{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have created a kitchen with the latest Alltel 6.1 Rom broke down and added
some of DCD tweaks, some oems from the other guys and put scotts m2d oem
i will be posting pics and a download link later tonight.
This rom was made made me because I could find one that worked well with alltel.
*Requirements:
+ NueSpl 2.47, olipro 2.40/ I reocmend the first as it is much easier to install.
+ Radio 2.3.3x or higher. What I run is 3.42.50
+ Working and hopefully prior exp in flashing custom ROMS.
MMS 5.0.71.33 is working great.
GPS fixes are extremly fast and accurate. After QSPT and OEM.
Battery Life is unbelievable.
For QPST check here: http://forum.ppcgeeks.com/showthread.php?t=36377
21 mb free with M2d off
18 mb free with M2d Enabled
Alltel 6.1 3.52.671.9 base
In OEM Folder
acbToggleBT
AGPS
Baf's GPS Toggler
ClearTemp_v1.0.2
Cyberon Voice Commander_2.0._709191
dcd_settings_a2dp
dcd_settings_appbuttons_titan
dcd_settings_areacodes
dcd_settings_camera
dcd_settings_contacts
dcd_settings_error_reporting
dcd_settings_irda
dcd_settings_keybaord
dcd_settings_network
dcd_settings_nitz
dcd_settings_notifications
dcd_settings_power
dcd_settings_rdp
dcd_settings_securitypolicy
dcd_settings_sms
dcd_settings_sounds
Dialer-Manila 2D_Smart
HTC Action Screen
HTC Album
HTC Audio Manager
HTC BT Quicklink
HTC Youtube QVGA
M2DC
Manila 2D - Scott
OEM_MegaPack_GPS_v1.5
OEM_Megapack_MyUtils_v1.4
I wish to thank the following without whose hard work this ROM would not have been possible.
DCD for his help and tweaks.
scrosler for the use of his tweaked Manila 2D.
PPCGEE*S for some of the OEM's
rstoyguy for some other OEM's
Here is the link to the kitchen: http://rapidshare.com/files/172476921/alltelM2Dkitchen.exe
Here is the link to the flashable rom: http://rapidshare.com/files/172479631/Flashable_Rom.exe
Some asked me to cab up Scotts Manila 2d this is my attempt : http://rapidshare.com/files/172548227/Scotts_Manila_2D.CAB
All my PPC-6800 files: http://rapidshare.com/users/34JA9H
awesome work. its good to see other cooks stepping up. but i do have a favor to ask .... it seems like you were able to get a hold of scroslers' M2D build that he had on R4 rom. would you be able to supply that cab?
what do you mean by:
GPS fixes are extremly fast and accurate. After QSPT and OEM.
Click to expand...
Click to collapse
What do i do with QSPT and OEM?
Not sure about the OEM part, but with QPST you can set the Altel aGPS server info and it will get a GPS sync in under 15 seconds, even inside and usually have more satellites linked than without the aGPS fix.
I'm assuming the OEM is a preset registry change as well, but registry alone isn't enough to get it to work, the QPST part is 99% of it, the registry change only helps once the QPST part is done.
BTC
oh really, i guess i havent check in here in a few months...i thought it was only sprint that was able to do the aGPS stuff.
Whenever I use M2DC to disable the anolog clock, the background squares of the digital clock move to the left and the numbers are all bunched on the right.
Other wise the rom is working great. Similar to R4R, without the SMS/MMS problems. I just have to figure out what all of the programs are.
Is there any way to use the windows media player on the music tab? It seems to not shut down as much when I am using too much ram. If I am doing too much with windows media, at worst it pauses for a few seconds. With audio manager it will either shut down completely or stop, then start the next song when it starts moving again.
can you point me in the right direction for QSPT? i can't find anything specific to alltel...
For QPST check here
http://forum.ppcgeeks.com/showthread.php?t=36377
Nice work! I've been running the official Alltel 6.1 for the past few weeks and have been pleased with it, but have been feeling the need to scratch the "flashing itch" of late.
Question for you. As I said, I have the newest Alltel 6.1 flashed at this point, and I did go into QPST and edit the aGPS. Assuming that this is just a ROM (no radio or anything) my QPST changes should survive a flash, correct? I shouldn't have to do them again? I remember this being debated at one point, but don't remember a resolution.
i used this kitchen, but the resulting nbh file is only 6mb....doesn't right compared to other roms i've flashed. Maybe it is though?
great work on the gps i get gps fixes within 25 sec indoors...
BUGS SO FAR
-If u close an app it stays open (look in the task manager you will see what I mean)
-HTC Audio Manager has a cert error
answerman said:
Nice work! I've been running the official Alltel 6.1 for the past few weeks and have been pleased with it, but have been feeling the need to scratch the "flashing itch" of late.
Question for you. As I said, I have the newest Alltel 6.1 flashed at this point, and I did go into QPST and edit the aGPS. Assuming that this is just a ROM (no radio or anything) my QPST changes should survive a flash, correct? I shouldn't have to do them again? I remember this being debated at one point, but don't remember a resolution.
Click to expand...
Click to collapse
Still works for me I have not done qpst for 2 months and have flashed
more times than i can think of.
answerman said:
Nice work! I've been running the official Alltel 6.1 for the past few weeks and have been pleased with it, but have been feeling the need to scratch the "flashing itch" of late.
Question for you. As I said, I have the newest Alltel 6.1 flashed at this point, and I did go into QPST and edit the aGPS. Assuming that this is just a ROM (no radio or anything) my QPST changes should survive a flash, correct? I shouldn't have to do them again? I remember this being debated at one point, but don't remember a resolution.
Click to expand...
Click to collapse
Thats correct but you never know, I have seen stranger things happen. For the most part you should be good.
thank you for a new rom to play with that has GPS
with the kitchen I keep getting 'Error building default.hv and user.hv!
