HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?
CHeers,
i don't know about last version but i had the 0.2 version, maybe it's old one, but maximum i could increase my processor for 264 mhz not more, but realy i don't know if it's useful or not, cause i didn't see differance. what about other users?
OMAP ON Prophet
I do but after you turn off the device or reboot the device you have to execute the app again the only solution is to put it in the startup file. I used it on my Jasjamin and i use it at 209 MHZ, you can put more but you might experience reboot or app failure.
for alternatif you can use batterystatus, more info on mainscreen and can overclock omap too, i try till 299mhz(sometimes), and works good, you can setting for auto overclock at wakeup
can download here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#DownloadBeta
RonLion said:
HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?
CHeers,
Click to expand...
Click to collapse
[size=+2]POST #12[/size]
Be carefull
Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.
deltav13 said:
Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.
Click to expand...
Click to collapse
1. yes, it will be a bit too harsh for the processor,
2. it does consume more power,
3. it will freezes on some apps,
4. over over-clocking (over 264Mhz) may brick the device,
5. for fun ....
[size=+2]POST #12[/size]
OMAP.CAB
PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)
INSTALL AND SOFT RESET.
THE DEVICE WILL RUN IN 264mHZ.....
UNINSTALL IF YOU WISH..
p.s.
please take care the power consumption.
Use on your own risk.
[size=+2]POST #12[/size]
i keep my prophet overclocked at 286mhz with batterystatus for a year now.
i never had any unstability problems. these only occur only if using speed above 286mhz, ex:293.
At 286 works very nice, i'm so used with this speed that I'll never downclock my device
cheers
Good app and thanx for all info
Nice app....i had my mpv 600 sitting for a while now, and i have use it now with new rom and it's working fine at 264mhz
dioxda2 said:
PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)
INSTALL AND SOFT RESET.
THE DEVICE WILL RUN IN 264mHZ.....
UNINSTALL IF YOU WISH..
p.s.
please take care the power consumption.
Use on your own risk.
Click to expand...
Click to collapse
Hi dioxda2,
So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?
Thanks in advance!
chavdar said:
Hi dioxda2,
So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?
Thanks in advance!
Click to expand...
Click to collapse
Read " MUST READ.txt " first
password = dioxda2
1. below 264 is fine,
2. want to try higher? I had tested. Prophet bricks!!!!
3. use @ your own risk, default clock is 264
4. want to change the clock lower? run omap_OverClock from the startmenu/programs folder,
5. it will keep in 264 even after softreset,
6. it will keep in 264 even after power on,
7. use wakeapp to clean the notice service if neccessary (if popup occurs after uninstall),
8. or hard-reset to clean if you wish.
wakeapp =
http://www.google.com.hk/search?q=w...s=org.mozilla:zh-TW:official&client=firefox-a
have fun~!
dioxda2 - XDA forum 2006
Click to expand...
Click to collapse
I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.
wanna high?
hekimbaba said:
I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.
Click to expand...
Click to collapse
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
dioxda2 said:
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
Click to expand...
Click to collapse
Thanks dioxda2!
I used Battery status for about 2 years but I also notice significant difference between battery status and Omap.exe - about 15 MHz - > The version of Omap that I have is showing less than battery status and I think the correct value was shown by battery status
dioxda2 said:
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
Click to expand...
Click to collapse
Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.
hekimbaba said:
Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.
Click to expand...
Click to collapse
What app are you using to over clock with ?
I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?
fautorr said:
I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?
Click to expand...
Click to collapse
OMAPClock is different its a seperate aplication not a today screen plugin like bat.Status so yes it will work with Manila 2D
The most I gotten was 276 now am using 240 is stable and no problems over that and and my Device hangs I think its a Rom thing on other roms I can go up to 299 lol but on WM 6.5 the most I tryed is 240 anybody use WM 6.5 whats the limit ur Device can take then when u were using WM 6.0 and 6.1?
Related
How can I overclock the processor frequency. Some people says,that their device is running on 530MHz or on other speed. Default is the frequency 400Mhz(that we know). Is it a special tool to do that? Thanks in advance.
Yes, try Pocket Hackmaster or XCPUScalar.
Use both tools at your own risk since overclocking may destroy your device.
Sascha
keep in mind that higher frequency == lower batt time
...
...overclocking may destroy your device...
Click to expand...
Click to collapse
It doesn't help a hard-reset or a ROM upgrade via bootloader?
it's not designed to be overclocked, that said, I've overclocked mine when I need to, and it hasn't exploded/melted/refused to turn on so far...
Re: ...
TomasNM said:
...overclocking may destroy your device...
Click to expand...
Click to collapse
It doesn't help a hard-reset or a ROM upgrade via bootloader?
Click to expand...
