.
I'm going to try V3 when my replacement gets here, I just can't help myself
I'm certainly not blaming this on anyone else but I think that the link should be fixed considering the name of the thread. I'm pretty sure I'm not the only mornon on the internet.
Thanks for all your work Oli.
There seems to be a lack of one central location for files and radios. ie , I'v been searching for the last few days on google and yh and still haven't really found any cooked roms that would have it all. Considering that donations are a big part I do not see how someone who bricked their device due to "incorrect" file linking would donate
hmm this gives me ideas. i guess i better talk with ltxda....
Are you thinking about banning morons?
kingpin748 said:
I figured out how I bricked my Athena. I used the wrong unlocker version.... I downloaded it out of the "Official Athena File Library" thread, It's still linked to the original version.
I'm going to try V3 when my replacement gets here, I just can't help myself
I'm certainly not blaming this on anyone else but I think that the link should be fixed considering the name of the thread. I'm pretty sure I'm not the only mornon on the internet.
Thanks for all your work Oli.
Click to expand...
Click to collapse
thank you lots for letting us know. i contacted the person who started the thread (part of the athena project), he's removed the megaupload link.
until your post, we've been clueless as to why so many people keep bricking their athenas.
once again, THANKS
OK, just to make sure. I have a standart X7500 with the official WM6 ROM.
Will the unlocker from the first post here:
http://forum.xda-developers.com/showthread.php?t=315831
Where it says "click here to download" work with my device?
Can someone post the correct unlocker? I'm rather confused with the files and threads floating around, so with any other newbie. Although I've been flashing past devices with cooked ROM, it is only here that I am having trouble understanding the instructions in flashing or unlocking.
kramerica2 said:
OK, just to make sure. I have a standart X7500 with the official WM6 ROM.
Will the unlocker from the first post here:
http://forum.xda-developers.com/showthread.php?t=315831
Where it says "click here to download" work with my device?
Click to expand...
Click to collapse
that's fine.
yetdy said:
Can someone post the correct unlocker? I'm rather confused with the files and threads floating around, so with any other newbie. Although I've been flashing past devices with cooked ROM, it is only here that I am having trouble understanding the instructions in flashing or unlocking.
Click to expand...
Click to collapse
i don't see where the confusion comes from, wouldn't you think the official thread for the unlocker is the one that has the right file posted by its developer.
you would, but people are morons.
cmonex said:
i don't see where the confusion comes from, wouldn't you think the official thread for the unlocker is the one that has the right file posted by its developer.
Click to expand...
Click to collapse
Quite true but after reading all the stuff about athenas bricking. You will be confused and will not know which file to download and install. It was good that this particular thread was posted. At least there were some forum members who were kind enough to upload the correct unlocker they personally used and tested and posted the url in a separate thread. Now, I was able to unlock my athena without confusion or fear that the unlocker that I got will brick my athena.
Well I got my new Advantage and flashed it with the V3. Success! I'm now running Dual and I love it. I'd like to thank everyone who worked on the unlocker and ROM.
I have a hurricane and i would like to upgrade it to WM6.1..
But now i want a guide! Because the last time i just did it, i bricked it.. The SPL flash went wrong and now the hurricane is dead.. completely dead.. But unfortunally i have another one i wish to try it on but i need an exact guide..
And then i suspect my other hurricane to be some kind of prototype.. I flashed the "patched_ruu" and it went fine but after that i just got a white screen and now the device dosn't work.. I have tried to get help but as it seems it is not repairable.. So i would like to know if the device i have is a "genuine" hurricane? How can i check that?
The other hurricane i had was not branded.. Nothing was stated on the cover.. The one i want to flash now is branded "Qtek 8200" and the splash screen says "Test Only - Not for sale"
Can somebody help me here ? Iam afraid to brick this device too !
Guys damned i need some help here !
There are more than enough upgrade guides. Just look into the longer WM5 or WM6 threads and make sure that the ROM you downloaded really is intended for your device. Don't just assume and better check twice. HTC devices have confusingly many codenames and are sold under dozens of different brand names. Even some people writing guides confuse one or the other model.
