Related
I have tried flashing about 3 different ROMS and they the RUU stops them at 99%. The bar on the phone goes RED.
Please dont get confused with my signature, the phone is a Wizard and is running SPL 2.16.001 (G4).
The phone remains in bootloader mode (Red Green Blue screen)
What do i do from now?
Just tried again and it stopped at 100% and then went RED.
Been reading on all wizrd forums, and I dont think this has happened before.. (Well I cant seem to read it anywhere).....
Any help would be much appreciated...
Thanx
From EquinoXe:
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
Thanx for your quick response...
After it goes red an error pops up with the option of recovering...
I have tried the RUU that came with the SoftSPL package and MUN's RUU...
i think even if its a red Bar its still updating. just wait.
hi, sorry if nobody responded before, i dont know if they did so i dont know if you are being sarcastic. Leave it. Literally. Put it on, and let it update until it says something else. dont cancel it or unplug it. leave it doing it. then if a PC error comes up copy it here. Simple as that
Flash back to your original stock ROM/Wizard Love ROM first, then use SSPL again and flash your next ROM.
starkwong said:
Flash back to your original stock ROM/Wizard Love ROM first, then use SSPL again and flash your next ROM.
Click to expand...
Click to collapse
Thanx! That Wizard Love ROM manages to do the trick!
I think some of the ROM's you did would of been fine. You just have to be patient. Let it do it, watch some TV while its doing it. Wait for the PC to give you a successful message or an error message!
I'm tooooooo , plz help meeeeeeeeeee
iuemne.com said:
I'm tooooooo , plz help meeeeeeeeeee
Click to expand...
Click to collapse
As already stated above, this is NORMAL phenomenon.
Whenever I flash a new ROM onto my wizard, it always reaches 99% quick, and then, seems to be stucked there for ages. No big deal.
Just wait, the bar turns red, so what? it doesn't matter. After a while, it will complete the 1% left that take so long. I don't know the reason either, but it doesn't affect the flashing, nor it does for the phone itself. You just have to wait, patiently.
G4 stuck at 99%
hi man,
i ahve a wizard G4, i tried to upgrade to TNT WM6.0 and in between flashing my power went out...now i'm not able to flash....the upgrade bar reaches 99% then goes to recovery mode...no other rom is flashable
please advise buddy
nash
The bar turning red is a very normal phenomenon... Basically to make this very simple for all who don't believe us or freak out every time you see a red bar, this is what your wizard is doing.
GREEN:: Rom is flashing
RED:: Rom flashing is TEMPORARILY paused while RUU adjusts it's speed to finish the job.
BLUE:: Rom flashing is complete.
My suggestion to all who are flashing roms and are too impatient to take your eyes off the screen: go smoke a cigarette or get a bite to eat out of the fridge or watch some TV or hell, go for a quick drive to the convenience store down the street to buy a pack of gum to kick your computer addiction. It works for cigarettes...
In other words... BE PATIENT. It is not the end of the world if it goes red. Now if it gives you an error message it's still not the end of the world. Just flash back to your carriers original rom or give it a little Wizard Love and then try again...
Best of luck to you all...
Just wait patiently when red bar is shown (Official meaning of red bar is adjusting write method of flash memory).
It may stuck at 100% with red bar for as long as 5 minutes.
I got the same probleme with my trinity, RUU got stuck at 99% and then I get an update error from RUU and I can't flash nor restore any flash !
I am now stuck in bootloader and looking for a real solution, what can I do to have a working rom !?
same problem
I have a qtek 9100 and still 99%, but now, dosent respond, i tried soft and hard reset but only i have a black screen, no lights... nothing...
I removed the batery for a day... but still black..
Pleeeease.. Help me.
thanks
Hi everyone.
I'm not in panic, but i'm close to it.
After hardspl done, i flash to Shadow 2.0 and everything goes ok.
Then, it stuck at bootloader! Softreset, hardreset, nothing helps, and worst, i can't connect to pc with usb!! simply can't connect!!!
I've done everything i can. search a lot, read a lot, and nothings help!!
so, please help me!!
(sorry my bad english)
is your battery more fully charged? (or at least 50%)
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
mc_falco said:
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
Click to expand...
Click to collapse
Try connecting the usb and running aku 2.2 WM5. That worked for me before other times.
I Am Not Pretty Sure But It Might Help U Out!
mc_falco said:
yes, it's almost full (80-90%).
i tried to pull it out a lot of times, waiting 20s, 2 minutes, half an hour, and nothing..
I really don't know what to do
Click to expand...
Click to collapse
why not try to do old way of flashing and it might help coz'
it help me when i had bootloder stuck.
i try with Prophet_PV_Temp. rom
and it went everything good .
thanks
Take off battery and place it back, switch on. What happens?
Regards,
Carty..
First thing to try: search and read WIKI:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Perhaps the links to the AKU/NVID are dead, I didn't check, but you can use any official ROM to get your phone back.
You MUST disable the 'connect through usb' option in AS before it will work.
Please Help I Have Done Everything But Cannot Get My Prophet To Connect Via Usb.
