Related
I've just ordered an MDA Vario and it's going to take a little time to reach me (I'm not currently in the UK). Before it gets here I'm trying to work out which screen protector to buy. Has anyone tried the Invisible Shield protector? The material looks superb and I've read load of good things about their performance on iPods.
My current PDA is a Tungsten T3 and I have a Martin Fields screen protector on it. (MF protector for Wizard here).
I love the MF but am really interested in hearing experiences with the IS if anyone on these forums has tried it.
Yeah i want one too but was wondering, do they leave any marks when you peel them off afterwards? From the glue and stuff?
Quality screen protectors like Martin Fields and the IS should leave nothing behind after they're removed.
I think brando screen protector is not bad too. Im currently using it.
I have change 2 screen protector since I got my wizard.
- Expansys, Cant fit in properly. Bubble occur after stick in.
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
For me brando's would be ok. I usually have the store person do the application since I can't do it on my own [I messed up 2 protectors when I tried doing it at home]. I'd say choose one that isn't adhesive but static that way no residue is left on the screen when you remove it. also most of them are washable/reusable... if you find a scratch on the side you use most often [i.e. the area along the SIP] just have it removed and re-installed reversed [not the face but the top and bottom].
The Brando ultraclear is OK. If you prefer a non-glossy one, the Brando regular is perfect (you will lose a bit of brightness).
I like www.boxwave.com 's version
They have a anti-glare, and a regular one, they are washable you can remove them and wash them under soap and water and reapply, they come with cloth cleaner, and a little scraper thing that helps get the bubbles out.
Here's a super cheap solution, and it works GREAT for me.
I went to Staples and bought a package of baseball card protector pages that are designed to fit into a 3-ring binder. The size of each card holder is just slightly larger than the screen on the MDA.
What I did was take a straight edge and X-Acto knife and cut a small piece of plastic that is a couple millimeters larger than the screen on each side. I simply tuck the plastic I've trimmed under the lip between the device and screen, and it holds in place just fine.
No adhesive, no mess, easy as pie, and the entire package of plastic sleeves was less than 3 bucks. It will surely last longer than the life of the device.
- Justin
Got my second Brando regular protector (first one wasn't returned when my magician was replaced). Fits perfect, very scratch-resistant & the anti-glare is very useful while navigating in the car.
Cheers, M
fone_fanatic said:
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
Click to expand...
Click to collapse
Same here.. I have used BoxWave, wich are also very good, but WriteShields from pocketpctechs are great.
I also had an "InvivibleShield" on my 8125 for a couple minutes. I installed it and saw that it was not plum on, so I went to take it off and reinstall.. When I removed it I thought I was going to pull my screen up with the protector. Stay away from those things... I then tested those claims they make on the website, about being indestructible. Pens had no trouble getting through, and scissors went through like soft butter.
$.02
I bought a boxwave and was not happy with the glare free one. I have used them on my Treos and liked them, but the one that came for my wizard sucked. It really blurred the screen and made it look like a prism. Maybe it was defective, but I ended up buying another one from javoedge and I am quite happy with it.
just my $.02
greg
I also got an anti-glare from boxware, it does have issues however I emailed them about it and they are getting a new one that doesn't have the issues and they should have it in about a week. To make it even better they created a gift order for the new one for me.
I've tried a number of the commercial screen protectors in the past and wasn't happy with any of them. Of course, there is the ridiculous cost for a little piece of plastic.
The best solution I have found is to use clear vinyl sheeting that you can find at any fabric store, typically for a couple of dollars US per yard. Just cut to fit your screen, clean your screen, wash your hands and vinyl rectangle with liquid hand soap, shake off as much water as possible (but not all), and attach and smooth out bubbles.
Benefits:
- Minimal screen image degradation as compared to many commercial screen protectors
- No adhesives to gunk up the screen
- Lasts 6 months or so
- Easy to replace
- Costs about a nickle per cover
I also have the pocketpctechs write shield anti-glare.
Comes in a nice kit, can't tell its there when the screen is on.
http://www.pocketpctechs.com/main.asp?unit=Cingular_8125-559&area=home
I bought mine from www.nushield.com, but I haven´t been able to apply the first one to my screen.
I´ve used them on my Handspring Visor Edge and on my Himalaya with very good results, but on the Wizard, I just can´t get it installed. Will keep you posted!
Stefan out
Brando screen protector, Boxwave and Martin Fields are my favorites!