Sorry, I know this is the answer you just didn't want. But reading the threads provides just the kind of information you need if you don't want to brick the second phone.
Regards,
Dirk
Spades01 said:
There are more than enough upgrade guides. Just look into the longer WM5 or WM6 threads and make sure that the ROM you downloaded really is intended for your device. Don't just assume and better check twice. HTC devices have confusingly many codenames and are sold under dozens of different brand names. Even some people writing guides confuse one or the other model.
Sorry, I know this is the answer you just didn't want. But reading the threads provides just the kind of information you need if you don't want to brick the second phone.
Regards,
Dirk
Click to expand...
Click to collapse
I assumed it was a rom intended for my device, cause the rom i downloaded was in the WM6 from this forum.. The guide in the thread i found isn't very desciptive.. Others have downloaded and got it to work on their device but somehow i did something wrong OR it could be because my device was a sample.
No one with a little spare time ?
hello everyone!
i have bought a HTC Hermes from eBay and hopefully will receive the device soon. As I want to be prepared, when my new toy arrives, I have already started to read thru the Wiki and the Forums! I know, that the experts, which have been posting here for years now, want every beginner to RTFW and to use the search function and so on. What some mebers here don't seem to understand, that such a huge amount of information, which is often unstructured, easily misunderstood and/or simply outdated, is almost impossible to overcome!
personally, i am sure i learned a lot by reading thru xda-devs for sevreal days. but nevertheless, all this different information leaves me just confused and unsecure. seriously, i dont want to take any chances of bricking my pda!
so my appeal is to sum up some basic information regarding flashing & upgrading. and to make sure that i dont make any mistakes i ask all of you to correct me if i am wrong (which i am most likly going to be a couple of times).
ok. lets go!
basically i believe, that since latest developments
( --> "Free HTC Hermes SIM & CID Unlocker *New* version v3a" & --> "Hard-SPL V7"),
almost all Hermes versions can be UNLOCKED & UPGRADED safely, regardless of what bootloader version they are running....
true?
so all I need to upgrade to my phone to the latest versions is
HardSLP, the UNLOCKER and the ROMs I want to install!
true?
using those new tools mentioned above, downgrading to official 1.04 SLP rom versions (?!) to upgrade IS NOT necessary anymore.
true?
if my phone is once prepared with the two tools mentioned above, it is ready to get flashed again and again.... using those tools is a one time thing, which has to be done first time flashing.
true?
i have some questions as well you could help me with!
in what order should I start working?
what are the first steps? (which tool is used first?)
what are the major mistakes i could make to brick my device, even if i use the newest tools...?
i really hope that some people will understand my problems and try help me!
i would really like to contribute to the forums and if this wokrs out as i imagine, it could result in a new and up to date beginners guide!
thanks for reading!
please help!
regards,krz
Personally....
1) unlock as I believe it actually upgrades your SPL to 1.40. This is fine BUT if you've put Hard SPL ver 7 on then you have to run it again.
2) Hard SPL Ver7. You can put version 9 on BUT its for developers & really doesn't help the person who wants to just flash. It also throws up an error message after flashing that can be worrisome. No problem but apparently it needs fixing.
3) Find a rom you like - Only a hermes rom... If you find a rom you like for another Phone and they try to flash this you can be assured of an instant brick. Its like throwing an english speaking person into another country where no english is spoken. BIG TROUBLE... and unlike a person, the phone won't adapt and learn.
Check the forum for a rom you like, I can guarantee there is no "perfect rom" and sooner than later something else will come along that MUST be tried... Start with wm 6 as these are known to be stable and cut your teeth with these before venturing into the deep waters of 6.1. When you're confident flashing and troubleshooting these, then try wm6.1 as some work and research will/may be necessary to get these roms working stable.
4) Have fun....
Cheers...
thank you ultramag69!
unfortuneatly, noone else seems to want to help me here...
well, i'll keep on trying...
i had time for some further reading.
it seems, that I would not necessarily need the HTC Hermes SIM & CID Unlocker, if my phone was NOT simlocked.
instead of that, i could use the latest version of HardSPL to make it SuperCID!
