My screen is off most of the time now.
I open and close the keyboard a few times and it turns white!
Sometimes (like 1 time out of 100) I get lucky and it turns on! But with no backlit, what makes it very hard to read.
I know the problem is the flexboard (I opened my Cingular 8125 and noticed the flex is broken/cut).
Where can I get a new one?
Anyone as a broken Cingular 8125 and wants to sell me this part?
Thank you for your help.
i have the same problem... try this http://www.cellulardr.com/Cingular8125FlexCable.htm but its hard because its do it yourself and what if the part is broken.. i dont know man.. im having a hard time too...
DITTO..
my wing just started this..
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
Hi,
i bought a used mda via ebay and got it yesterday.
First thing i noticed was that the touchscreen didnt work right... i somhow managed to get through the calibration tool that poops up if i turn the device on. After that the touchscreen worked really good for 1 day and then suddenly it stopped working completely...
Anyone had this problem before and can give me some advice ?? I already got a 20e refund but i want to try to repair the device instead of selling it as broken.
And another question i have: Can i use the wm 2003se on a german device ??
Thank you
Seraptin
Edit: got it repaired myself... I opened the device and cleaned everything... there is still some dirt between the glass and the screen.. if anyone knows how to remove the glass to clean that, im listening But i dont think thats possible anyway.
my screen is broken
Hi,
Glad to read that you have repaired it yourself. I just dropped mine on the floor yesterday and the screen is broken. Touch screen still works but the screen is cracked and I can see a black spot. I wish someone can help me purchase a new screen. I would try to install it myself.
polar20
Hi guys, some months ago my htc is fall by my jeans and it break down. So i've buyed an lcd by brando hk (the same that sell screen protector) an lcd with digitalizer. Ok the pack arrive, i replace the lcd and is perfect. Work every etc. I had used for 1 day and some hours.. The next day i tidy up, start the htc and ok. I put in standby by pressing the button on the top.. After some minutes i re-press that button for use it because i've received a sms and don't work. So i reboot the phone, and nothing. It is only the lcd that don't work, because the feedback vibration work, if i call my phone ring and etc etc. But i don't see nothing. So very very angry i shutdown the htc. The next day again i try to use it and make the same play. So i contact the brando hk and ask to send me another lcd + digitalizer. They ship to me. Arrive, i replace it again. I use that for 30minutes and after make the same problem -.-" again, and again, and again. Guys please help me, i want re-use my fabolous phone
I don't think that is a software problem, because i've changed different rom and make a lot of full reset.
Thanks anyway
Nobody guys? |:
No one? ._.
Rules
Lilith_v2 said:
No one? ._.
Click to expand...
Click to collapse
Whilst I do appreciate that you are experiencing a problem on your phone, and you would like some help from the good people on this forum, please follow the rues, and do not post the same threads on different sub-forums.
You have posted the exact same link on TOUCH HD ACCESSORIES and the TOUCH HD GENERAL.
As for your problem, the only thing I would suggest is that your LCD may be working fine, but your motherboard maybe faulty, causing the display to fail from time to time. How old is the phone?? If less than a year, just send it back to your supplier for a repair under warranty. (Obviously reflash the original stock ROM before you do!!).
Why, hello there!
First of all i would like to apologize for two things:
(1) My English is awful so bear with me please!
(2) I couldn't find an answer for this question and i tried really hard. So if there does exist an answer please point me to it nicely
Now, concerning my problem.
I have bought Elephone P8 from Banggood . com
(link could not be uploaded cause i am a new user)
(if you want to view the phone go to Banggood and searh for Elephone P8 :angel: )
From Day 1 I have had a problem with my screen. It touches itself!!
I didn't do anything for that problem as i didn't believe it could be possible for a phone to touch the screen itself.
Now into details:
When i unlock my phone and use it after a couple of minutes (i have enabled the option to view the clicks on the screen) i see thousand clicks on my touchscreen in a vertical line. From the speaker (where you talk) to the home button. It is always in the same line!!
And when i close the display of my phone and unlock it again, the thousand clicks stop and the phone works normally again.. :/
I know that it is hardware problem because i have changed roms, i have rooted and i did all i could to fix it softwarely! :fingers-crossed: SO i am convinsed it is Hardwared reallated issue! :victory:
MY QUESTION IS:
How can i fix this problem if i want to open my phone?? If i change the glue between the glass and the LCD will it fix it??
Please , please , please! Don't tell me to send it back and ask for a new one OR take it to an expert to fix it!
THANKS A BUNCH GUYS!!!
It could (!) be just some stress on the Screen. Maybe you could do something if you just disassemble it, look where the stress could come from, and put it together again after that.
I had that a few years before, and for me was the Solution to bend the Case a bit, in which the Screen was pressed.
Hopefully that works for you
Thanks for your reply man! I really appreciate it!
Now that you mention it, when i dissasembled my phone i couldnt unscrew the last screw that is attaching the motherboard to the screen. It was so hardly screwed!
Maybe that little screw does the job, so i will try and unscrew it!
ONE MORE THING
If for some reason i can't find the pressure point from inside the phone, what other options do i have?? Since i have scratched the front glass a bit, i am in the temptation to change the front glass and clean the Screen a bit.
What do you think?
P.S.: Further advice is very much appreciated!