I've heard a lot about this Brando, but it is a bit too expensive for me for a piece of plastic. I think they are selling for GBP7+ in eBay. I wonder, is it so good? I've been looking for those 'card' type screen protector that is ultra easy to apply and bubble free because the protector itself feels like a card. Imagine, since the protector is like a card, it is impossible to get bubble under it. Anyone know where in the net I can get one card type for UK??
BTW, I've bought the 'Sensifilm' protector from eBay. It said many things, but of the two thing, antiglare and antiscractch is 100% bluff. Mine still give me glare and it has been scratched like mad with my stylus. Either the HTC is very bad in designing a stylus, or the screen protector is terribly weak. I think the weak protector is a more likely answer.
30$ for a screen protector. That is so silly. I got a protector for my psp for 6$ and it works great. Geez, pocketpctechs is a rip.
Cant i get some from a local store instead?
I can highly recommend Brando UltraClear too! Easy to attach, not visible when attached carefully, no reduction of brightness - display looks like without one (for those who do not like the reflection of the display: buy the Brando classic).
Regards
Carsten
Has anybody every used this brand of screen protector's before? They just sent me an email saying that they have in stock screen protectors specific for the T-mobile TP2 and I am debating whether or not to buy them.
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I originally had a Martin Fields on my Touch Cruise that I loved, but they don't make the screen protectors for the T-mobile TP2
I used one on my MDA (prior to getting the TP2). I loved it (make sure to get the crystal clear, not the non-glare, if they have a choice). 3 years and looks like new, nice slick surface for using the stylus, extremely durable. But I don't have experience with any others (except the one that came in the TP2 box which I also like a lot).
Thanks for sharing!
I´ll go for one of those
The crystal clear is one of the best I've used before!
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
is the anti glare version kinda gritty to the touch ive never used one?
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
Speaking of anti-glare... im using one on my Iphone 3G..got it back from Manila,Philippines on my last holiday, some chinese brand screen that i thought will be just a piece of crap screen protector.
to my surprise it was 98% perfectly fit on my iphone...and it was a great anti-glare screen protector. my wife likes it now she wants 1 for the htc touch pro2. ive seen some on ebay i might order it this week.
for those who's using one... where did you guys buys the anti-glare screen protector?? -thanks
Arcarsenal said:
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
Click to expand...
Click to collapse
Nice one thanks
I've raved about it before many times, just search my posts on here and PPC geeks, but the BoxWave AntiGlare is the best screen protector for any device hands down period end of story etc!
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
I wouldn't say gritty, but its definitely neither frictionless or sticky and doesn't impede your fingers or stylus movement in anyway... its got a matted texture, and I really like using my stylus with that texture! more of a paper feel, offering just the right amount of feedback and friction.
You do lose a tiny bit of clarity compare to the Crystal version, but for the anti-glare, anti-finger print benefit, I love it!
finger prints and face oil on the stock screen protector have been driving me nuts!
I'm supposed to get it today but heading out of town for a wedding this weekend so may not have a chance to report or upload pix until monday
Thanks for the report, i can imagine a paper texture! i think i may order one. cheers
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
venomshot629 said:
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
Click to expand...
Click to collapse
Personally, the 3M crowd is better because then you don't have to worry about the screen protector getting scratched.
I had purchased a Boxwave Anti-Glare before and it worked decently, but the amount of glare it reduced was negated by the amount of brightness that needed to be increased.
Boxwave, in my opinion, works if you have a case protecting it. But trying doing this with a Boxwave.
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
NOT gritty.
I have used Boxwave screen protectors for years and have NEVER been disappointed. Excellent longlasting product that your stylus simply glides across; I have settled on the Anti-Glare. One post says that Boxwave isn't TOTALLY scratch-free like some other 'full-body' clear protectors. Correct. However, personally I do not like the idea of spraying a liquid all over my device in the application process. 'Full-body' protectors are applied just like installing tinting on you car's windows.
Suggested application procedure.
Before beginning I have two clean microfiber cloths; one is included. Clean your phone's screen well; preferably w/one of those microfiber cloths. Close windows in bathroom, run shower on hot a bit & turn off. Moisture will pull all the dust outta the air and drag it to the floor. Vent heat (u don't want it to be uncomfortable in there).
Now that all the floating dust is negated, clean your screen again w/the the other microfiber cloth and apply protector. It is helpul to have some tape applied to a corner or two of the protector. Utilizing the tape, lift and reapply as needed using the supplied squeegee or a credit card to clear out bubbles; you may need to lift protector and use the microfiber cloth to pick up some lint/debris to ensure a clean install.