RIGHT OR WRONG?
[btw: what excacty is the difference between SPL & MFG? what is a mfg anyway?]
I found THIS GUIDE while reading the forums.
* Housekeeping
* Flashing HardSPL
* Upgrading the Radio
* Upgrading to ______ WM6
* Programs and Settings
no matter what ROM version, bootloader, radio, etc. my phone is, following this guide would always work!
RIGHT OR WRONG?
if NOT, when wouldn't it?
what exceptions are there?
again, please be so kind and comment on this. i would realy be glad to be absolutely sure in what i am going to have to do!
there is still some insecurity left, please help me to make things a little clearer for me!
thank you in advance!
regards,
krz
Try reading 1st age of this thread.... Guides by MrVanx... http://forum.xda-developers.com/showthread.php?t=299462&page=34
As for Hard SPL, you can flash ANY HERMES rom... DONT TRY TO FLASH ANY OTHER ROMS.... Also, remember always that Hard SPL ISNT a guarantee not to brick your phone, its a safety net to help you when (and if you get to flashing alot) things go splat. It means that fixing a brick is put back into the realms of possibility instead of you now owning a very expensive paperweight. Please remember too that upgrading your radio rom is the riskiest thing to do on your hermes. most bricks come about because the radio rom gets corrupted & CANT be fixed... Hard SPL or no...As the saying goes, "if it aint broke, don't fix it". depending where you are in the world depends on which radio rom is best... research first and dont overflash this. If in Oz then 1.54.30.10 is selected by Testra. Seems to be ok...
Hope this isnt too much for you to digest...
thank you again ultramag!
ultramag69 said:
Try reading 1st age of this thread.... Guides by MrVanx...
Click to expand...
Click to collapse
i have read thru this, thank you.
but what does "reading 1st age of this thread" mean?
ultramag69 said:
As for Hard SPL, you can flash ANY HERMES rom... DONT TRY TO FLASH ANY OTHER ROMS....
Click to expand...
Click to collapse
that's clear. of course i meant any HERMES Roms regardless of version number, etc. ROMs of other devices (eg. Wizard, Kaiser) are of course NOT compatible...
i just wanted to double check, that downgrading to a certain bootloader is not necessary anymore in times of HardSLP v7...?
ultramag69 said:
Please remember too that upgrading your radio rom is the riskiest thing to do on your hermes. most bricks come about because the radio rom gets corrupted & CANT be fixed... Hard SPL or no...
Click to expand...
Click to collapse
i'm curious, why upgrading the radio ROM is that riskiy or some much riskier that upgrading the windows ROM for example. is it only, because it can't be fixed when flashing goes wrong? or is flashing the radio rom more likely to go wrong than flashing WindowsROM ?
ultramag69 said:
Hope this isnt too much for you to digest...
Click to expand...
Click to collapse
not at all!
keep it coming!
whats "wrong" with my tries to get a RIGHT or WRONG for my assumptions...?
noone seems to feel the need to answer that?
thanks again,
krz
Just the guides... Helped me lotsa times...
Downgrading your SPL from 2.10 isn't the best idea if you are gonna flash a lot a It is a safety net. If you do want to downgrade SPL you can, there is a guide in the wiki.
When the radio rom upgrading goes wrong it seems to be that the memory itself becomes corrupted. There are plenty of "fixes" BUT they seem to work erratically. The os is completely wiped and rewritten and doesn't seem to be affected by these "unrecoverable bad blocks". It can still be screwed up but is more tolerant of errors and can be repaired easily enough using MTTY(do search on wiki).
Read some of the posts about people who've bricked their phone & you'll see that MOST people who cant recover their Hermes have screwed up their radio... ie. phone displays "No GSM". Most can still use the PDA part of the Hermes BUT it won't make calls again so is considered a brick.
Most cooked roms DON'T contain the radio rom.