Click to collapse
No, not if your CPU or memory chip dies.
Sascha
...
Yes understand of course. I have experiences with PC overclocking. That if is a high frequency for the processor,the computer freezes itself or doesn't start. It's working again at lower frequency. Nothing was damaged. But I've mentioned,that the CPU clock will turn back to 400MHz after HReset... Or not?
Re: ...
TomasNM said:
But I've mentioned,that the CPU clock will turn back to 400MHz after HReset... Or not?
Click to expand...
Click to collapse
Yes, it will.
XCPUScalar for instance returns to default speeds when device is not resetted by the program itself, so even after soft-reset with other tools.
Sascha
One question.
Can I use XCPUScalar for "downclock" and get more battery?
I'm pretty sure that pll use Omap and CpuScaler to overclock their device to a stable speed like 247 or 260mhz.
But my question is, inside the scaler there is a Min. speed to set. Anyone have try the best minimum speed to set?
Perhaps we should set it Min. at 100 or lower to save batery while in stand by mode?
Any suggestion?
Thank you.
Hey
I've been using overclock like this, min:100, avg:195, Max:247, Boost:260.
But now on Korand WWE 2.3 Clean, u don't need overclock!
Glad to help!
Tell me how u been using this?
alexandarpol said:
I've been using overclock like this, min:100, avg:195, Max:247, Boost:260.
But now on Korand WWE 2.3 Clean, u don't need overclock!
Glad to help!
Tell me how u been using this?
Click to expand...
Click to collapse
Can we just set the minimum to min. 69mhz? Wat will be the causes?
I'll try it out.
By the way, thanks for sharing.
I use Min=95 Avg=195 Max=273 for all WM6 ROM here ...
No problem at all, but cannot confirm for battery usage
I have tried.
Any speed below 100mhz your display would be flickering.
Just to share.
Thank yiou
That's right. So 100MHz should be the minimum.
Thanks for the info
is it safe to overclock a Pocket PC??
i downloaded XCPUScalar 3.03 and i want to know what could happen bad. is it possible to burn the CPU or to die slowly in time??
No problems, just go alittle at a time and test it. If you start having problems then back it down to the last speed that was reliable.
This is a great overclock program, you can find more about it on XDA.
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
whatever overclocking program u decide to go with make sure it has a handy temp guage! overclocking does have its overheating drawbacks. I have my wiz doin @ 247 and running a nice 87.2 deg F. with heavy usage it can jump to 98-99.? I have ran stable faster, however I know brain cells start frying around 104! so to each his own. have fun
thx for the tip. i will try to find one with temp gauge
Sledutah said:
No problems, just go alittle at a time and test it. If you start having problems then back it down to the last speed that was reliable.
This is a great overclock program, you can find more about it on XDA.
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm
Click to expand...
Click to collapse
Second vote for plusplus. Lots of features on there as well as CPU scaling. Try it and you'll never look back.
I did try batterystatus plusplus...but there is a problem, the temp gauge and consumption gauge it's not refreshing
there is a refresh option .... u can change the update speed i think it defaults at like 30 sec. so it would look as though no refresh. hope it helps
I just flashed CR86 HD myself and tried using Homescreen++ with it. The touchflo will boot any other today plugins I select, including hs++. I tried using the hs++ task manager as well, but it stops, along with the OC I'd imagine, as soon as touchflo starts.
If I have to choose, I pick hs++.
I've been running @ 260 for over a year now, no problems yet.
I camp a lot so I go the other way. I keep my wizard consistently UNDER clocked as it drastically increases battery life.
Thats why hs++ is so good.
You can use the option to scale bettwen a downclock and a overclock.
so when its necessary your device overclock, but if its in standbye its downgrade the clock.
Doing this you hardly see a incresse of battery drain.
I use my device with batterystatus and now HS++ over then 3 years and i never have any problem.
always use with clock bettewen 143mhz and 273 mhz
hello , i also have a i-mate k-jam , and i want to overclock it . i want a program that chooses automatic the cpu speed between 140-260 for example . what program do you recomend ? i already have the 2.26 rom and wm 6.1 and it's worcking preety good . ( i don't want to change the wm , i want just the over/underclock program) thanks
using HS++ ive had my Wizard overclocked to 276mhz for over 2 years....never had a problem
Hs++ is coooooool! I tried it now and my wizard's performance is fantastic! Yeeeeeee! Im so happy!
Hi to All!
I've Installed HS++ (ver. 1.06.349 build 0349 ) and i have two problems:
1 - For use it, i must disable TouchFLO, can they work together ?? if yes, how can i do this?
2 - in OMAP menù, when i click the "get" button for overclock, the phone freeze.