You should have a lint- and bubble-free application if you were careful.
Good luck from Lincoln!
I just got the new Boxwave ClearTouch Crystal screen protector for my T-Mobile TP2: http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I had previously had a Boxwave on my MDA. That has lasted 3 years with no signs of wear, and I was extremely pleased with the fit and feel, so was hoping to do the same for my TP2. I researched all of the competition and read many forum posts on the subject. My main criteria were:
1) quality
2) exact fit
3) feel with finger and stylus
4) longevity
Price was less of a concern as I am hoping I will only ever need just the one for my TP2 (if my previous experience with the MDA is anything to go by), and so the lower priced ones, or the ones that came with 2 or 3 in the pack, were not a strong selling point for me.
The other main one I narrowed it down to was the Bodyguardz, and I probably would have got that if the Boxwave hadn't been coming out soon.
Boxwave advertised pre-orders were available for October 9th shipping. I searched high and low but couldn't google a single coupon code, so ended up paying full price of $12.95 + $2.50 shipping. They shipped a day or so late, and because of the long holiday weekend it arrived a little later than it probably could have, but as far as shipping, packaging, tracking go, I give Boxwave an A-
I had actually been perfectly happy with the screen protector supplied by HTC, but as others have noted, in some cases it may have been a tiny bit too large, causing bubbles along one edge. I think I had put it on pretty perfectly, but then, in my obsessive need for perfection, had pulled it off a little and proceeded to snip away too much screen in an attempt to get it to fit just right, making for an install that now looked a bit messy and with a bit of glass exposed along a jaggedy edge of protector. But the Boxwave fit perfectly, and very easily, just using the instructions on the package (i.e. I just put it on dry, no sprays or water). I did steam up the kitchen a bit first to try to remove dust, and obsessively cleaned the screen for 10 minutes before attempting the install. On my first attempt I started from the short top edge and that caused a problem as the protector was now not aligned correctly down the right side, so I pulled it up and laid it down again from the long left edge, making for a much easier alignment. However, when I had pulled up the protector from the first attempt, I had used the little plastic card to ease up the protector; I think I caused some very minor damage to the protector at the point of contact, as there is now a tiny minor bubble there that is probably caused by a kink I may have made in the plastic. I'll work on smoothing that out, but it's off the screen and very minor (however, let that be a warning to others to be extremely careful if you need to lift the plastic off. I tried using sticky tape but the suction was too strong for it to get a grip, and using something like a pin seemed like potential to damage the screen.) For fit and finish and ease of installation, I give Boxwave an A (and me a B- )
The surface of the 'Crystal' clear screen (I don't know how different the 'anti-glare' version would be) is very slick. In fact looking at it, touching it, sliding my finger across it, and using the stylus on it, seems exactly the same as the actual glass screen on the phone. I went into notepad and made a new note so I could doodle with the stylus. With almost no pressure I could draw lines about 90% of the time, the rest it would skip a little. But with just a tiny amount of pressure, about what you would probably use in normal use, it was at 100% coverage, with practically no drag feeling, just a nice slippery but not too slippery feel. Sliding with my finger is fantastic, I can now scroll through the programs screen much easier than I did with the original HTC. For sensitivity and surface texture I give it an A+
Overall I give Boxwave and the Cleartouch an A+. I am reminded of that old Memorex commercial 'Is it real, or is it Memorex', because looking at the phone right now, I can't tell it has a screen protector, it looks just like glass. I am sure there are others out there as good, although I doubt there are any much better. There are certainly other quality ones that are much cheaper, $15 seems like a crazy price to pay for a piece of plastic. Others come with 2 or 3 protectors, and many have coupon codes you can find on Google. And others, like Bodyguardz, come with a solution for complete protection, not just the screen. Of course time will tell, but based on my A+ experience with Boxwave on my MDA, I really am quite confident of the same longevity and performance on the TP2.
One happy customer.
I've used Boxwave screen protectors and accessories for the past several years, and I can honestly say I've been always 100% pleased. I've used both the antiglare and clear protectors, and prefer the clear ones - but it's all a matter or preference, but overall a good purchase.
First, Boxwave screen protectors have always been my standard. I've tried a couple other types (mostly what's been included with devices or what I can find in retail stores) and won't likely be messing around with that again. I personally prefer the "crystal" models over the anti-glare because I didn't like the affect of the anti-glare pattern on the display. It kind of gave it a fuzzy moire pattern. The crystal basically looks like those super glossy laptop screens - looks great in low/medium lighting but could be a problem in certain direct light situations. Still, the trade-off is worth it to me.
