my internet sharing isnt working
It worked fine with my first mogul but
after I went to sprint and got a replacement phone,
I tried to use the internet connection sharing. I press on connect
and the error that keeps coming up is
Error code 67 registration failure your pcs vision username and or password may be incorrect
why does this keep coming up? did the person at the sprint store set up my phone correctly?
what could I do to fix this problem??
the phone by itself goes on the internet perfectly without any problem
What ROM do you have on it?
Have you run IOTA?
I had the same issue so many times I learned how to reset all the internet connections myself, but you need your unlock code to do that. You can call sprint and ask for the code.
its the sprint rom that came with the phone 3.56
can you please help me and tell me what to do and how to do this myself ?
it will be very helpful thanks...
Related
When I try to connect to the Data Network, I get PPP Connection Error; Error Code: 11. I have my [email protected] and vzw as the password, and #777 as the number. Any ideas how to fix this? I tried reinstalling the carrier cab. Also did *228 a couple times. Are there any settings in EPST that I need to change?
ibenjakinov said:
When I try to connect to the Data Network, I get PPP Connection Error; Error Code: 11. I have my [email protected] and vzw as the password, and #777 as the number. Any ideas how to fix this? I tried reinstalling the carrier cab. Also did *228 a couple times. Are there any settings in EPST that I need to change?
Click to expand...
Click to collapse
You need to call support.. Tell them you hard reset your device and you need a DMU reset. (they zero out your ESN, removing all your services and then add them back)
You can also do this online if you have another device you can switch activation to and then switch back....
you may get a tech who is gonna have you try all different kinds of things.. enter this user / pass.. no try this one... but keep on them. Tell them you do this all the time cause you are a software developer or something and you have to test on clean fresh device, and when you hard reset you often need a DMU reset... they will do it.
ibenjakinov said:
When I try to connect to the Data Network, I get PPP Connection Error; Error Code: 11. I have my [email protected] and vzw as the password, and #777 as the number. Any ideas how to fix this? I tried reinstalling the carrier cab. Also did *228 a couple times. Are there any settings in EPST that I need to change?
Click to expand...
Click to collapse
Your DMU.key is corrupt. You can do 1 of 2 things.
1) Call VZW... Tell them you loaded the new MR1 update and currently have no data. Your research leads you to the fact that the DMU key needs resetting and only tier 2 support and above can do this. While they are saying they are resetting it... put the phone in flight mode. They don't tell you this. Then put it back when they say it's good.
2) logon to verizon's website and activate an old DATA phone. wait 10 minutes. Then re-activate your titan.
Putting the phone in flight mode both times cancels any possible hung data sessions.
Edit:
x51 said:
they will do it.
Click to expand...
Click to collapse
He beat me to it.... GRRR
Well thanks to both. I was afraid I needed a DMU reset. Suppose I'll try option 2 with my old Razr. Thanks for the quick response.
Sorry for the double post Opera Mini was acting up on me.
x51 said:
...when you hard reset you often need a DMU reset... they will do it.
Click to expand...
Click to collapse
Have you ever had a technician reset your DMU? This has been discussed before and seems unlikely. They always seem to start a trouble ticket and send it to some other network department. If you got a technician to do it I'd be interested in knowing that since in my and other's experiences, the technicians generally dont know how/cant do it.
Your best bet is to do the "reactive old phone" method
deeznuts2 said:
Have you ever had a technician reset your DMU? This has been discussed before and seems unlikely. They always seem to start a trouble ticket and send it to some other network department. If you got a technician to do it I'd be interested in knowing that since in my and other's experiences, the technicians generally dont know how/cant do it.
Your best bet is to do the "reactive old phone" method
Click to expand...
Click to collapse
yes. I had one do it earlier. Just as I explained. Told the CSR exactly what I needed... they hooked me up with Tier 2... and the person actually reset it while I was on the phone. I had the same exact problem / error.
deeznuts2 said:
Have you ever had a technician reset your DMU? This has been discussed before and seems unlikely. They always seem to start a trouble ticket and send it to some other network department. If you got a technician to do it I'd be interested in knowing that since in my and other's experiences, the technicians generally dont know how/cant do it.
Your best bet is to do the "reactive old phone" method
Click to expand...
Click to collapse
At least 6 times in the last 12 months (with Tech support)... but one of my friends is a tech and I just shoot him an IM If he's working.. otherwise I call and deal with tech support.
I hear you though... I've found that both an Akey and DMU reset are sometimes painfull.. Trying to talk a tech into doing it can be rough. Thats why I start off telling them I'm a software developer and I need to do this all the time.. bla bla bla (Plus they flag it in your file.. so they can see that Ive had it done often, if they read that part). Some of them figure I know what i'm talking about and jump right to it, and others will make me dance like a monkey going through each step of thier troubleshooting guide.
The important thing is to be nice.. if they want you to take out your battery, take it out.. If they want you to try another username... try it.. eventually (because there is no other fix.. on thier end) they will have to do the DMU reset...
Oh... And when they act like it was thier idea... just go with it..
I tried the activate old phone method with no luck. I may not have waited the full 10 min (wasn't sure if that was important), but I did *228 with the old phone (Razr) and could make calls with it. I then switched back to the 6800 and did *228 opt 1 but still get the PPP error. I noticed in EPST under the Security tab that my PPP password and HDR AN AUTH password are all symbols. Do I need to change these to "vzw"?
ibenjakinov said:
I tried the activate old phone method with no luck. I may not have waited the full 10 min (wasn't sure if that was important), but I did *228 with the old phone (Razr) and could make calls with it. I then switched back to the 6800 and did *228 opt 1 but still get the PPP error. I noticed in EPST under the Security tab that my PPP password and HDR AN AUTH password are all symbols. Do I need to change these to "vzw"?