I dont know what that is, but I clicked ok and it continued on, it flashed but then all the phone loads is to the HTC screen..
not1ofthepack said:
with the kitchen I keep getting 'Error building default.hv and user.hv!
I dont know what that is, but I clicked ok and it continued on, it flashed but then all the phone loads is to the HTC screen..
Click to expand...
Click to collapse
Same thing kept happening to me, so I just ended up re-booting the stock.
not1ofthepack said:
thank you for a new rom to play with that has GPS
with the kitchen I keep getting 'Error building default.hv and user.hv!
I dont know what that is, but I clicked ok and it continued on, it flashed but then all the phone loads is to the HTC screen..
Click to expand...
Click to collapse
just delete the battery program from the oem folder and all is fixed (can't remember the name - im at work so cant check right now)
Bugs
4 days since i flashed my device th e problems i encountered are
Comm Button
youtube player
htc audio manager
i love this rom cook
so some one please help me fix these issues
mettercomputers said:
I have created a kitchen with the latest Alltel 6.1 Rom broke down and added
some of DCD tweaks, some oems from the other guys and put scotts m2d oem
i will be posting pics and a download link later tonight.
This rom was made made me because I could find one that worked well with alltel.
*Requirements:
+ NueSpl 2.47, olipro 2.40/ I reocmend the first as it is much easier to install.
+ Radio 2.3.3x or higher. What I run is 3.42.50
+ Working and hopefully prior exp in flashing custom ROMS.
MMS 5.0.71.33 is working great.
GPS fixes are extremly fast and accurate. After QSPT and OEM.
Battery Life is unbelievable.
For QPST check here: http://forum.ppcgeeks.com/showthread.php?t=36377
21 mb free with M2d off
18 mb free with M2d Enabled
Alltel 6.1 3.52.671.9 base
In OEM Folder
acbToggleBT
AGPS
Baf's GPS Toggler
ClearTemp_v1.0.2
Cyberon Voice Commander_2.0._709191
dcd_settings_a2dp
dcd_settings_appbuttons_titan
dcd_settings_areacodes
dcd_settings_camera
dcd_settings_contacts
dcd_settings_error_reporting
dcd_settings_irda
dcd_settings_keybaord
dcd_settings_network
dcd_settings_nitz
dcd_settings_notifications
dcd_settings_power
dcd_settings_rdp
dcd_settings_securitypolicy
dcd_settings_sms
dcd_settings_sounds
Dialer-Manila 2D_Smart
HTC Action Screen
HTC Album
HTC Audio Manager
HTC BT Quicklink
HTC Youtube QVGA
M2DC
Manila 2D - Scott
OEM_MegaPack_GPS_v1.5
OEM_Megapack_MyUtils_v1.4
I wish to thank the following without whose hard work this ROM would not have been possible.
DCD for his help and tweaks.
scrosler for the use of his tweaked Manila 2D.
PPCGEE*S for some of the OEM's
rstoyguy for some other OEM's
Here is the link to the kitchen: http://rapidshare.com/files/172476921/alltelM2Dkitchen.exe
Here is the link to the flashable rom: http://rapidshare.com/files/172479631/Flashable_Rom.exe
Some asked me to cab up Scotts Manila 2d this is my attempt : http://rapidshare.com/files/172548227/Scotts_Manila_2D.CAB
All my PPC-6800 files: http://rapidshare.com/users/34JA9H
Click to expand...
Click to collapse
mettercomputers thanks for the cabbing up Scotts M2D! I'm going to test it out now.
edit:
just tested the cab and i get this message "installation was unsuccessful. the program or setting cannot be installed because it is not digitally signed with a trusted certificate." i have an XV6800 running DCD's 3.3.4 ... its unlocked... soooo...... any ideas?
i love this rom, please keep this one tweaking
good rom i tested on vzw works great and fast and really fast with some of the stripping i did
Related
Here is a Verizon ROM cooked by me.
OEM taken from official ROM 2.09.605.8 (vzw).
Drivers are from officlal ROM 2.17.651.0 (sprint). BT drivers are from Sprint Vogue.
The bluetooth sound, alarm, and keyboard issues that may be present in the stock vzw rom should be resolved.
Newer WM6 OS:
CE OS 5.2.1622 Build 18128.0.4.4
Added Windows Live and a few of my reg tweaks
Removed Autoupdate, SQM
Changed to 5mb pagepool
Will not automatically run extrom
~26mb free at boot (after a min)
OS only. This ROM will not upgrade your radio.
Radio 1.40.00 may be used to upgrade separately.
You must install Hard-SPL (unlocker) before flashing this ROM.
I threw this together in free time. I will not support it, I will not update it, I will maybe never look at this thread again. I hope it works well and you like it...if not build one with a kitchen!
LINK: RUU_TITAN_VZW_WWE_2.17.000.1_dcd.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-
-
reserved..
What does "CE OS Hybrid" mean on some ROM I see?
Hiromitsu Kino
illuminarok said:
What does "CE OS Hybrid" mean on some ROM I see?
Hiromitsu Kino
Click to expand...
Click to collapse
probably that the xip/kernel (CE OS 5.2.1933) is not matched to the appropriate SYS files (Build 18533.0.7.0)
this is not a hybrid build. lets please keep this thread on topic, if you have questions about other roms ask it in their threads, thanks.
I am very sorry.
I am completely new to this and have not been able to find anything that is resemble a guide for beginners or anything to explain various terms etc.
But my phone is VZW XV6800. Is it ok to install new radio rom along with this rom for VZW Titan or do I need to wait for one made special to it? (verizon)
Thanks
Hiromitsu
illuminarok said:
I am very sorry.
I am completely new to this and have not been able to find anything that is resemble a guide for beginners or anything to explain various terms etc.
But my phone is VZW XV6800. Is it ok to install new radio rom along with this rom for VZW Titan or do I need to wait for one made special to it? (verizon)
Thanks
Hiromitsu
Click to expand...