Second, does anyone know if any of the existing TP2 protectors will fit the AT&T Tilt 2? The European/UK model looks not ideal because of the front camera hole and the T-mobile version appears to have a slightly different button layout on the bottom. Both the Verizon and Sprint models look right to me on the web page, but Boxwave support just says to submit a request and wait. I would prefer to get a protector on mine ASAP but am reluctant to order if the fit isn't right.
Daniel
bought one for my Sprint Touch Pro 2, it applied perfectly and not noticeable at all. I prefer it way over the invisibleshield I had on my Vogue which was too rubbery and reflective.
Am I correct to think the Boxwave screen protector for the Sprint TP2, Verizon TP2, and the ATT Tilt 2 are the exact same thing? I have been looking at pictures and the screen shapes look identical. The only different ones are the T-mobile and the front facing camera versions.
Thanks!
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
I've been looking at some reviews including a very lengthy one from a couple of years back on Youtube where he tried about NINE different brands (Including anti-glare or crystal from the same manufacturers) and he tried pretty much most of the known brands including Zagg. He did miss out Martin Fields and a few others though.
I've seen the XO skins are pretty easy to apply wet. Much easier than the Zagg.
XO aplication.
http://www.youtube.com/watch?v=-Td0vTcKMME&feature=related
Brief thumbs up from someone.
http://www.youtube.com/watch?v=VJGJKH8BGz0
XO skin for TF
http://xoskins.com/laptops-tablet-r...ors/asus-eee-pad-transformer-screen-protector
Large shooutout of various screen protectors. But it's a couple of years old and for a tablet PC rather than pads.
http://www.youtube.com/user/tonkabui#p/u/0/9XdVHL1M7vM
I am going to continue looking. But if anyone finds the perfect screen protector let me know. That XO looks easy to apply. But I want anti-glare and anti-reflectin as well as anti-smudge and 0 bubbles (in other words eacy to apply). Protection from scratches is actually pretty low down my list of wants.
If anyone can post their experiences (good or bad) of various screen protectors please do so here. I noticed there is a reasonably priced TF1010 anti-glare protector made by Posr.us and has two five star reviews on Amazon. Also someone called MFX is making one as well as Martin Fields and SGP Steinheil.
Thanks I needed one still and this looked decent and easy to apply (I prefer the wet application) I bought it and used coupon code "retailmenotxo" for 15% off ... it covered more than the shipping so that was cool.
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
well my screen has a scratch only had it a week
rgalarza75 said:
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
Click to expand...
Click to collapse
Well, scratch resistant =/= scratch proof, so all those people who say Gorilla Glass is the reason why you shouldn't need a screen protector are fooling themselves. I personally have a clearfreak protector on my transformer. It definitely makes me feel more at ease when I use it.
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
I picked up a dcmugen antiglare from ebay and I love it. Damp or dry install, the type with the two peel off layers, and repositionable to boot. It ships from Asia, and mine came with a slight crease causing bubbles that cant be flattened. I've requested a replacement, waiting to see if they follow through. So much easy to use indoor and out, and far fewer fingerprints to clean off.
Sent from my Transformer TF101 using XDA Premium App
Got a zagg at bestbuy today because I was bored more or less. Installation went well even though the thing stuck to itself. But a few hours later and I'm bubble and wrinkle free nd protected. Now to decide if I want a spg crytal or not....
mybikegoes200 said:
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
Click to expand...
Click to collapse
I bought one as well, but it looked like crap on mine. Hen again im terrible at applying these things. I usually let Verizon put screen protectors on my phone.
Has anyone tried the skin protector from PhantomSkinz? I have their carbon fiber back skin and it looks great and is durable
Sent from my DROID X2 using XDA App
My experience with Zagg has been mixed with all my devices but their customer support is good. If you get a bad protector(line down middle, or little imperfections) they will send you another.
The XO skin looked very promising, and for $10 cheaper I thought I would give it a shot. Just placed an order for the XO skin.
Use discount code retailmenotxo for $3 off(free shipping pretty much)
Pulled the trigger on an XO
after watching all the youtube reviews, i decided that the XO looked best.
ordered one this morning.
just a thanks to all the folks responsible for putting the links and testing together in one place for time-challenged guys like me.
btw, i think the transformer is one of the smartest purchases i've made in the last few years. i'm thoroughly enjoying it.
marvin
Following up on my earlier post. Installed the XO skin in my university's clean room(0 dust, yes I wore the cleanroom suit) and it has streaks. The protector quality is very good but once you put it on there are visible streaks all over. I kept the applicator wet so there would not be "burn marks" as specified by the instructions.
