HI Everybody,
I have a SPV M2000 Blueangel . I have a problem in my Headphone jack
After Plug in the headphone The Headphone is working correctly But
after Remove phone speaker & phone mic doesn't work on the call.
when incoming call the phone speaker is ringing well but after answer the call
Phone's Mic & Speaker doesn't work
Plz Help as soon as
neosxneohacker said:
HI Everybody,
I have a SPV M2000 Blueangel . I have a problem in my Headphone jack
After Plug in the headphone The Headphone is working correctly But
after Remove phone speaker & phone mic doesn't work on the call.
when incoming call the phone speaker is ringing well but after answer the call
Phone's Mic & Speaker doesn't work
Plz Help as soon as
Click to expand...
Click to collapse
Check your setting of mic with input and out put mode.
I think the problem is there is setting.
otherwise go to troubleshooting process in your pc.
--------------------------
toronto escort agency | toronto adult companion
did this work?
davidtwhittle said:
Check your setting of mic with input and out put mode.
I think the problem is there is setting.
otherwise go to troubleshooting process in your pc.
--------------------------
did this work?
Click to expand...
Click to collapse
Related
Hello,
On my MDA I have TomTom navigator. My problem is, when I am in my care I want to have my headphone connected, in case of I receive a phone call. But if my headphone is connected I could'nt have the sound via speaker. Does it exist a soft or hard solution to disconnect this switch?
Thanks in advance.
Mobile O2 XDA ATOM ROM WM5
Can someone guide me how to reset audio ?
When i get call i got ringing sound but mic and speaker not working at the same time if i open a audio file no sound listen and when i made or receive call all my audio not working including mic.
If i insert headset both mic and ear piece working good.
pls help me to get out of this problem.
tht problem was happened with me play any music and insert ur headset jack slowly and try 2 move it right and left the sound will back tht wht i did try it
Me too, and now it still thare aren't sound
there are any body tell me that it's happen from sound chipset or mic. plug not re-spring when me unplug mic.
Audio issue
Hey I am having the same issue. It seems to happen when after headphone use, so the audio jack could be the issue. I think the reccomendation to move the headphone pin in the jack might work.
But the advise is that if it works, do NOT use the head phones again.
Pirate31, you were right. I could get the audio to work after moving the head phone pin around in the audio jack, done gently. Thanks.
thx rvirdi if u want anything else tht my email [email protected]
ok
bye
the problem is O2 atom
try out a back entrance while the headset jack play media
will it solve the problem if we change the headset jack? my usb-port also kinda loose so I want to change both, are there any guides for this?
Hey all finally i got solution
Opened phone and unplugged all connections and replugged then my phone works fine.
There is a problem when we placed our phone hardly the connections are losses so this kind of problem happened.
Be careful when you open in the top part of phone (camera area).
suddenly my speaker has stopped, the device fallen down before 2 weeks and now
No ring tones and no any voice would be heard. When I connect the headset there is sound heard within it.
Once I press on the speaker on the back of the device the sound works and If I release pressure it stops!!
Please tell me guys, does this need to replace the speaker, or it's just the connector problem??
Hi, please help!
My sbh52 Speaker suddenly stop working and have no sound at all...earphone output are OK and i Can listen music and answer calls but speaker is dead and when I answer incoming calls without earphone I cant hear their voice but they can hear me (mic is working)
I did reset sbh52 and reinstall software via pc companion (2.3.A.0.9) and reinstall SBH52 App.
after reinstalling sbh52 app a pop came up and ask for update sbh52 to latest version (2.4.A.0.2) so i updated to latest version (2.4.A.0.2) but updating to latest firmware did not resolve problem and still no sound from speaker!!!
My phone is Xperia Z Ultra c6802 (4.4.4)
I'm confused
No one?!!!
Send it for a repair, doh...
I had the same problem before. Finally i found that it came from the 3.5mm socket on Sbh52. Normally when you plug in the headphones then the sbh52 automatic switch the sound from speaker to headphones and vise vesa and this can be done by 3.5mm socket function (phisically). And somehow it does not reverse sound back to speaker after pull out the 3.5mm plug. All things that i had done just insert/pull out repeatly serveral times then it back to normal function. Let's try this.
ngquoctri2k said:
I had the same problem before. Finally i found that it came from the 3.5mm socket on Sbh52. Normally when you plug in the headphones then the sbh52 automatic switch the sound from speaker to headphones and vise vesa and this can be done by 3.5mm socket function (phisically). And somehow it does not reverse sound back to speaker after pull out the 3.5mm plug. All things that i had done just insert/pull out repeatly serveral times then it back to normal function. Let's try this.
Click to expand...
Click to collapse
WTFFFF...It Work!!!! Thank you mannnn:laugh:....I knew its a software failure
ikeyvan said:
WTFFFF...It Work!!!! Thank you mannnn:laugh:....I knew its a software failure
Click to expand...
Click to collapse
er, no, it's the software obeying the signal from the socket to turn off the speaker
Hello everybody . seems like my phone was broken external microphone. when I turn on the speakerphone call, the microphone does not work I need one instruction set path for handset to voice speaker mic . If you know please help me. thank you very much