Click to collapse
no problem. you just have to search alot this is a rom made specifically for your verizon XV6800 device. any titan rom should work, but this is verizon's ROM, with its OS version upgraded. you should be able to install radio 1.40.00 as well.
Is this kind of B-T fixed ROM avalable for Telus P4000
I DCD. May be i've not done enought research before asking but is this kind of ''Upgraded'' Rom is avalable for P4000. I did'nt flash for a custom yet waiting for an official kitchen, 'cause this Rom work very fine altough for B-T freezing issue. It's the only reason why i had to soft reset in 6 month never crash for memorie over-use. So If an easy way to fix (change) the blue-tooth driver in the stock ROM, already existe. It's a good way to wait for an official kitchen....
Thank for understanding....;-)
This oughta make quite a few of the XV folks happy! Good job!
Alex_electro said:
I DCD. May be i've not done enought research before asking but is this kind of ''Upgraded'' Rom is avalable for P4000. I did'nt flash for a custom yet waiting for an official kitchen, 'cause this Rom work very fine altough for B-T freezing issue. It's the only reason why i had to soft reset in 6 month never crash for memorie over-use. So If an easy way to fix (change) the blue-tooth driver in the stock ROM, already existe. It's a good way to wait for an official kitchen....
Thank for understanding....;-)
Click to expand...
Click to collapse
you could build a bt-fixed telus rom with my kitchen... but if i get time, ill do the same i did here for you guys on telus.
Is it not different signals for my carrier with radio driver? Have Verizon improve their radio driver compared to the sprint mogul anyway? I'm so confused...
What are the benefits of dropping my VZW radio for this 1.40.00 radio driver? Is it really safe to use on a VZW phone?
Thanks again
Hiromitsu
radio 1.40 is safe to use. its just newer. i believe we first saw it with the 2.14 ROM. verizons XV6800 came with 2.09. its up to you whether you want to flash the radio. all htc titan devices are cdma and use the same cdma radio, 1.40.00 is a software version for the radio.
Oh, that is very nice. Thank you for the information about this dcd and thank you for the delicious meal that you have prepared. I will go find Radio 1.40.00 now, thank you very much.
Hiromitsu
Flashing now thanx dcd...
Ehh: Decided to try your latest kitchen..
thank you much dc. anyone have a link to the shipped verizon rom? just for safty if anything.
dcd1182 said:
Here is Verizon ROM 2.09.605.8 cooked by me
Drivers and XIP brought up to 2.17 from Sprint ROM. BT drivers from Sprint Vogue.
New updated WM6 OS:
CE OS 5.2.1933
AKU 0.7 Build 18533.0.7.0 SYS
Verizon 2.09 OEM
Added Windows Live and a few of my reg tweaks
Removed Transcriber, Autoupdate, SQM
Changed to 5mb pagepool
Will not automatically run extrom
No radio, no SPL, no splash... OS only.
~26mb free at boot (after a min)
Click to expand...
Click to collapse
Few more, quick, question...
Why always remove Transcriber? Its nice to have handwriting recognized, dont you think?
What is Autoupdate and SQM?
Isn't 8mb pagepool said to be better tradeoff?
Thanks!
Hiromitsu
illuminarok said:
Few more, quick, question...
Why always remove Transcriber? Its nice to have handwriting recognized, dont you think?
What is Autoupdate and SQM?
Isn't 8mb pagepool said to be better tradeoff?
Thanks!
Hiromitsu
Click to expand...
Click to collapse
Transcriber is device-specific and so I could include the original aku0.2.3 files, but I just left it out, as I cant bring over the 0.7 version. (I think)
Autoupdate=Windows Update
SQM=Customer Feedback, Customer Experience
I've tested pagepool sizes and 8mb is faster, but I found 5mb to be the best tradeoff. an 8mb pagepool would severely decrease your available ram, and hardly give a noticable performance increase. Alot of people like 4mb as well.
dcd1182 said:
Transcriber is device-specific and so I could include the original aku0.2.3 files, but I just left it out, as I cant bring over the 0.7 version. (I think)
Autoupdate=Windows Update
SQM=Customer Feedback, Customer Experience
I've tested pagepool sizes and 8mb is faster, but I found 5mb to be the best tradeoff. an 8mb pagepool would severely decrease your available ram, and hardly give a noticable performance increase. Alot of people like 4mb as well.
Click to expand...
Click to collapse
Oh I see, that's a pity. I wonder, there is no way to get this Transcriber out of my own device for to have hadwriting recognition? That would be ideal, I think. If not, that is good too. Well, thanks for the explaination... No want any but transcriber haha
Have a good day
Hiromitsu
Help!
This is the first time I've used any custom ROMs, so please forgive the ignorance. I unlocked my xv6800 and flashed with Radio 1.40, and everything worked great. Now, however, when I try to make a phone call, I get a verizon msg saying that they cannot authenticate my phone. My SPL is still unlocked--is that the problem? I reprogrammed the phone, and it notices that the SPL is unlocked. If that is indeed my problem, how do I lock it again?
Call verizon and tell them u hard reset and now your device cannot authenticate.
Well, it took 3 levels of customer support at Verizon before I got to the one who could help, but they fixed the problem. Now, Radio 1.40 is on and working. Thanks!!!!
I take no responsibility for anything you do to your device.
dcd's titan rom:
CHANGED:
Power Management
Dialer
Commmanager
Calculator
Relaxed security
Volume tweak
Touch-like skins
MMS included if carrier supports it
UC Compatible
REMOVED:
SQLCEMobile
Entertainment (Games)
HTC Homeplug
Windows Live
Adobe Reader
HTC Zip
Jbed Java
KNOWN ISSUES:
Encryption had to be completely removed to be fixed.
PIE will NOT work with cache located on storage card. WM6.1 bug.
no2chem has fixed alot of WM6.1 bugs and helped me alot with my XIP. If not for him,
this rom would be incomplete or broken. If you like my work, remember to thank him also.