Going to ask for a refund... maybe I'll give Zagg another try. My first ZuneHD protector was wonderful but the 2nd one I got had a big line down it(bad QC).
The perfect screen protector
I always have problems applying the screen protectors to any of my devices, so I did some research and decided to go with one made by a company called Aurum. The deciding factor was that it had a large cut out for my camera so its easier to apply. Overall, I am very happy. I got the two pack in case I messed up the first one.
http://www.amazon.com/Asus-Eee-Pad-...4?ie=UTF8&s=electronics&qid=1308242480&sr=1-4
I dont think I will ever buy the wet applicator types again, the dry is just simpler and gives me choices in whether I want a clear or the anti-glare. Hope this helps
Here is the link to the anti-glare offered by Aurum in case anyone is interested: http://www.amazon.com/Transformer-M...1?s=electronics&ie=UTF8&qid=1311083745&sr=1-1
I usually get Bodyguardz for all my gadgets (mostly phones). It just feels better than Zagg's invisible shield and other screen protectors.
Anyone tried using Bodyguardz? I'm thinking about getting either the full body protector or just the screen protector. Hmmm this is tough.
Following up... after 24 hours drying/curing it looks much more acceptable. The funny part is there is a tiny black spec under the protector. I don't know how it got there since I was in a cleanroom!
Found this one in Amazon, similar to the Aurum with anti-glare.
Anyone has used this ? Is this any good ?
HandHelditems - Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector (3 Pack) (Free HandHelditems Sketch Universal Stylus Pen)
http://www.amazon.com/gp/product/B0056K5D0G/ref=ox_sc_act_title_2?ie=UTF8&m=A1NOY9EOR8TXD6
Hmmm... I have previously considered to buy it too, but I've seen the Gorilla Glas Test with the Transformer in a YouTube video... you dont need a screen protector
I just got a screen protector from Photodon. Their MXA film is great. It was a bit of work to put it on with no dust and correctly aligned. But once it's on it looks pretty good. It's got a glossy finish, so it looks just like the original screen. You can hardly tell that there is a screen protector on the transformer. It is pricey at almost $20.00 each, ut the screen is still sharp and crystal clear with none of the haze that a lot of cheap screen protectors have.
xxx.photodon.com/p/MXA-5445-01.html
I used to have Bodyguards for my HTC Touch Pro and it peeled after three months both times that I used them. Now I use Phantom Skinz and I get no orange peel effect and I've had one on my HTC Evo 4G for almost 1 1/2 years with no peeling and no orange peel effect. Smooth as glass and you can't even tell it's on there.
Now I have Phantom Skinz screen protector on my TF and Phantom Skinz Chromatics white carbon skin for the back side. Very nice to say the least.
I would highly recommend a screen protector for the TF because although it has Cornings Gorilla glass, it sux for finger prints and fingerprints are easier to wipe off of a sceen protector than the Gorilla glass.
im using the steinheil Ultra Crystal. also use it on my phone.
I'm trying to decide which will be a better fit for a screen protector. Right now, there really seems to be only two contenders. The Zagg and the Skinomi, links provided. I know there are generic protectors but I'm looking for the "best of class" for this beast. Anyone have any suggestions before I scratch this baby?
Zagg
http://www.zagg.com/invisibleshield/htc-titan-cases-screen-protectors-covers-skins-shields.php
Skinomi
http://www.amazon.com/Skinomi-TechSkin-Screen-Protector-Shield/dp/B005OZHG7Q/ref=sr_1_1?ie=UTF8&qid=1323207100&sr=8-1
-Cyber
I personally hate the wet type of protectors for the screen. It messes up the smoothness of the touchscreen & your fingers don't glide over it easily (especially the tacky feeling Zaggs. Those are the worst).
Go with the dry ones (the kind that use static cling to stick). I ordered the REALOOK protector from Amazon that gets good reviews on their other devices. Should be here in a day or two. They feel as smooth as glass.
I guess it's a matter of preference. I had a Zagg on my Focus for a year now, and it works great for me. It does give the screen a more "grippy" feel though, but I actually like that. If you want it to feel slick, I probably wouldn't go with the wet style. Another plus for the wet though is that it's pretty much invisible when applied. You won't get any peeling or bubbling like a dry protector. A lot of screen protectors are quite noticeable when they're put on a phone.
