Hi.
I have a big problem.
Im installed this rom
http://pdaclub.pl/forum/index.php?topic=117019.0
its on qsqa 3.0 proffesional rom based
and now activesync cannot connected with phone.
Why?
im trying everything
You should ask author first in pdaclub.pl
I see 1.07 in your signature and new build. Better than 20759 ? I'm still using 19971 that's why I'm asking you.
Pozdro
szmidt344 said:
Hi.
I have a big problem.
Im installed this rom
http://pdaclub.pl/forum/index.php?topic=117019.0
its on qsqa 3.0 proffesional rom based
and now activesync cannot connected with phone.
Why?
im trying everything
Click to expand...
Click to collapse
Jeez,is this promoting a other website here on xda
You should ask it there
Have you tried rebooting your computer? I know it sounds simple, but I had a very similar problem when I flashed my Fuze from ATT stock rom to ROMeOS. Everything I did with the phone didn't help, but a simple reboot of the PC and everything is fine.
Never had the same problem with a Hermes phone, so I can only guess that something about the Raphael ROM is causing the problem.
Who knows it could be the rom. Insure Start-->programs-->(system, or whatever folder you may have it in)-->ActiveSync-->menu-->connections the Synchronize all PCs using this connection is checked and `USB is selected in the drop down.
Good luck
From the beginning i had terrible problems with activesync, and finally i relised that the 2meter usb cable i have is too long for that work !!! After i worked with a 30-40 cm cable everything was excellent.
Related
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable pda/phone enviroment so that I may do the work I need to without having to hard reset every other day or so.
When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so the update can't run and throws back an error that it lost connection with the device.
Any Help Here? Thanks
PS: I love the idea of being able to use my 8525 for all my work and play needs, but if this update doesn't help make the device more stable, I will have to sell it for something that doesn't crash this much.
hey..iv got same problem.. i think it maybe cause we are using windows vista (thats the only information i can find about it).. i wanted to update ma rom aswell
I'm using XP Pro.
try running it on another system...if available...
anyone know the solution to this?!
OK, have you installed HardSPL ??
Check my SAFE WM5 upgrade guide, if you follow the procedures in there you should be fine.
Yeah, as far as stability goes most the wm5 roms out of the box aren't going to be the best. with any rom i use sktools to tune it up for performance/stability settings. It does this automatically so you don't have to find various registry keys. So don't think just because you are going to another rom everything will be okay.
Read the wiki, search the threads, you will find answers to all your problems.
As far as you not being able to connect what is your spl number? Also, have you tried hard reseting then connecting or trying another computer. I had the same problem when downgrading a black 2.5 with hard spl 2.1 ( i had to downgrade to send it back to cingular). I ended up just downgrading to the highest version of cingular rom which is branded AT&T. It looked like a pretty good rom but I did not play with it.
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Malik05 said:
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Click to expand...
Click to collapse
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
mrvanx said:
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
Click to expand...
Click to collapse
point well taken...=)
you mention, since he has already gotten HardSPL, why would that mean his device doesnt reconnect in bootloader?
put it in bootloader first and then run the update...
make sure you disable usb connections with active sync put your phone in bootloader and run the update might as well go with WM6 its a lot more stable than any WM5 rom i have played with .
OS crash
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
trgrapsonu said:
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
Click to expand...
Click to collapse
I've run there updates on my 8525. If the computer is shutting itself down, try another computer. This sounds odd. More of a computer problem then a Tytn Problem.
Malik05 said:
try running it on another system...if available...
Click to expand...
Click to collapse
=) have you even tried it?
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
emuyshondt said:
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
Click to expand...
Click to collapse
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
slavetolustnyc said:
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable . . . When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so . . .
Click to expand...
Click to collapse
You may want to try using the Hard SPL v7 and then install your ROM. I did that and all went smooth as silk - six times now. I have been browsing ROMs to see which one suited my needs an personality, and it has been fun. You can find that on my FTP site at ftp://xda:[email protected]/xda_dlz/
This is a dynamic IP Address from a cable modem so two things are true
1. It is subject to change at any time.
2. It is not as fast as some of these speedy servers
But, I do know where it is.
shogunmark said:
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
Click to expand...
Click to collapse
I had tried this yesterday and checked the Enable advanced network functionality box. Today I unchecked it and suddenly the PC saw a new USB device (HTC Sync USB, I think). It still wouldn't sync automatically so I manually executed /windows/repllog.exe. This time it connected.
Some observations:
- After the connection was established the the name of my 8525 was changed to something different (something like WM_ComputerName1, Where ComputerName is my computer's host name). I changed the name back and was able to re-invoke repllog.exe and sync with the old name.
- If I disconnect the USB cable from the phone and plug it in again ActiveSync doesn't connect until I manually run repllog.exe. It does work when I run the exe on the phone manually.
I went ahead and started the upgrade process after connecting by running repllog.
Executing the RUU file from the HTC site first put SPL 1.11 on the phone and left the phone in bootloader mode (with the tricolor screen). I left the phone with bootloader screen and followed the instructions (although by now ActiveSync had shut down so the part about the AS connection that the installer asked for was not true). The progress bars appeared on both the phone and the PC. It took a few minutes to complete, but the update was successful.
After the upgrade I was able to sync over USB without any problems. I am now syncing my contact from Lotus Notes and setting things up to my liking. Once I got over the USB connection problem everything worked fine!