1.7.0: 02-27-08 WM 6.1 CE OS 5.2.19199 Build 19199.1.0.0
Kitchen:
Download
Also requires: Visual C++ 2008 Runtime
ROMs:
Coming later
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SPL 1.20-olipro is REQUIRED.
This rom will ONLY work with an unlocked device. Unlock your device before continuing.
NO radio is included. RADIO 3.27.00 IS NOT COMPATIBLE!!
These radio ROMs ARE compatible:
1.30.60 (verizon original)
1.32.00 (sprint original)
1.40.00 (recommended)
1.47.00 (bugs & lockups)
1.47.01 (bugs)
1.59.10a (from vogue)
2.06.0D (from vogue)
2.13.0D (from vogue)
A device with incorrect radio version will freeze at the first splash screen. Manually enter bootloader (camera+power+reset) to flash the correct radio.
Thank you:
no2chem, ImCoKeMan, bepe, tadzio, dogguy
foetus, lotekjunky, sleuth255
If you experience problems, please include specific directions on how to reproduce the problem in your post.
If the issue can be confirmed, it will be acknowledged in post 1 as a known issue.
here is my changelog since my last release, 1.6.10
Code:
1.7.0
- 02-23-08 Updated to WM6.1 CE OS 5.2.19199 Build 19199.1.0.0
- 02-23-08 Adpoted parts of Bepe's new kitchen:
new buildos, new createrom, g'reloc is now part of batch
- 02-23-08 sprint build no longer gets mms (broken)
- 02-23-08 modified browser.dll\S000 to fake useragent (sprint sites need it)
- 02-23-08 removed OEM_Flashdrv.dll and regentries. Extrom is there, but invisible.
still need to modify flashdrv.dll to actually consume extrom space.
- 02-23-08 changed pagepool to 5.23mb
- 02-23-08 hid encryption cpl and removed filter driver
- 02-23-08 include files for activesync remote display powertoy
- 02-23-08 included UC compatibility
- 02-23-08 replaced battery.dll with 1% increment version (thanks no2chem)
- 02-23-08 removed customer feedback notification (thanks no2chem)
1.6.11
- 01-16-08 fixed voicemail today plugin, was missing 2 exes
- 01-20-08 removed lockstream stuff from boot.rgu and boot.hv
- 01-20-08 moved intellidialer.html out of oem_lang_0409 into smartdialing packages
- 01-20-08 removed OEM_Flashdrv.dll and extrom entries from XIP
- 01-20-08 removed WM6 dialer package, and other dialers now optional
1.6.10
- 01-15-08 removed package OEM_HTC_Camera_4_05_26938_00
- 01-15-08 added package OEM_HTC_Camera_5_07_28987 (vogue..no flash)
- 01-15-08 replaced webview.dll in BROWSING package
- 01-15-08 replaced wavedev driver with Vogue 1.17 version
- 01-15-08 updated package AdobeReader to 2_00_288531
- 01-15-08 added package OEM_HTC_StartupAnimation
post reserved.......
Sorry i know this is a quick reply...but what is the difference with this and the 2.3.2? thanks...you have no idea how much i thank you!
friguy33 said:
Sorry i know this is a quick reply...but what is the difference with this and the 2.3.2? thanks...you have no idea how much i thank you!
Click to expand...
Click to collapse
2.3.X = 3.16 base ROM, 3.27.00 Radio, EvDO Rev A, GPS
1.7.X = 2.17 base ROM, 1.XX.XX Radio, EvDO Rev 0, No GPS
dcd1182 said:
2.3.X = 3.16 base ROM, 3.27.00 Radio, EvDO Rev A, GPS
1.7.X = 2.17 base ROM, 1.XX.XX Radio, EvDO Rev 0, No GPS
Click to expand...
Click to collapse
oh sorry, now i feel dumb. thanks
dcd, you are the MAN! I have been anxiously waiting for this. I tried to install but my battery was less than 50%. I'll flash as soon as I can!
can't wait for the ROM
heck yea, been waiting on this. downloading as we speak...
hmmm olipro 1.10 or 1.20?
edit: i'm an idiot. nevermind
Works like a champ so far! Thanks dcd!
OK, I know this can be done, I have done it!
Packaging it up, I need to convert some of my cabs to toss them in the OEM, I cant find the program I used to do that, I think it was in my old laptop when it self-destructed a hard drive... Anyone have a clue how to get this done?
After flashing this rom I can't establish a data connection.
Here's the "upgrade" path I've taken on my vzw xv6800.
Stock -> Olipro 1.20 -> 1.40.00 radio -> various dcd 1.6.x roms and others -> Olipro 2.40 -> 3.27.00 radio -> various dcd 2.x.x roms and others -> Olipro 1.20 -> 1.40.00 radio -> dcd 1.7.0 rom.
I've never needed an A-Key or had a problem with voice or data after a flash.
The data connection seems to reject any username/password I enter. I've tried using u:<number>@vzw3g.com p:vzw, and leaving both blank and checking "save password", neither work.
I can make/receive calls fine, IOTA seems to work fine.
I've tried flashing a rom with dcd's BuildOS defaults, and one with only a carrier change to vzw, same behavior with both.
I've found one other person that followed the same upgrade path, and has the same problem, in this post.
Any ideas?
OK, got my ROM built and the cab thing worked out. However, my unlock code isnt unlocking my Mogul now.. I'm lost at this point.
DCD 1.7 kitchen, radio 1.40 Sprint
The ##775# doesnt work, Nor do any of the other codes I have. I can't call sprint because I dont have another phone right now. It seems like something is missing...
FZ1 said:
After flashing this rom I can't establish a data connection.
Here's the "upgrade" path I've taken on my vzw xv6800.