Reading the Realook reviews on Amazon shows they get mostly great reviews. I might have to give them a try one day. For now, I'll stick with Zagg though. It just arrived yesterday, and my phone should be in by Thursday, so it'll be the first thing I install.
AT&T
I got the one from AT&T from there website and LOVE LOVE the feel it gives.
Just enough Drag to feel comfortable.
wrapsol makes some good ones as well. haven't decided what to get yet...
Got from tmart (can't post a link yet)
search ror item BD005788
Not bad at all
Brando Ultra Clear is the best.
got the htc one from clove technology.excellent fit
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Tempest790 said:
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Click to expand...
Click to collapse
Yep, got mine in too. And I agree. Its almost TOO perfect, meaning they cut this thing so there's hardly ZERO room for error when applying. I actually ended up scrapping the first one I applied (it comes w two) because I wasn't satisfied with the slight bubble in the corner.
But I FINALLY managed to install the second one perfectly. Now its amazing & 100% perfect. Thank God, cause it freakin took forever. You really have to have patience when applying these. Be sure to stick a small piece of scotch tape on the bottom side so you can peel it up easily, because you're going to be doing that a lot to get it to seat just right.
I installed the maximum body Zagg and the screen protector turned out perfect. I've installed zaggs on LG Quantum, and Samsung Focus so I had some practice. For some reason the Titan zagg seems better quality than the ones installed on the other phones. I'm really not seeing any orange peel. I also put on the case mate tough case and doesn't mess up the zagg protection at all. For the Titan I love the Zagg
Sent from my HTC Titan using Board Express
I never liked the grabbiness of the Zagg protectors. I ordered the ATT offered two-pack not knowing they were the full on glare reducing version. At first, it was a little too much, but the glare reduction seems to settle in a bit with use. OR my eyes are used to it now, but I quite like it after using it for a while. I matches the matte finish of the phone.
That said, I do want a screen protector that doesn't have anti-glare made by the same people as the ATT Samsung Focus version. Super slick, was pretty tough. Anyone know the vendor that made it for ATT?
"Orange peel" - that's a good description of my Focus Zagg screen protector. It didn't bother me though. I still have my Zagg in my drawer if the Realook craps out, but I don't think so.
I just bought the Skinomi Carbon Fiber full body kit that comes with a screen protector and really like it.
One BIG problem though: The Carbon Fiber back skin seems to have killed my signal strength. I now get no service instead of 3 bars? It covers the whole back of the phone. Even the plastic antennae area.
I'm surprised that it would kill your signal strength. I would check the metal contacts on the back case and the phone to make sure everything is touching and seated properly. Someone else in the forum tried that, and it fixed their problem.
I'm using atFolix anti-glare screen protector, it's brilliant get improved contrast and it's finger print resistant!
Got it from here: http://www.amazon.co.uk/atFoliX-FX-...m=A3P5ROKL5A1OLE&pf_rd_r=05DX3CNJ9KFAVHD8RYFC
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
xtrememanix said:
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
Click to expand...
Click to collapse
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
i'm not sure what you mean by the frost effect . to me its really clear !
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
Ok I'll answer my own question! Curiosity got better of me so decided to get Rock Naked Screen Protector AF & AG, and sure enough it's clearer then atFolix anti-glare screen no frost effect!
So if anyone's interested here are the Pros and Cons between the two screen protectors:
atFolix anti-glare got it from here http://www.amazon.co.uk/atFoliX-FX-...0VSQ/ref=sr_1_1?ie=UTF8&qid=1330083294&sr=8-1 :
Pros:
- Easy to fit
- Perfectly fits the screen of the Titan no gaps!
- Excellent anti-glare and anti-fingerprint
Cons:
- You lose sharpness of the display and get frosted glass effect on close inspection!
- Easily scratches!
Rock Naked Screen Protector AF & AG got it from here http://www.obostore.com/rock-anti-f...ed-screen-protector-for-htc-titan-p-3597.html :
Pros:
- Good anti-glare and anti-fingerprint
- You don't lose sharpness of display i.e. no frosted glass effect
Cons:
- Fiddly to put on!
- Not a perfect fit for Titan about 1mm gap around screen!
- Easily Scratches
For me between the two I prefer the Rock Naked Screen Protector over atFolix losing screen sharpness/frosted glass effect was too much of a compromise!