As for "Yes/No Answers", Yes you are partially right and no, you are partly wrong. Did that clear that up???
ultramag69 said:
As for "Yes/No Answers", Yes you are partially right and no, you are partly wrong. Did that clear that up???
Click to expand...
Click to collapse
totally!
i know that i know nothing!
anyways, thanks for trying. i think it kinda worked....
i flashed the Blue Angel and the Wizard a couple of times without any problems... my PC even crashed once while flashing the wizard.... fortuneatly i could reflash it afterwards..... i thought flashing the HERMES could be more of a hustle... ?
regarding the RADIO ROM: i guess, i will avoid flashing the radio too often!
btw: i am from AUSTRIA, Europe, and I am using the telering/t-mobile network!
recommending me a good RADIO ROM for telering/t-mobile austria would be very much appreciatiaed!
after all, flashing from SD card instead of flashing via an USB connection seems to be recommendeable regarding safety issues! i shall consider that as well!
breaking it down:
1) use HardSPL to upgrade ROMs (instead of downgrading to official SPLs, which are flashable...)
2) dont upgrade the radio too much. find the best one for your provider, flash it once, keep it if it works!
3) safety first! use the SD card for flashing instead of the PC and USB connection.
aight?
krz
Soon grasshopper, you will take over.....answering these questions...
As for radio rom, sorry, but I'm in Australia, ass end of the world where all the crap phones turn up. REALLY happy to find a FANTASTIC phone in the Hermes.....
hello again....
i want to start flashing soon, but there are still some things unclear.
regarding the AKU: i read about AKu in the forums, but i am still not sure about it....
when i upgrade to windows mobile 06 for example, is there a AKU included?
only in official ROMs?
or do i have to upgrade AKUs seperatly?
could anyone at least briefly answer my questions and maybe even try to explain the whole AKU stuff for me again...
would be awesome!
thx in advamce
krz
ps: the more i read in the wiki, the more confused i get... all this outdated information is confusing me more and more... it is really hard to catch up here. specially when all u get is a "gofckyourselfandreadthewiki"-post
KRZTF said:
hello again....
i want to start flashing soon, but there are still some things unclear.
regarding the AKU: i read about AKu in the forums, but i am still not sure about it....
when i upgrade to windows mobile 06 for example, is there a AKU included?
only in official ROMs?
or do i have to upgrade AKUs seperatly?
could anyone at least briefly answer my questions and maybe even try to explain the whole AKU stuff for me again...
would be awesome!
thx in advamce
krz
ps: the more i read in the wiki, the more confused i get... all this outdated information is confusing me more and more... it is really hard to catch up here. specially when all u get is a "gofckyourselfandreadthewiki"-post
Click to expand...
Click to collapse
You're just getting information overload, If you searched for "What is AKU" using google you'd have got this http://forum.xda-developers.com/showpost.php?p=1445514&postcount=1
Just follow Mr Vanx's Guide http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=65&Itemid=26 or else http://forum.xda-developers.com/showpost.php?p=1186163&postcount=1 from start to end & you should have a successful flash. This link is also very handy for beginners http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
Just remember if you intend to flash one of the WM6.1 Roms, many of the members feel that it is best to flash an official carrier Rom before flashing your selected Rom to prevent H/R issues. Happy Flashing!
Hi everyone, this forum is great and have seen lots things that I'm sure will be of use but having only ever had standard mobiles before I;m not sure where to start!
I've got a T-Mobile branded HTC touch dual which is unlocked to all networks but other than that it's standard.
I basically want to remove all traces of T-Mobile from the phone and set it up as HTC made it, or better if possible?
Any ideas or suggestions would be great. I've tried searching but don't know all the terminology yet so I don't know what I don't know!
Thanks in advance
Start here.............
http://wiki.xda-developers.com/index.php?pagename=HTC_Niki
Click stuff & read. Every phone needs a "ROM". You want a non T-Mobile ROM. First, Flash with HardSPL, then Flash new ROM. Then read Wiki about tweaks & crap like that. Viola. The key is read, read, read! We all have to do it too. Wiki is your friend. Wiki likes you. Wiki wants to play. Be one with the Wiki!