Stock -> Olipro 1.20 -> 1.40.00 radio -> various dcd 1.6.x roms and others -> Olipro 2.40 -> 3.27.00 radio -> various dcd 2.x.x roms and others -> Olipro 1.20 -> 1.40.00 radio -> dcd 1.7.0 rom.
I've never needed an A-Key or had a problem with voice or data after a flash.
The data connection seems to reject any username/password I enter. I've tried using u:<number>@vzw3g.com p:vzw, and leaving both blank and checking "save password", neither work.
I can make/receive calls fine, IOTA seems to work fine.
I've tried flashing a rom with dcd's BuildOS defaults, and one with only a carrier change to vzw, same behavior with both.
I've found one other person that followed the same upgrade path, and has the same problem, in this post.
Any ideas?
Click to expand...
Click to collapse
You have previous data session active from other ROM build. So your account is still logged in on verizon server.
It's like IRC when you get disconnected from internet, then reconnect and login to IRC and see your previous name is still in the channels. You need to wait a bit for it to "timeout".
Have to either call verizon and have them kick off the ghost, or turn off your phone, take the battery out, and wait about 20 minute.
Goodluck!
Hiromitsu
Nice work
First off, thank you for putting this out. I had been trying to build my own 2.x base WM 6.1 ROM, but didn't have much luck. Yours seems to work very well.
Is this a 2.14 base? I built a custom rom in the kitchen and when it boots up it has "D 2.14" rather than 2.17.
I also noticed that this build is very good at reclaiming RAM. I get about 23mb free on boot. I opened tons of apps to get it down to about 7mb and then closed them all and Oxios got me back to 22mb.
FZ1 said:
After flashing this rom I can't establish a data connection.
Click to expand...
Click to collapse
I have had to reprogram my device every time I go from radio 3.27.00->1.xx.xx
I would suggest you call VZW and play dumb and they should walk you thru whatever needs reprogramming.
stroths said:
Is this a 2.14 base? I built a custom rom in the kitchen and when it boots up it has "D 2.14" rather than 2.17.
Click to expand...
Click to collapse
I happenned to have a dumped 2.14 XIP handy when I decided to make the 19199 XIP and I am that lazy so it went into 2.14. OEM however is from 2.17.
stroths said:
I also noticed that this build is very good at reclaiming RAM. I get about 23mb free on boot. I opened tons of apps to get it down to about 7mb and then closed them all and Oxios got me back to 22mb.
Click to expand...
Click to collapse
I think initvmmap and loadhigh additions to XIP in 19199 are doing this for us.
Wierd issue. when I try to make the rom using your kitchen Im getting an error. Im not adding any OEMs or anything to it. just stock stuff you have in it.
illuminarok said:
Have to either call verizon and have them kick off the ghost, or turn off your phone, take the battery out, and wait about 20 minute.
Click to expand...
Click to collapse
Thanks for the idea, but after removing the battery for 30 mins, still no data.
dcd1182 said:
I have had to reprogram my device every time I go from radio 3.27.00->1.xx.xx
Click to expand...
Click to collapse
Great to learn, that's useful info. Called vzw and played dumb, they "reprovisioned" my data, data's working great again.
Thanks again dcd!
Wierd issue. when I try to make the rom using your kitchen Im getting an error. Im not adding any OEMs or anything to it. just stock stuff you have in it.
dcd,
will the 2.13.OD radio
work on vzw ??
I tried the 2.06.OD &
it seems to work ok.
Edit:
The 2.13 works great.
jbh00jh
Thanks
I take no responsibility for anything you do to your device.
NEW: Please read the wiki page first.
dcd's titan rom:
CHANGED:
Power Management
Dialer
Commmanager
Calculator
Relaxed security
Volume tweak
Touch-like skins
MMS included if carrier supports it
Mortscript included
UC Compatible
REMOVED:
Encryption
SQLCEMobile
Entertainment (Games)
HTC Homeplug
Windows Live
Adobe Reader
HTC Zip
Jbed Java
KNOWN ISSUES:
Jeodek Java still needs to be updated.
3.1.6: 6-15-08 WM 6.1 CE OS 5.2.19214 Build 19214.1.0.4
Kitchen:
Mirror 1
Mirror 2
Also requires: Visual C++ 2008 Runtime, .net framework 2.0
ROM:
Mirror 1
Mirror 2
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hard-SPL 2.40-olipro is REQUIRED.
A device with SPL 1.20-olipro will constantly reboot with this rom!
NO RADIO IS INCLUDED. RADIO 1.XX, 2.XX, and 3.27 ARE NOT COMPATIBLE!!
Radio ROM 3.35 or later is required.
Thank you:
no2chem, ImCoKeMan, bepe, tadzio, dogguy
foetus, lotekjunky, sleuth255, gcincotta, halfdriven
BIG thanks to N715DP for the great webhosting!
If you experience problems, please include specific directions on how to reproduce the problem in your post.
If the issue can be confirmed, it will be acknowledged in post 1 as a known issue.
changelog
Code:
3.1.6
update to OS 5.2.19214 AKU 1.0.4
update sounds (from diamond)
update mxip_notify.vol (remove ceipui)
convert some OEMDrivers to modules
3.1.5
change WindowsLive package (19213+ compatible)
restructure XIP (only moved OEMXIPKernel = easier MSXIPKernel porting in future)
include SYS\ppgprov
include SYS\SIM_Tkit
include SYS\VoiceCommand, with provxml for "BTAGExtModule"="vcbthag.dll"
update to OEM_HTC_TaskManager_2_1_33556_1
removed OEM_HTC_VoicemailTodayPlugin
fixed option.xml in Adobe Reader OEM
fixed OEM_HTC_Phonecanvas_titan335
change back to 3.16 RUU (starts faster)
disabled IPv6 driver
disabled Software Disable Service
removed fatcachesize key
changed datacachesize=80
3.1.4
update OEM
* scrapped (reverted to previous before next build)
3.1.3
replaced custsat.dll with no2chem's version
replaced battery.dll with no2chem's version
replaced WindowsLive packages with WindowsLive_10_6_0034_0800
removed Sprint Navigator
created OEM_HTC_AVDecDll_1_00_071011_0
fixed OEM_HTC_DShow_1_00_070613_0
created OEM_HTC_MFCDLL_1_0_20060406_0001
created OEM_HTC_mHub_6_37_070320_X0
created OEM_HTC_MyCPL_3_13_0_0
created OEM_HTC_ShareDLL_2_0_070711_0000
bugs reported:
MrTek said:
I tried an OBEX File transfer over Bluetooth to my wife's phone after I flashed to 3.1.6 on mine. As soon as I start the "search..." it freezes up and I have to soft reset.
