brothers
i was installing this rom(http://forum.xda-developers.com/showthread.php?t=449975&page=1)
after upgrading my SPL to 1.07 oref and ONBL to 1.17.0000 am stuck on the boot screen
am not able to install any rom including the stock one
s/n HT8XXXX
plz help
thnx in advance
plzzzzzzzzzzz heeeeeeeeelp
I BEG YOU
PLZZZ
PLZZZZ
PLZZZZZ
PLZZZZZZ
ZZZZZZZLP
i get error 300 while installing rom
Jyot, what was your original ONBL buddy?
do all step again
what splash screen showing ?
my orignal onbl was 1.17.0000
whenever i start my gene it goes to the bootloader
when i try to install a rom it says error 300
PLZ HELP
plz help
plz help
GOD what shud i do
Before flashing the cooked ROM, remove the SD Card. I guess error 300 is (connection error)? I had this freak problem, my Gene would sit at the boot loader for ever when SD Card was inserted. Do revert back if your problem is solved .
yo man mah phone ROCKING again....horay
Related
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
First try to remove the battery and then put it back in and try to switch it on see if it boots into the windows...if not then follow the step given below...
Download any custom rom for OLD gene and run the rom update utility (RUU) it will be back to normal...
Note : Most importantly don't panic ...even if the phone is taking its usual time to boot up it may seem longer cos we are worried....have patience...
hay man
tell us the serial number of your device to tell you exactly what to do
is it (ht8xxx) or (ht7xxx) ?
it is very important
and for god's sake guys read the sticky threads first.
do not do anything before getting answers from other members.
Thanks guys, but I solve it already but I am not able to download any rom for my gene.
Can somebody give me another mirror apart from rapidshare and megaupload............. and which ROM is good, like with cube for my gene HTC 3400?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
Its normal thing that ur device got off after hspl.exe
it seems like u hv new gene....so now u should use Oref unbricker...
u just followed step 1....
so u should move on to step 2
which is unbricking gene by oref method
http://forum.xda-developers.com/showthread.php?t=472169
read this bro n follow instructions...
Thank you once again but I have solved my problem already. Now all I need is a new rom for my old gene.
Could anyone give me alternative mirror for any rom? Rapidshare and megaupload is not working for me.
Help - Gene stuck at boot loader after upgrading ROM 6.5
ONBL 1.07.0000
SPL 1.07.olip
GSM 02.79.90
OS 1.7.0.0
This happened when i upgraded the ROM from WM 6.1 to 6.5
Kindly help me how to restore my phone
same here
same happened to my Gene. I tried upgrading ROM to 6.5. after restart, it get struck on bootloader screen. it is not even detected by activsync
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse
i have a Old gene on which i had upgraded the rom to windows 6.5 using Olipro.
Now i had given the phone to my brother he again tried to upgrade! But the phone is stuck at the tricolour screen showing;-
ONBL (blank)
SPL 1.28.0000
Dont Power off!
pls update new image Now!
Re-formatting OK!
PLease help me....my phone is stuck
http://forum.xda-developers.com/showpost.php?p=4894163&postcount=388
it may help u as its an official ROM which contains IPL, SPL, RADIO, EXT & ROM
Same problem
Please help exact same problem ...prob cid locked and no bootloader...
hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
up
light25360 said:
hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
Click to expand...
Click to collapse
Any official ROM can not be flashed directly you must go through this process
http://forum.xda-developers.com/showthread.php?t=506467
You must remove spl.nb,gsm.nb and other .nb files but not os.nb because they will mess up with your device's spl and bricks it.
Since you have already flashed this ROM, unfortunately you've bricked your device.......
So, i would suggest you to patch your SPL via this guide http://forum.xda-developers.com/showthread.php?t=472169 and then try to flash custom made ROMs.
Other way is to remove that bad flashed spl.nb file but don't know the method to do it....
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
light25360 said:
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
Click to expand...
Click to collapse
I don't know what to do now.....
But what about this??
GENE J-TAG Restore
ok I did not try JTAG Method but tnx for your help dear mr.harsh .
I would try this method and I will say results in this thread
also sry for my bad eng