Click to expand...
Click to collapse
Hrm.. I should have mentioned this before.... When you activated your Razr, you should have been prompted that it will remove the data plan... Did you add it back to your plan online?
Also, re-run the VZW carrier cab... it "Should" fix any username / password issues you might have created while messing with them...
The ultimate problem is still the Data services... but if you messed up the user / pass you wont know if you fix it.
Got it working after re-running the carrier cab. Thanks.
Hello, this is my first post her and my first experience in doing this.
I bought a 6800 off of eBay, It is the CDMA version w/ GPS, a Bell Mobility phone. I was under the impression that MTS (Manitoba Telecom Services) was still aligned with Bell, but it turns out that hasn't been the case in over 6 months, so now I may as well try and hack my phone. They don't use the same data lines anymore either.
I took it to MTS to get it activated. The calling and text messaging works just fine, but the data part does not work AT ALL. It gives me an error message "Can't connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
I've been doing some reading on the wiki and other posts here, and it's a lot to absorb for someone who is completely new to this. I THINK all I have to do at this point is unlock the phone, change the carrier to MTS, and enter the akey (which I could possibly get from MTS).
Does this sound about right? I realize I could put a custom ROM on and a new Radio ROM, but if I don't need them just yet I would rather see if this will work.
jordan-s said:
I realize I could put a custom ROM on and a new Radio ROM, but if I don't need them just yet I would rather see if this will work.
Click to expand...
Click to collapse
i feel a custom rom is the first thing to do to these phones.... sorry cant help with the other questions......
Can you call them and find out how their data connections work?
Like with me, for Sprint, I have to dial #777. You might just have to edit your connection settings
Can't speak directly to MTS, but on VZW, what I do is an esn change off the phone to my backup...flash the custom rom, then esn change back. This takes care of akey and provisioning.
Aite Ive got two samsung vibrants. Bought them both new. Did the exact same thing on both to unlock them and make em work on AT&T.
One works perfect. The other one just says No service no matter what i do. I tried selecting the network manually but it says sim card doesnt support the network.
Next I tried the odin method to put the stock firmware back on. Rooted. Since my unlock codes werent present on my phone, i used the repair_nv_data fix to try and manually set the unlock code(what i did for the other vibrant), but still no luck. Still says no service when i put the sim in. Weird thing is data kinda works. It says no service but the 3G/EDGE icon keeps popping up and disappearing.
Any suggestions?
Search xda for "enabling the 850 band", id look but search is crap on the xda app. Its my understanding that it works better off of at&t towers with that enabled. Hope this helps.
Sent from my Black Froyo'd, Voodoo'd Vibrant with a gooey Macnut center
Hey so i did exactly what you said but no luck.
Weird thing is im connected to my data connection and can access the market and browser etc. But it still says no service and i cant make/receive calls and texts dont work either...
Really need help guys
Aite so im in india right. Under phone status this is what i get:
Network: Airtel
Signal Stregnth: -93dBm 10 asu
Mobile network type: EDGE
Service state: Out of service
Romaing: Not roaming
Mobile network state: Disconnected
Really need help
Anyone found a solution for this?
I'm having the exact same problem, except I've had my phone for almost a year and just now got this problem. I can use data to browse, twitter, whatever; but can't make any calls. I tried my SIM card on another Vibrant and it works fine; tried another SIM on mine and still get "No Service". Any help will be greatly appreciated.
xgibran said:
I'm having the exact same problem, except I've had my phone for almost a year and just now got this problem. I can use data to browse, twitter, whatever; but can't make any calls. I tried my SIM card on another Vibrant and it works fine; tried another SIM on mine and still get "No Service". Any help will be greatly appreciated.
Click to expand...
Click to collapse
Can't link cuz I'm at the airport lol but go into settings and check if ur imei is correct. If its not, look at my previous posts for the imei fix. May or may my work but give it a shot
I Just rooted my phone using Super One Click rooter and unlocked it using SGS Unlock Pro app from the market. I'm trying to unlock it on Roger's network (i think its the same as AT&T)
Thing is i cannot connect to the internet/data on the phone, it says to check connection settings but i dont know what i need to change. Phone calls and texting works just not data.
Any help would be great, i am pretty new at this stuff and have spent the past 3 days trying to figure this all out
You need to change the proxy setting to those of your network service provide. Just call the customer care and ask them for the detailed info about that, they'll probably send you a sms carrying the settings for you to install based on your device.
If that doesn't work (I had that issue) just manually enter the settings after you ask the agent about them or better yet check them out on the internet. Usually service providers post them on their official sites under GPRS, EDGE or 3G.
Weird i just changed my APN to internet.com and it works
i followed the thread made by whoareyou and i got the 4g network option and even put in the apn but nothing seems to work. i also get notifications that the voice and data are restricted. everything im doing so far is new to me but i cant get this to just work. if anyone could help me it would be much appreciated. when i turn the network app off and back on for a second it says in service then right back to emergency calls only if that helps anything to figure this out
i'm experiencing the same proble. I got the network to say 4G, I put in the proper APN for t mobile, but nothing. I put in the lines of code again in the cmd prompt because it worked for some people on the second try, still nothing. Please help!