I just flashed to R4 today, and under Settings > Connections > Connections there's no option to add in a network connection to connect. Is there a step I missed, or is it because I took out the data timer?
You need to load the carrier CAB for you specific carrier. It should be in the ROM pack.
Thanks, I wasn't aware carrier cabs needed to be reinstalled when you flashed
lsdlsdlsdlsd said:
Thanks, I wasn't aware carrier cabs needed to be reinstalled when you flashed
Click to expand...
Click to collapse
Page 1 of scott's reloaded 4 thread have full instructions about installing the carrier cab after flashing the rom
Related
Please forgive me if I am posting this in the incorrect location, I am new to this. I have searched threads and google for an answer, I have not been able to find one.
I used the 2.40 unlocker
I flashed my xv6800 with Radio 3.35.04 and ROM 3.35.651.2
I preformed a soft reset prior to Sprint Customizations
Phone booted no problem
Dialed *228 Option 1 - Worked Phone incoming/Outgoing Works Fine
Dialed *228 Option 2 - Worked Phone Reports PRL Version 51056
Phone shows a Sprint PCS Connection, tried to delete, wont delete, don't think this is a problem
Added a Verizon Connection and chose it as default
Verizon Connection -
Modem - Cellular Line
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
Use Server Assigned IP
Use Slip - Unchecked
Use Software Compression - Checked
Use IP Header Compression - Unchecked
Use Server Assigned Addresses
Proxy - This Network Connects to the Internet
Error Report - Cannot connect for an unknown reason
Any ideas?
Thanks in advance
I'm having a similar issue but with dcd 3.2.0 and radio 3.42. I've made my own connection with the correct info and I get the same error... I'll be interested to hear any solutions/suggestions.
try ##778 then send or # depending upon the rom.
go to view , security. in there check your usernameand password. normally password is dec esn of your phone.
Did you run the Verizon Carrier cab? I bet you didn't. If not, then the phone doesn't have the encrypted handshake code or whatever it uses to access the data network. Run the Verizon carrier cab and reboot the phone and see if it works then.
Tried....
Got rid of the Sprint connection, all setting appear correct, same error though
mikenra said:
Got rid of the Sprint connection, all setting appear correct, same error though
Click to expand...
Click to collapse
even if you ran the carrier cab once, you are supposed to run it again after activation someone said if you were having data issues.
if that still doesn't help, you may need to manually add/edit your shared secret keys for the data.
Please read this thread and see if it helps:
http://forum.xda-developers.com/showthread.php?t=398016#5
Im sorry, I mean I tried it after you suggested it, after activation (*228 is activation, correct?) Im going to check out the link, thank you
to get data on verizon
I might be wrong, but instead of
Dial - #777
User Name - (Phone Number)@vzw3g.com
Password - vzw
Domain - Empty
what works for me is
username - phone#
password = vzw3g
Hi guys,
few days ago I've decided to move forward with Fusion Update 7 ROM to Fusion Update 8. Procedure was about normal beside the fact I had also purged SD card. Upgrade went well, but:
I cannot get mobile connection
No SMS can be sent
No matter which ROM/RADIO I had flashed after my previous move everything beside those two is working. So I can get WIFI connection or receive SMS, I can also call and receive calls.
My configuration:
- Hardware: HTC HERO GSM (white)
- Recovery: AmonRa 1.7
- ROM: FROYO_2.2_elelinux_v2.2 (at the moment)
- RADIO: 63.18.55.06OU_6.35.15.01 (at the moment)
Additional info:
- SMSC is set correctly (checked using *#*#4636#*#*)
- APN list is correct
- rollback to vanilla 1.5 ROM from RUU not helped
- other SIM cards from other carriers work the same way
I trying to get some debug information using adb, but only thing I can find is that ppp connection is missing in netcfg.
Do anyone know how to initiate Mobile Connection through adb shell ? or anyone get similar problem before?
Thank in advance,
Problem solved. During messing with ROMS my SIM card must been somehow damaged.
After more tries with other SIM cards my phone started to work finally.
You are missing the correct apn settings for your mobile data and also missing or have the wrong SMS service number, have a search on the forums here, or Google and you should find them. Always worth backing these up or writing them down, as not all rom's have necessarily got all providers son's included.
Sent from my HTC Hero using XDA App
Thank you for fast reply.
I checked those before:
SMSC:
- refreshed with *#*#4636#*#* and those looks correctly for my carrier
APNs:
- there where missing fields in APN config which I've updated according to carrier configuration
Still nothing had changed.
I assume that it must be some kind of config that do not change between ROMS.
(I will update first message with those info.)
Did you checked with an other SIM/carrier?
Yes I did.
Effects where the same.
I've also rolled back to vanilla 1.5 ROM from RUU. Nothing changed.
It must be some kind of external configuration that is not changed via ROM replacement. Can this be true?
Thread moved to Q&A.
hey guys, ive tried 3 different ics roms and none of them allow me to use my data any help?
harrygearing said:
hey guys, ive tried 3 different ics roms and none of them allow me to use my data any help?
Click to expand...
Click to collapse
The LPB kernel wipes your apn's.
Go to your carrier's website, or call them, and ask for your apn.
Settings > Wireless and Networks > Mobile Networks > APN
Some people use HiAPN (Market App) as well.