EDIT:
I've installed SecondToday 0.42, and now i can load TouchFLO and HS++ together (and when i enable overclock it works!!!)
but, i always need SecondToday now? or there are other methods?
(sorry for my bad English )
AT Last: I agree with You, HS++ is Great and also SecondToday is Great
Thank You All!
299MHz
I've overclocked to 299MHz with batterystatus without any problems for at least 2 years. of course battery life is significantly shorter, but i can live with it. i use scaling when on the road to preserve power, but don't see much difference between 195MHz and underclocked to 99MHz. Tried 312MHz, but my wizard used to freeze after some time (few hours usualy)
hey
hey i recently got the qtek 9100 (3 days ago) , this is my 1st windows mobile toy i ever had. i love it , its pretty nice, i just did hard spl, which worked great i can now install whatever i want. i installed home ++ too , and in 1% cpu load it does 96 F. should i be worried? it`s overclocked at 247 mhz. should i turn it off , and just quit overclocking? truth is i love how it moves now, it was a bit lazy befroe overclocking. waitin` for a reply , thanks alot !
I got question : I have wm6.5, installed hs++ and don't know how to get to overclocking menu ? I can't find it ? where it is ? or does it don't work with wm6.5 ?
does this app work on Streak?
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
998Mhz is the limit for the kernel. you need a kernel that can be overclocked for that option....
it works fine. at this moment in time you can not overclock but it auto detects settings just fine and you can set screen off speed/battery low speed to extend your battery life.
crazy cat said:
I tried out and nope, it don´t work how it should. It says the Streak is running with 998 Mhz and you can´t overclock it. Waiting for update...
Click to expand...
Click to collapse
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
zgmf-x322a said:
Wait, u know there are three levels of clocking, right? one is under clock, one is clocked and one is over clock. There are two frequencies when u turn on the setcpu, one is max and one is min...but i would like to know if u r able to make the max and min both up to 998mhz so that it can run at full speed at all times
Click to expand...
Click to collapse
yes you can bro. both max & min are customizable from 24500Mhz upto 99800Mhz. however, ive found that having the streak running totally max when the screen on will simply drain your battery, there are no real speed improvements to be seen. a good compromise to combat lag would to be to set screen on: 76800 - 99800Mhz.
i completely downscale mine when the screen is off and although the battery life on the streak is good, doing this makes it even better. no lag when switching screen on either (frequency change)
Works great for me too! I don't see any need for overclocking a phone (unless you don't use it as a phone..)
I unplugged mine from the charger about 1.5 hours ago, still 100% battery..
thanks guys for the reply, appreciated it alot!
it does and very well
to get interactive setting you must at least have performance fix and it will let you overclock and add interacting setting i just did perf. fix and setcpu settings and now quadrant score of 1700+
Works great for me. Flash smokku and fard's djsteve kernal perfmod using clockwork or streak mod and then you can overclock using setcpu. Look at my signature line below.
Dell Streak, 2.2 froyo (318), custom kernel, OC to 1.2ghz, quadrant 2002, hspda signal mod,
Hey guys,
I have just installed OmegaRom by Team Cooper and what a Rom it is!!! Amazing is an understatement.
Okay so with there new Rom v2, it has an OC kernal built in and it does work...BUT I need to know how to OC the thing safely and squeezing as much performance as possible!
I have it at 825 and min 806 mhz, scaler is performance.
What settings would you pro's recommened?
Thanks!
Edit 1- I am using SetCPU to OC.
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
an0nym0us_ said:
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
Click to expand...
Click to collapse
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
davalav said:
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
Click to expand...
Click to collapse
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
CPU Tuner
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
sreesh87 said:
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
Click to expand...
Click to collapse
I have OCed it to 902 mhz..
Sent from my GT-S5830 using XDA App
Thanks for the comments guys... Gives me a rough estimate on its limits.
So far I have been running 844mhz performance for a while, since I created this thread and the battery has remained at 82%!
I have benched using AnTuTu twice and have excellent read and write speeds, compared to other benchies I have seen, OmegaRom is the best Rom I have ever used!
Cheers,
i tried cpufrills and its the best for me
I don't Think U mustuse over clocking,even my setting was min245 max 902,the effect just draining more battery,and if using to much can damaging ur prosessor
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Rushyang said:
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Click to expand...
Click to collapse
Don't worry! Like I said, I have experience O/C'ing processors etc and I know how bad the effects can be! I am not going for a massive overclock at all. Just a tiny bump in the speed. At the moment, I am running 825mhz and already the speed has improved dramatically. I may go a little further but 902mhz is a bit mental for my liking.
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
SetCPU is free for XDA members and it's the best one ever...period
http://forum.xda-developers.com/showthread.php?t=505419
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
setCPU is free to if you download it from the forum