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
Good Morning!
Well, I upgraded the ROM on my (previously) Cingular 8525, two days ago, and continue to fail at getting it recognized by both my Dell M170 laptop and my Alienware Area51 Desktop via USB.
Activesync 4.5
Tried it with both Advanced Network Functionality and without.
All firewalls off.
No errors during ROM update.
Tried two different USB cables.
Reinstalled XPpro SP2, fully patched.
Tried removing and rediscovering all USB drivers for both machines.
I've tried everything I could think of, and in every order I could think of.
The OS discovers the device, and ultimately gives me a popup message that the USB device is installed correctly and ready for use, but then 10sec later I get "USB Device Not Recognized" pop up error....
Should I roll back to a previous version of Activesync? Can I roll the ROM back to a previous version?
I admit to surveying the forums here before posting, but it seems a bit confusing to me and I certainly don't want to destroy my phone.
Thanks in advance for your help!
jdtarch said:
Good Morning!
Well, I upgraded the ROM on my (previously) Cingular 8525, two days ago, and continue to fail at getting it recognized by both my Dell M170 laptop and my Alienware Area51 Desktop via USB.
Activesync 4.5
Tried it with both Advanced Network Functionality and without.
All firewalls off.
No errors during ROM update.
Tried two different USB cables.
Reinstalled XPpro SP2, fully patched.
Tried removing and rediscovering all USB drivers for both machines.
I've tried everything I could think of, and in every order I could think of.
The OS discovers the device, and ultimately gives me a popup message that the USB device is installed correctly and ready for use, but then 10sec later I get "USB Device Not Recognized" pop up error....
Should I roll back to a previous version of Activesync? Can I roll the ROM back to a previous version?
I admit to surveying the forums here before posting, but it seems a bit confusing to me and I certainly don't want to destroy my phone.
Thanks in advance for your help!
Click to expand...
Click to collapse
what os is running on your computer?
XPpro SP2 fully patched
jdtarch said:
XPpro SP2 fully patched
Click to expand...
Click to collapse
do you have .NET framework 2.0 installed?
edit removed questions that were answered in first post (guess I should read closer)
Did you flash a WM5 or WM6 rom?
I have issues with AS not being able to connect to my device sporadically when I am running WM5 roms but don't have issues at all with WM6 roms. I have no idea why this is but this problem goes away for me while running WM6.
Can you boot into bootloader and get a constant USB connection that way? if so you may be able to flash to another custom rom or shipped carrier rom.
And I know you said you already did this but uninstall and re-install activesync 4.5 to make sure its drivers are not corrupted. Select yest to overwrite when prompted (if prompted).
Hi,
I have a problem with my HD2 (UK). I search and read of the forum and found that others had the same problem but I couldn't find any solution that works for me.
I flashed the Artemis ROM version 28. Before that on I used to have a Dutty version. The phone became very unstable and it even hard reset itself. After some time it stopped booting after a hard reset. It freezes in the welcome page or network selection page. At this stage it is impossible to connect via ActiveSync.
I tried to re-flash radio, ROM or even to perform a Task 29 but nothing works because when I boot into the bootloader and connect the phone to the USB, the "Serial" connection does not change to "USB" therefore nothing works.
I have HSPL v2. In the bootloader it says: SPL-2.08.HSPL
I believe (not 100% sure) that the radio version is: Leo_RADIO_2.12.50.02_2
Is there a chance I can solve this?
Thank you!
have you tried flashing from the sd card yet?
Not yet. I need to find an microSD to SD adapter as I cannot access the card using the phone.
Thanks!
Hello again,
I solved the problem. I tried to use USB from the bootloader using a different PC. It worked. I flashed HSPL3, radio and the Artemis ROM and it work fine now.
Thank you!
xerxes_ro said:
Hello again,
I solved the problem. I tried to use USB from the bootloader using a different PC. It worked. I flashed HSPL3, radio and the Artemis ROM and it work fine now.
Thank you!
Click to expand...
Click to collapse
Glad you got it fixed. Thread closed
Hi guys. I am in need of a little help.
This started last night. My HD2 has SPL-1.42 and has done since it was released. I am not a noob at flashing roms or indeed running Android Roms. I regard myself as being a bit of a geek and a bit technology savvy. Anyway....
Last night I flashed a new Rom (Energy.Leo.21916.Sense2.5.Cookie.sencity.Nov.30) all was going well. I flashed this rom as I liked previous roms by this chef and also to try and solve my email not being received problem. Unfortunately, emails still didn't work. Not a problem I thought, I will just used Android for my emails. Unfortunately for me the build I installed last night after installing the Energy Rom was slow and laggy for me. So I thought to myself that I would install a new WM rom this evening and the latest MDeejay Android Rom afterwards. So I went about the usual scenario of connecting my HD2 to Laptop in activesync mode(without Enable Faster Connection enabled(this is normal for me) but all I get from Windows is USB Device not recognised. I have tried with enable faster connection enabled, reinstalling Mobile Device Centre, different cable, different USB port, different PC, reflashed a rom via SDCard(transfered LEOIMG to SDCARD via adapter and run from SPL Bootloader). I even get the error when running Android. I have also checked the USB port on the HD2 for dirt, but nothing.
Can anyone suggest anything or is my HD2 knackered?
Thank you
Seg