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
snow145532 said:
I'm following the guide http://forum.xda-developers.com/showthread.php?t=1575749 for flashing the evo 3d to page plus from sprint. currently i have the phone rooted with s-off running meanrom. under the instructions it says you need to enter the MSID on the phone and if you don't have it to call your service provider. I called page plus and they say that they can't give me a MSID without the phone being activated on their service. I'm not sure what to do next. Do I give them the new ESN and have the change the service and then will they be able to give me the MSID or is there another method to do this?
Thanks for any help.
Edit: i'm currently on page plus with a old lg 9100 and the phone i'm trying to flash is a sprint phone that has never been activated.
second question: the apn backup and restore app says that APNS cannot be restored or deleted on this device because android 4.0+ does not allow 3rd party apps to write apn settings. what should I do to get this to work. i have the phone rooted with s-off currently running meanrom. should i put a different rom on there?
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Jsparta26 said:
Have you flashed the page plus prl yet? If so you need to call them and give them your esn number. I believe the msid is for if you want to port your number over first before you call page plus. If you followed the guide to a T up until the apn part. Even though apps won't allow you to write to the apn, its ok because all your gonna do is delete and restore. Put your phone in airplane plane mode. Delete your current apn, click restore apn chose the page plus one. Disable airplane mode and reboot. I hope this helps you.
Click to expand...
Click to collapse
thanks, for the input. i'm going to try this a little later today.
so just an update for anyone who might stumble onto this thread. I figured out the steps: (Thanks Jsparta26)
After I flashed the prl, I called page plus and they activated the ESN. The MSID was the same as my phone number. Phone still didn't work, so i reflashed the PRL and then the phone was working. I didn't need to delete the APN, it was just working after. Now phone works for calls and 1x data. no MMS yet, got to figure that one out.
thanks for the help.
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Jsparta26 said:
Your mms is also included in the apn file. Try the delete and restore method to see if works for you
Click to expand...
Click to collapse
I'm getting the message: Unfortunately APSs cannot be restored or deleted on this device because Android 4.0+ does not allow 3rd party apps to Write APN settings.
The Options in the Program are: Backup APNs, Restore APNs, Delete Backup Files, Delete APNs, and Donate.
Not sure what to do from here.
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. If not then manually copy it the apn file with a file explorer into your sdcard and take the page plus file and paste in the original location of the file and reboot. Let me know if that works.COLOR="Silver"]
---------- Post added at 09:39 AM ---------- Previous post was at 09:33 AM ----------
[/COLOR]Which app are you using? Well if it don't work then I have another solution. Do you happen to know the settings of page plus's apn settings? Also do you know your msl code? If so, then open up your dialer and type ##3282# and punch in your msl code under edit. Once your through click on advanced and scroll down to the bottom of the screen and click on mmsc settings. If you know the settings you can manually input the settings in their correct spots. Once you do that hit commint changes or modifications at the top of the screen and hit reboot
Jsparta26 said:
Ignore the part of backup, delete and restore. I was able to do this with an aosp rom and should work with a sense rom. You just cannot write to the apn file. Make a backup of your original apn, delete the current one, then restore using the page plus apn file and reboot. It should work. Let me know if that works for you.
Click to expand...
Click to collapse
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
snow145532 said:
I think I figured it out. In the settings for the program there is an option for "ignore ICS". i selected that and was able to delete and restore. looks like mms is now working, but it still shows 1x data.
Click to expand...
Click to collapse
Speedtest.net
DL: 118kbps, UL: 26kbps, Ping: 810ms
yeah, 1x not so good.
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Jsparta26 said:
Well I am glad that you got mms working. Not sure about the 1x signal, it could be a cell tower issue, not enough cell towers or that page plus's network is low priority. Have you flashed the latest page plus prl?
Click to expand...
Click to collapse
plenty of cell towers here, so that shouldn't be a problem. i'll try and flash the other prls and see what i get (right now i'm running the one from the main thread included in the rar). in the main thread i think there were problems with people not getting 3g. if i can't solve it with the prls, i'll have to comb through that thread for a solution.
Thanks for your help.
Jordan
No problem. Just keep this in mind. Check to see if your radios are up to date on page plus's firmware. People used to have that problem when they went flash happy with the vm ruu ics leak back in may and messed up their phones with the dreaded 1x signal. Just something to think about. Good luck.
I had custom android 4.2.2 and i reverted to the original 4.1.2 rom. Now mobile data isn't working. The phone was originaly on orange ro now it is on cosmote ro. It worked Before on cosmote with t e original rom and the custom one. I sent an sms and recived setings but it still doesn't work. It says it's activr bot i see no icon in the notification tab.
Any ideea?
Have you tried checking the APN settings?
I have an issue where i flash my phone with SlimROM and then Chrome and Whatsapp is not working on data. Then I realize that the ROM auto select the wrong APN settings. I entered the right APN settings and I have no issue with getting data.
Also check if all the apps are receiving data via wifi first.
ctam said:
Have you tried checking the APN settings?
I have an issue where i flash my phone with SlimROM and then Chrome and Whatsapp is not working on data. Then I realize that the ROM auto select the wrong APN settings. I entered the right APN settings and I have no issue with getting data.
Also check if all the apps are receiving data via wifi first.
Click to expand...
Click to collapse
Wifi works. I'm wrighting from my phone now. The settings where wrong but changing them is the first thing i tried but i didn't work.
I never had thisproblem before even when i flashed custom roms. It feels like it doesn't activate the net even if it says it does.
Got it. I had the settings for gprs and i needed the ones for broadband.
Hi everyone,
Thanks for your comment. It turns out the ROM was selecting the wrong APN by default. I switch the APN and updated the settings. Now it works like a charm