I tried using the "Beam.." in The File Explorer, or Send via Bluetooth with Total Commander with the same result.
Click to expand...
Click to collapse
Oh, great! You guys are going to get me fired.
Seriously, can't wait to get a chance to flash this and check it out!
You are the best.
Ivan
YOWEEEEEEEEEE thanks guys - firing it up now!!
Downloaded...Flashed...No issues
Autorun just finished, and phone is ready to be played with!
Thanks DCD!
BTW: After Flash and everything installed 21mb free in memory
Awesome.
Is the carrier cab the same as the one posted in 3.1.2?
no need to download a new one, correct?
Thanks! I have a question about backing up settings:
If I export my registry and turn in into a cab, under 3.1.2 then a run the cab on an updated version would I run into problems?
Thanks DCD!!
Impressions:
- Much quicker than the previous release
- Windows Live works (yay)
- Task Manager 2.1 update was not followed through in provxml (still reads x-button 2.0)
flashing today, will post tomorrow!! going bowling right now!!
thanx DCD
Thank you, very very much! Awesome job, everytime!!
Flashed, backup restored. So far so good.
Thanks DCD!
Well, I've held out since 3.04 and radio 3.27... I guess now is a good time to upgrade with these changes/fixes.
I'm a VZW XV6800 user; should I upgrade the radio or rom first?
edit- I can someone point me in the right direction on how a Verizon user needs to upgrade the radio to 3.49? I cant find the thread
not entirely shocked at much of the improvements.
19214? Hardly amazing since 19213 on 3.1.2, unless you can give me some info on anything important on this update. Otherwise id hold off till 3.2.x
ranmasaotome510 said:
not entirely shocked at much of the improvements.
19214? Hardly amazing since 19213 on 3.1.2, unless you can give me some info on anything important on this update. Otherwise id hold off till 3.2.x
Click to expand...
Click to collapse
i do need a break after this release. i wont be updating again for a little bit.
dcd1182 said:
i do need a break after this release. i wont be updating again for a little bit.
Click to expand...
Click to collapse
sorry if that sounded a bit off note, i didn't want to sound rude, but i just reflashed 3.1.2 and all my apps which toke me half a day to do. So i just dont feel entirely compelled to do this update. Otherwise I've always appreciated your work, amazing stuff.
And ill be taking a break to, ill wait as long as i need to for whatever other updates you have for us .
Side note- DCD, How are you so knowledgeable on making your own ROM and everything that evolves making it? were you a phone ROM Engineer at one point or something? Something Ive been itching to ask, and the right moment, seeing you've actually quoted something i wrote! i said to myself, w00t~ Chance!
Love ya DCD ^_^
1 more question, aside from Diamond sounds that i see you've included in 3.1.6, well we see more diamond additions later on, in the Kitchen?
This may be an stupid question, but does this ROM update the PRI and PRL? Looking at your "Device Information" screen capture I am out of date on both.
~Mask~
For VZW, is MMS support included
awesome
this is my first post here. I am an HTC noob ... Was initially putting off burning a "custom" ROM to my phone when I initially got the phone since all these warnings saying "may brick phone"... But the TELUS ROM sucked so bad I couldn't take anymore rebooting my device every few days and resynching my Windows Live every time I rebooted since it would bust each time (i use Live to manage my contacts)... So far this ROM looks good. Looks to be running quite fast.
All that to say, thanks DCD ... You have helped to make my phone a worthy purchase. Since using your ROM's, the only time I need to reboot my device is if my memory is getting low (memory leaks), and even that is not often. I even went ahead and donated a little sum to you for your work ( I have never done that before either).
Thanks again.
dcd1182 said:
i do need a break after this release. i wont be updating again for a little bit.
Click to expand...
Click to collapse
Good to see another ROM from you dcd.
Take your break, you've earned it. Maybe by time you get back VZW will have released their update for the XV6800 for you to work with.
Download just finished, gonna be flashing in a few. I'll post about my results in a bit.
I take no responsibility for anything you do to your device.
NEW: Please read the wiki page first.
dcd's titan rom:
CHANGED:
Power Management
Dialer
Commmanager
Calculator
Relaxed security
Volume tweak
Touch-like skins
MMS included if carrier supports it
Mortscript included
UC Compatible
REMOVED:
Encryption
SQLCEMobile
Entertainment (Games)
HTC Homeplug
Windows Live
Adobe Reader
HTC Zip
Jbed Java
KNOWN ISSUES:
Jeodek Java still needs to be updated.
3.2.0: 6-24-08 WM 6.1 CE OS 5.2.19958 Build 19958.1.2.0
Kitchen:
Mirror 1
Mirror 2
Also requires: Visual C++ 2008 Runtime, .net framework 2.0
ROM:
Mirror 1
Mirror 2
Kitchen-Built and Pre-Built ROM *BOTH* require a carrier cab:
Alltel
Appalachain Wireless
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Carrier cabs last updated 07-06-2008
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hard-SPL 2.40-olipro is REQUIRED.
A device with SPL 1.20-olipro will constantly reboot with this rom!
NO RADIO IS INCLUDED. RADIO 1.XX, 2.XX, and 3.27 ARE NOT COMPATIBLE!!
