Mobile O2 XDA ATOM ROM WM5
Can someone guide me how to reset audio ?
When i get call i got ringing sound but mic and speaker not working at the same time if i open a audio file no sound listen and when i made or receive call all my audio not working including mic.
If i insert headset both mic and ear piece working good.
pls help me to get out of this problem.
tht problem was happened with me play any music and insert ur headset jack slowly and try 2 move it right and left the sound will back tht wht i did try it
Me too, and now it still thare aren't sound
there are any body tell me that it's happen from sound chipset or mic. plug not re-spring when me unplug mic.
Audio issue
Hey I am having the same issue. It seems to happen when after headphone use, so the audio jack could be the issue. I think the reccomendation to move the headphone pin in the jack might work.
But the advise is that if it works, do NOT use the head phones again.
Pirate31, you were right. I could get the audio to work after moving the head phone pin around in the audio jack, done gently. Thanks.
thx rvirdi if u want anything else tht my email [email protected]
ok
bye
the problem is O2 atom
try out a back entrance while the headset jack play media
will it solve the problem if we change the headset jack? my usb-port also kinda loose so I want to change both, are there any guides for this?
Hey all finally i got solution
Opened phone and unplugged all connections and replugged then my phone works fine.
There is a problem when we placed our phone hardly the connections are losses so this kind of problem happened.
Be careful when you open in the top part of phone (camera area).
Related
HI Everybody,
I have a SPV M2000 Blueangel . I have a problem in my Headphone jack
After Plug in the headphone The Headphone is working correctly But
after Remove phone speaker & phone mic doesn't work on the call.
when incoming call the phone speaker is ringing well but after answer the call
Phone's Mic & Speaker doesn't work
Plz Help as soon as
neosxneohacker said:
HI Everybody,
I have a SPV M2000 Blueangel . I have a problem in my Headphone jack
After Plug in the headphone The Headphone is working correctly But
after Remove phone speaker & phone mic doesn't work on the call.
when incoming call the phone speaker is ringing well but after answer the call
Phone's Mic & Speaker doesn't work
Plz Help as soon as
Click to expand...
Click to collapse
Check your setting of mic with input and out put mode.
I think the problem is there is setting.
otherwise go to troubleshooting process in your pc.
--------------------------
toronto escort agency | toronto adult companion
did this work?
davidtwhittle said:
Check your setting of mic with input and out put mode.
I think the problem is there is setting.
otherwise go to troubleshooting process in your pc.
--------------------------
did this work?
Click to expand...
Click to collapse
Hi Guys,
i have problem with my sgs2... few weeks ago i've damaged my phone by pluging headphones jack to soundboard with phantom (48V) turned on...
So now my phone thinks that the headset is connected all the time and when i make a call, sound and mic is going thru headset even if its unpluged, so i can't hear anything from speakr and microphone is turned of...
Now i'm running on CM9 experimental build - so i can't use app toggleheadset2 like before on CM7.
Is there any way to do software headset "unplug", e.g. to use terminal to route signal thru phone speaker and mic?
Thx
Hi,
So firstly my aux port on the phone was playing up so I bought the replacement part which included the speaker aswel as the new aux port. Took the old one out and put the new one in. The next day my phone rang so i answered it and i could hear the person on the other wnd but they couldnt hear me, when i opened up the voice recorder app there was no sound at all being recorded. I used a needle and checked there was no fluff in the mic which there wasnt but when I tries taking a video there was sound. Ive now found out there is a microphone for calls and voice recording and a separate one at the top for videos.
Is it best to replace the microphone on the main circuit board or would I be able to use the video microphone for calls?
Also when I plug in earphones with a built in mic that works fine for calls.
Any help will be appreciated!
P.s. I'm running CyanogenMod 10.2
Hi, please help!
My sbh52 Speaker suddenly stop working and have no sound at all...earphone output are OK and i Can listen music and answer calls but speaker is dead and when I answer incoming calls without earphone I cant hear their voice but they can hear me (mic is working)
I did reset sbh52 and reinstall software via pc companion (2.3.A.0.9) and reinstall SBH52 App.
after reinstalling sbh52 app a pop came up and ask for update sbh52 to latest version (2.4.A.0.2) so i updated to latest version (2.4.A.0.2) but updating to latest firmware did not resolve problem and still no sound from speaker!!!
My phone is Xperia Z Ultra c6802 (4.4.4)
I'm confused
No one?!!!
Send it for a repair, doh...
I had the same problem before. Finally i found that it came from the 3.5mm socket on Sbh52. Normally when you plug in the headphones then the sbh52 automatic switch the sound from speaker to headphones and vise vesa and this can be done by 3.5mm socket function (phisically). And somehow it does not reverse sound back to speaker after pull out the 3.5mm plug. All things that i had done just insert/pull out repeatly serveral times then it back to normal function. Let's try this.
ngquoctri2k said:
I had the same problem before. Finally i found that it came from the 3.5mm socket on Sbh52. Normally when you plug in the headphones then the sbh52 automatic switch the sound from speaker to headphones and vise vesa and this can be done by 3.5mm socket function (phisically). And somehow it does not reverse sound back to speaker after pull out the 3.5mm plug. All things that i had done just insert/pull out repeatly serveral times then it back to normal function. Let's try this.
Click to expand...
Click to collapse
WTFFFF...It Work!!!! Thank you mannnn:laugh:....I knew its a software failure
ikeyvan said:
WTFFFF...It Work!!!! Thank you mannnn:laugh:....I knew its a software failure
Click to expand...
Click to collapse
er, no, it's the software obeying the signal from the socket to turn off the speaker
Hello,
i have a strange Problem with my S3.
Since a few days, when i take a call i cant hear anything on the small speaker. Only when i switch to the big speaker.
Also the Musik-Player, Youtube-Player, Google-Maps-Navigation, stay quiet. The only way to get the sound of this app's is with cabled head-phone at the 3,5mm plug.
But as i told, system-sound, the phone and so on comming out of the big speaker.
Even with a connected blue-thooth headset the headset is not playing sound of the apps above.
But on other way the if i do phone call ... the blue-thooth headset is working.
For me it look like the software or at least some apps are not able to communicate to the right speakers....
Any idea what i can do ?
Factory reset first, if still the same then flash current firmware for your country with Odin, then factory reset again.
i did the reset... it did not fix my problem....but its now mayby showing me what the problem ist.... when the phone is booting it say me now that a headset is connected
what makes the detection that it shows me a connected headset where is no one ?
Reflash your firmware, if still the same afterward then either your 3.5mm socket or motherboard is faulty.