I TRIED EVERYTHING. I have bootloader screen but when i connect through USB it just says that device not recognized and nothing would happen. I even took the battery out for 2 hours... put in another phone charged to maximum and still same problem. Please if anyone could help.. i love this phone cant let it die like that.
I have ni ideas other than that you are doing something wrong...
l3v5y said:
I have ni ideas other than that you are doing something wrong...
Click to expand...
Click to collapse
Well I used the upgrade guide and i have done upgrades before and everything went fine. Except today when i tried the new way and tried to load the New Shadow Rom. all was done ok but when the phone restarted it just stucks at the bootloader. and since then it wont connect through USB . the PDA wont get recognized at all.. any ideas?
Use the 'old' upgrade method, and recover using an official wm5 rom from the ftp server. you must disable connect through usb in active sync... see the wiki for more details (prophet recovery)
please go to the link in my
signature...
Should Help!
I've bricked my S200 after an error in uploading 4.0.0.6 and after going thru the wiki steps... it's working again
Ok i have been trying to just get my phone to work not really looking into getting nething new for it right now but the other day i turned off my phone to charge it and then when i went to turn it back on it was stuck in the bootloader screen if im not mistaken (red green blue white bars) and i cant get it to boot up my phone i tryed useing the never brick method and i got a new spl but dont know what to do after this can someone please help thanks
"Never brick method"? Who's your source for ills and leaving you hanging? What new SPL and what are you attempting to achieve?
Use the Wiki link in my sig (also linked with a sticky thread at the top of the forum entitled 'NEED HELP?? LOOKING FOR GUIDES?? NEW?? Read the XDA-Wiki for the Titan before posting'.
Return back with what you've attempted and read if you still cannot resolve your problem.
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
marcus556 said:
my objective is just to have a working phone turned this phone off to charge it and then went to turn it back on and the phone boots to the red green an blue stripes cant get rid of it
Click to expand...
Click to collapse
So you are saying your phone is just stock rom and it did this?
Are you sure you have not messed with flashing anything?
what version does it say the SPL is?
you said you flashed an SPL? What version?
These things all need to be compatible versions. This can be fixed pretty easy, but the method to fix it depends on what you have done, and what versions of SPL, Radio, and Rom you had when it broke, and what Versions you have now.. and what you did to try and fix it.
Reply with accurate information and I'll tell you what to do to fix it.
Any method I give you may require an SD card thats less than 2GB and non SDHC. You'll need it formatted to fat32... do you have this?
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
maniakx said:
i dont know if it will help since i am still new to this, but does the power+camera+soft reset reboot the phone back into the bootloader ? and if so can you just reflash via sd card?
Click to expand...
Click to collapse
Thats pretty much it... but depending on the SPL it's got to be flashed with the right versions.... so once we know at LEAST what SPL, and hopefully the radio.. it'll be simple.
Also... What provider do you have? (sprint, verizon, etc...)
AND do you want DCD 3.2.6 or do you wanna stay with a stock rom.. I can help you either way.. no difference in ease to get it done.
marcus556 said:
i dont know what to do thats why im posting does anyone have a clue where i can start i dont care if it has modified firmware or w/e on it i just want my phone to work i think verizon isnt gonna give me another warrenty replacement so im just wondering if neone can help me fix it without dealing with buyin a whole new phone
Click to expand...
Click to collapse
marcus, you have start by demonstrating a motivation to help yourself.
Starting a thread with the rather ambiguously useless title of "Help" is already a big no-no.
Second, I have given you the links to the Titan Wiki that will explain what you are seeing and routes to go from there.
Third, people here can directly rehash info from other sources (such as the wiki or their own knowledge) but it's rather like shooting in the dark since you don't seem to be too concerned by helping yourself as you still haven't stated that you have bothered to read the forum's fundamental resources and return to specifically state where you are at.
Common upgrading problems explained and solved is found from the main page of the Titan Wiki under the heading of Problems and Questions
(!Pleeeease read here before posting on the Forum):
P: My device is stuck at the Red, Blue and Green Screen?
S: 1. To exit the bootloader, press the reset.
2. Connect your Titan to your PC's USB and then on your PC execute titan_exitbl.exe
3. You may need to reflash the Radio/Operating system ROM
Click to expand...
Click to collapse
From what you have described, those are the routes to attempt.
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
marcus556 said:
ok i never messed with the phone tryin to upgrade it or nething it jus happened one day after i turned the phone off and wwas chargeing it when i tried to turn it back on it was at that screen and i cant get it off so thats all the information i can give u other then that spl-1.04.0000 thats all i can give u sorry im not as smart as some of you guys with this stuff oh and yes i have a card
Click to expand...
Click to collapse
Sounds like it is a stock Verizon phone pre MR1. If you are not interested in free GPS then get the MR1 update from Verizon and run it with that boot screen on the phone connected via USB to your computer.
If you do want free GPS then follow the WiKi basically starting from scratch with a new phone. You could also try to hard reset the phone and see if it will come back alive as well.
Just to clarify, you can actually get third party GPS working on MR1 (see this thread).