Radio ROM 3.35 or later is required.
Thank you:
no2chem, ImCoKeMan, bepe, tadzio, dogguy
foetus, lotekjunky, sleuth255, gcincotta, halfdriven
BIG thanks to N715DP for the great webhosting!
If you experience problems, please include specific directions on how to reproduce the problem in your post.
If the issue can be confirmed, it will be acknowledged in post 1 as a known issue.
changelog
Code:
3.2.0
update OEMDrivers to Sprint 3.56
update to OEM_Adobe_Reader_2_5_103401_01
update to OEM_HTC_Camera_4_05_30525_00
update to CE OS 5.2.19958 AKU 1.2.0
added more tcpip tweaks
phone screen sleeps quickly when on call
Awesome indeed. I haven't updated since 3.04... this ROM seems a bit faster, and the graphics seem a little more crisp. Is that placebo, or have there been significant updates?
post reserved.
you guys really need to chill, i just needed a few minutes to finish the post up because im extremely busy today.
you are teh awesomeness dcd...
dcd1182 said:
post reserved.
you guys really need to chill, i just needed a few minutes to finish the post up because im extremely busy today.
Click to expand...
Click to collapse
dude no hurry...it's no big deal..i understand your busy.
questions about camera 4.0.5 that says it was updated. Can you explain updates? i liked 5.07, and would be interested in the updates or your opinion of the two.
again...i appreciate all you do. super job
dude thanks! So what are people doing to keep their actual settings after rom flashes?
Like my app defaults and and owner stuff. BTW I need to use UC.
Your da man DCD!!!
You deserve a much needed break!!! Go have some beer!!
is there a newer IOTA .cab than 1128? 1128 appears to be giving me problems.
hoothrewpoo said:
is there a newer IOTA .cab than 1128? 1128 appears to be giving me problems.
Click to expand...
Click to collapse
I assume that if you run the carrier cab, you don't need to run a separate iota cab. I didn't with 3.1.6; haven't tried 3.2.0 yet, but I don't think the carrier cab (for Sprint at least) has changed.
Man I just got 3.1.6 and all my apps all set yesterday... Choices.. choices...
Is there a list of changes / bugfixes in the actual WM6.1 builds somewhere? I searched MS website and Google to no avail.
DCD.. We appreciate your work. Thank you.
FROM DCD's post
Code:
3.2.0
update OEMDrivers to Sprint 3.56
update to OEM_Adobe_Reader_2_5_103401_01
update to OEM_HTC_Camera_4_05_30525_00
update to CE OS 5.2.19958 AKU 1.2.0
added more tcpip tweaks
phone screen sleeps quickly when on call
:::we are not worthy:::
Question for DCD/ GC etc,
are the carrier cabs the same with each release (e.g. do I need to download verizon cab each release, or are they the same)?
P.S. DONATE TO DCD!!!
You can use the same one...if they are updated it will be mentioned.
gc...can you explain the updates in the 4.05 camera. i like 5.07 and have used it, but would like your input and recommendation between the two.
thanks to you and dcd for your hard work on this
Cycomachead said:
dude thanks! So what are people doing to keep their actual settings after rom flashes?
Like my app defaults and and owner stuff. BTW I need to use UC.
Click to expand...
Click to collapse
I use Sashimi. I was a long time user of UC until about 3 weeks ago. Sashimi is a mortscript-based program used to automatically or semi-automatically install cabs, exe files, registry settings, mortscripts, and files. I was having some trouble with xml files during UC. I have about 30 or 40 settings that I use, and the rapiconfig was not consistently making good xml files. My settings change from day to day, so I needed something that would quickly & automatically backup just the settings I play with, and not the other reg settings. If you need help locating your settings, download Cregeditor, and you can use this to find changes in your registry.
DCD 3.2.0
First I loaded the "Ship Rom" and played around for awhile then loaded the new DCD 3.2.0 and noticed no Sprint Navigation or Sprint TV included on his. Something we have to add in on the kitchen?
studentjunk said:
I use Sashimi. I was a long time user of UC until about 3 weeks ago. Sashimi is a mortscript-based program used to automatically or semi-automatically install cabs, exe files, registry settings, mortscripts, and files. I was having some trouble with xml files during UC. I have about 30 or 40 settings that I use, and the rapiconfig was not consistently making good xml files. My settings change from day to day, so I needed something that would quickly & automatically backup just the settings I play with, and not the other reg settings. If you need help locating your settings, download Cregeditor, and you can use this to find changes in your registry.
Click to expand...
Click to collapse
I'm going to give it a try.
Thanks.
ok i think i may have discovered a problem with the new rom and any version of HTC x-button. everything works awesome until i install this app. as soon as a i try and hit land scape mode with the x-button open my entire start menu disappears until a i do a soft reset. i did a hard reset and did not install x-button and i had no issues...
i will reflash and try again but i was wondering if i could get the x-button that came with the latest release in .cab format?
YOUR INTERNET CONNECTION WILL NOT WORK UNTIL YOU INSTALL THE CARRIER CAB!!!!!
Kitchen-Built and Pre-Built ROM *BOTH* require a carrier cab!!!
Carrier cabs can be found here
I take no responsibility for anything you do to your device.
Please see the wiki page first.
dcd's titan rom:
Features:
UC Compatible
Improved Power Management
Touch Themed Dialer
Touch Themed Commmanager
Touch Themed Calculator
Relaxed security Policy
Volume Increase
3.2.2: 7-10-08 WM 6.1 CE OS 5.2.19960 Build 19960.1.2.2
Kitchen:
Mirror 1
Mirror 2
Also requires: .net framework 2.0
ROM:
Mirror 1
Mirror 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hard-SPL 2.XX is REQUIRED.
A device with SPL 1.20-olipro will constantly reboot with this rom!