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
i am starting to really hate this fing phone!!!!!!!!!
marcus556 said:
i got a warrent replacement and shouldnt have even mesed with it i went to update to windows mobile 6.1 and it will start to update but make a noise on the computer like it was disconnected and say error my spl no is 2.07.000
Click to expand...
Click to collapse
2.07 I believe is the "Locked" spl from Sprint or used with NueSPL relocker. If you want to flash the latest MR1 update from Verizon, I'm assuming, don't quote me on this, you can do it with this spl. You still may have to "Relock" it to 1.07 or below using Titan-Relocker, not NueSPL's version. What does your phone display now? Still 3 color?
the phone is displaying tita100 spl-2.07.0000 below that it says cpld-9 and at the top right it says ruunbh and where can i get the relocker at?
It's stuck in bootloader mode. Use the attached utility to "Unlock" the bootloader "MODE"
OR....
if you are going to flash to a custom rom... copy a TITAIMG.nbh file to your MicroSD card and hit reset.
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
marcus556 said:
its saying cannot open usb port. please make sure, that usb connection in activesnc is disabled. Also make sure, that your usb cable is properley connected. i went an made sure it was disabled and it is connected right
Click to expand...
Click to collapse
Best steps to take....
Disconnect cable.
Get into bootloader mode.
Open activesync and uncheck the Allow USB Connections and Allow Connectsion to one of the following. Click OK to make sure it takes.
Then connect the USB cable.
When Bootloader says USB instead of Serial... then execute the titan_exitbl.exe
ok it didnt work i unplugged everything the cable from the computer the cable from the device and went into activesync and unchecked the boxs went back in to make sure they were unchecked they were then i plugged the cable up waited like you said for the usb and ran the file got the same message......thanks for your patients with me.......
by the way i dont know if u know this but it is stuck in bootloader i cant get into the phone at all so the micro sd card wont work
I know that no one will probbly be able to help but i had a TMOUS HTC HD2 and believed that i have bricked this phone.
While i was attempting to have the Core Cell ROM for HD2, everything was going along fine ( i had the black screen with the HTC and the bar on my phone's screen and even the "you hacked it" and "successfully done notifications" ), when all of a sudden, i get the software update failed and the screen with the red,green, blue, and white stripes.
I believe whle performing an HSPL, i picked the 2.08 HSPL. don't know if that had anything to do with it and also the phone is heating up.
So give me the bad news, fellas, i'm screwed, right?
rjones9902 said:
I know that no one will probbly be able to help but i had a TMOUS HTC HD2 and believed that i have bricked this phone.
While i was attempting to have the Core Cell ROM for HD2, everything was going along fine ( i had the black screen with the HTC and the bar on my phone's screen and even the "you hacked it" and "successfully done notifications" ), when all of a sudden, i get the software update failed and the screen with the red,green, blue, and white stripes.
I believe whle performing an HSPL, i picked the 2.08 HSPL. don't know if that had anything to do with it and also the phone is heating up.
So give me the bad news, fellas, i'm screwed, right?
Click to expand...
Click to collapse
Naw man. You're fine. Take the battery out, and restart, then flash the ROM. The Red, Green, Blue, White screen is called the Bootloader, it comes on when flashing new stuff onto the phone. You NEED HSPL, so you DON'T brick your phone haha.
gaarry said:
Naw man. You're fine. Take the battery out, and restart, then flash the ROM. The Red, Green, Blue, White screen is called the Bootloader, it comes on when flashing new stuff onto the phone. You NEED HSPL, so you DON'T brick your phone haha.
Click to expand...
Click to collapse
thanks for the quick reply, dude. but because i'm such an idiot i may need some help here. when the battery is out and you say restart, what exactly do you mean?!? i've taken the battery out, tried performing a factory reset and still wind up with the bootloader screen. i know and sorry for being stupid but any help you can give me would be appreciated.
Since you have the bootloader have you tried going ahead and flashing a new ROM and Radio?
rjones9902 said:
thanks for the quick reply, dude. but because i'm such an idiot i may need some help here. when the battery is out and you say restart, what exactly do you mean?!? i've taken the battery out, tried performing a factory reset and still wind up with the bootloader screen. i know and sorry for being stupid but any help you can give me would be appreciated.
Click to expand...
Click to collapse
he meant simply take your battery out, put it back in and boot up.
if you can get to bootloader you can 1- install hspl and then 2- install a new rom. when you go to bootloader, does it say 2.08hspl or 2.080000?
i cant update my rom on my htc hd2 i have no clue why not. it goes to the status bar and it stays at 0% on both my laptop and my phone i tried it on a different computer but still no luck, any help guys?
Your info is quite a bit meager... there are tons of possible reasons why it doesn´t work. The more you quote about what you´ve done, the better one can help.
blackheim747 said:
i cant update my rom on my htc hd2 i have no clue why not. it goes to the status bar and it stays at 0% on both my laptop and my phone i tried it on a different computer but still no luck, any help guys?
Click to expand...
Click to collapse
You should give more info such as HSPL version, Radio version, roms, etc