NO RADIO IS INCLUDED. RADIO 1.XX, 2.XX, and 3.27 ARE NOT COMPATIBLE!!
Radio ROM 3.35 or later is required.
Thank you:
bepe, no2chem, ImCoKeMan, tadzio, dogguy, N715DP
foetus, lotekjunky, sleuth255, gc14, halfdriven
Thanks to N715DP and gc14 for the great webhosting!
changelog:
Code:
3.2.2
update to CE OS 5.2.19960 AKU 1.2.2
update to OEM_HTC_PhoneCanvas_1_0_31335_0
update OEM_HTC_CommManager_10button (IR now WM61 compatible)
3.2.1
BuildNB.bat now checks for .NET v2.0.50727
BuildNB.bat now warns if BuildOS does not run
reverted to BuildOS 0.91, no more VC 2008 dependency
combined Enterprise and IPSECVPN in SYS\option.xml
split SYS\dcd into individual packages
updated OEMXIPKernel to 3.56
update to OEM_Jeodek_Java_0_0_20080521_4_1
remake of OEM_HTC_MyCPL_3_13_0_0
mvoed PhoneSetting stuff from PhoneCanvas packages to MyCPL
moved VoiceCommand setting from OEMDrivers into Cyberon
improved font quality
removed ipv6 devices
removed software disable service
fixed WM6 dialer availability by selecting no dialer packages
removed default timezone package, since its set automatically by NITZ
updated to OEM_HTC_Phonecanvas_titan356
updated to OEM_HTC_PhoneCanvas_1_0_30286_1
updated to OEM_HTC_CommManager_titan356
updated to OEM_HTC_Camera_5_07_30568_0
added IR button to OEM_HTC_CommManager_titan356
Aww man... Here I was thinking I was going to get to have a weekend without flashing my phone! I'm going to wait until Sunday, just so I can have a nice time with my fiance.
Thanks DCD.
DragonPhyre said:
Aww man... Here I was thinking I was going to get to have a weekend without flashing my phone! I'm going to wait until Sunday, just so I can have a nice time with my fiance.
Thanks DCD.
Click to expand...
Click to collapse
You beat me to the exact same comment!!! So much for a relaxing weekend playing with my 3.2.0... Now it'll have to be 3.2.2!!! Keep up the good work DCD!!!
great, i'm looking for this
probably just a typo, but downloaded 3.22 and when build os ran and the msdos prompt was complete, when the pdaphone update screen came up and i clicked "update" it said i was updating to 3.2.1. i know what i downloaded says 3.22, but again, it says 3.2.1 when update is pushed and the checkmark of "all the above steps are down". etc.
thanks
Jason
DCD's 3.22 seems to be working well on Telus with Radio 3.42.30.
After 5 hours on this, no crash yet.
Tested with:
Telus Mobile Email 5.5.07262.0 Build 5.5.7262WM5
HTC Home Customizer 1.0 Final
HTC Home 2.1 Build 1005722
Google Maps 2.0.1.28
TMP with the fix (TCPMP-0.72RC1-ARM-PPC-recomp-03)
BatteryStatus Today Plugin 1.05.132 Beta5 build 0315
Nilisco Flashlight
Thanks again DCD and friends!
jshaas2 said:
probably just a typo, but downloaded 3.22 and when build os ran and the msdos prompt was complete, when the pdaphone update screen came up and i clicked "update" it said i was updating to 3.2.1. i know what i downloaded says 3.22, but again, it says 3.2.1 when update is pushed and the checkmark of "all the above steps are down". etc.
thanks
Jason
Click to expand...
Click to collapse
whoops. i forgot to change "1" to "2" in one file. i'm fixing it, but it will have no effect on the rom.
i know this could be considered off topic and rom flashing doesnt affect this (i think) but how is your PRL 60613? I still have 30031.
if i just go edit my prl to that would that work, and be better?
dcd1182 said:
whoops. i forgot to change "1" to "2" in one file. i'm fixing it, but it will have no effect on the rom.
Click to expand...
Click to collapse
thanks..figured that was all it was. i'll continue with the flash. have a good weekend. i'll be sending you and GC some goodies Monday hopefully.
TCPMP does not work
Great Rom DCD, as always. TCPMP Version 0.72RC1 installed from cab is no longer working. I reflashed to 3.2.0 to verify the cab is good and it worked fine. Back on 3.2.2 it cannot start because of an unexpected program failure.
Is the task manager issue that was in 3.2.0 addressed in this release?
Fix TCPMP
wenhau said:
Great Rom DCD, as always. TCPMP Version 0.72RC1 installed from cab is no longer working. I reflashed to 3.2.0 to verify the cab is good and it worked fine. Back on 3.2.2 it cannot start because of an unexpected program failure.
Click to expand...
Click to collapse
milesmowbray fixed these issues and here is a link to cabs that are functional.
http://forum.xda-developers.com/showthread.php?t=406905
milesmowbray fixed these issues and here is a link to cabs that are functional.
Click to expand...
Click to collapse
Thanks, that one works really well.
Awesome!
Thanks DCD! You seriously just made my day!
*sigh* DCD I can't even keep up with you anymore. Excellent work once again
ok this new ROM is amazingly fast BUT i have a another HTC program issue
this version of HTC Home that i have used since 3.0.4 now completely locks the phone, then it will soft reset it self. (tried hard reset and reflash)
what version does everyone else user and are you having any issues?
peepeesea said:
ok this new ROM is amazingly fast BUT i have a another HTC program issue
this version of HTC Home that i have used since 3.0.4 now completely locks the phone, then it will soft reset it self. (tried hard reset and reflash)
what version does everyone else user and are you having any issues?
Click to expand...
Click to collapse
I am using the one auto downloaded by HTC Home Customizer (link). Great little pogram that lets you customize the look & feel of HTC Home. Have only tested on DCD 3.2.1, but would assume 3.2.2 is good as there are very few changes.
Has anyone else has the all caps issue???