I just got the data plan, finally, and I am one of the many noobs that didn't read any instructions and went ahead and flashed without writing down all that useful EPST info. I have gotten "a" data connection, but it seems to be terrible, and I know it supposed to be much better.
My question is, is there any difference in a "dial-up" connection and a higher speed connection in terms of icons. It shows that I am in an EVDO coverage area, but under connections it shows a dial up connection.
I never used the data on the mogul before, so I'm not sure if I need to call Sprint Customer Service, or just deal with their crappy data in my area.
Thanks for the help
You should have an "Ev" icon at the top somewhere as far as I know.
Telling us what ROM and radio you flashed might help us help you.
Make sure it still says EV at the top when you are online, if the EV changes to a 1X then something is wrong with your configuration.
BTC
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D.
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D. I have the EV symbol, i just wanted to know if it should say I have a dial up connection as well whenever I'm using data or if that is the wrong one.
thanks for your help
used2hvatreo said:
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D. I have the EV symbol, i just wanted to know if it should say I have a dial up connection as well whenever I'm using data or if that is the wrong one.
thanks for your help
Click to expand...
Click to collapse
Did you install the carrier cab? If not, it would make your data connection not work.
EVDO dials up just like 1X, it is just able to connect at a faster speed.
BTC
unL33T said:
Did you install the carrier cab? If not, it would make your data connection not work.
Click to expand...
Click to collapse
yeah i installed the newest one, august 08 i believe, and got EPST to work so I could make changes, and i get a data connection, its just terrible.
well i took it to a sprint guy i know, and he had a tech look at it. the verdict he had was that my "downloaded software" was causing it to slow down. i just laughed and said thanks. his idea of downloaded software was my ROM, and i cannot believe that dcd has created a ROM that slows down internet connections.
any ideas?
Edit:
eek, double post
i did the same thing.. flashed without writing down the EvDo password (known as the HDR AN AUTH LONG password in EPST.
The method to extract your EvDo password is to use CDMA Workshop to do a memory dump and then use a Hex Editor to read the data and obtain a 16 digit hex number which is your EvDo password..
Havent been able to figure this out.. Some programs already have a built in EvDo password reader..
Good luck if you can suss this one out!
1X is approx 150 kB/s download speed
EvDo is around 1500 kB/s download speed
(New Zealand) I'm not sure if it's the same in your area/country
Cheers
Damager said:
i did the same thing.. flashed without writing down the EvDo password (known as the HDR AN AUTH LONG password in EPST.
The method to extract your EvDo password is to use CDMA Workshop to do a memory dump and then use a Hex Editor to read the data and obtain a 16 digit hex number which is your EvDo password..
Havent been able to figure this out.. Some programs already have a built in EvDo password reader..
Good luck if you can suss this one out!
1X is approx 150 kB/s download speed
EvDo is around 1500 kB/s download speed
(New Zealand) I'm not sure if it's the same in your area/country
Cheers
Click to expand...
Click to collapse
I saw that the HDR AN AUTH LONG was all gibberish in the settings, and I was curious if that was supposed to be something. Does anyone know if that's something that Sprint should be able to give me, or am I going to have to just wait and have an "accident" with this phone?
No idea, I get about 100-300kbps over EVDO though.
evdo
you could try running your carrier cab again (after deleting the existing modem connection for data). Verify that it is not weak signal by going somewhere with a known good evdo signal
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
ghostyroasty said:
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
Click to expand...
Click to collapse
Yes. Just FYI the Data will not work while you are in a call unless you have WiFi turned on.
well, because its useful to others who might be in the same boat, I will continue replying, but I figure out another way to get data, and that was to get sprint to change my mogul into a touch pro...
I have run the carrier cab a couple of times now, and its verified that i have the crappy data, but i can't figure out how to get the HDR AN PASSWORD (Long) other than to do a dump, and i don't think i'm gonna go thru that trouble since i send the thing back tomorrow.
ghostyroasty said:
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
Click to expand...
Click to collapse
I have the same thing happen to me always, I will have full bars in EV, but when I make a call, it switches to 1X. This is the same for data.
used2hvatreo said:
well, because its useful to others who might be in the same boat, I will continue replying, but I figure out another way to get data, and that was to get sprint to change my mogul into a touch pro...
I have run the carrier cab a couple of times now, and its verified that i have the crappy data, but i can't figure out how to get the HDR AN PASSWORD (Long) other than to do a dump, and i don't think i'm gonna go thru that trouble since i send the thing back tomorrow.
I have the same thing happen to me always, I will have full bars in EV, but when I make a call, it switches to 1X. This is the same for data.
Click to expand...
Click to collapse
The Ev means that youre in an area that has EvDo mobile broadband capability. When you make a phone call, that will always change to 1X because phone calls run via the 1XRTT network.
When you connect to the net, your phone will try firstly to connect to the EvDo mobile broadband network but because you dont have the correct EvDo password (HDR AN AUTH LONG password) it will instead drop down to the 1XRTT network.
I ended up getting a second hand Titan and made sure i wrote down the EvDo password before upgrading and flashing. So now when i hit the net, it doesnt go to 1X. The Ev icon stays the same which verifies that im on the EvDo broadband network instead of the 1XRTT network.
While connected to the EvDo mobile broadband network, you can still receive calls, texts. On the 1xRTT mobile broadband network, you wont be able to receive calls or texts.
Hope this clarifies things.
Related
Carrier: Alltel
Started with WM5 ROM.
Flashed to DCD's 2.1 WM6 ROM last week, no issues noted.
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
I've moved back to 2.1, used no2chems 6.1 ROM and back to DCD's 6.1 ROM. Same problem all around now.
Radio problem maybe? Or user? If radio, anyone get me a link to the original 1.4?
Thanks in advance if anyone has any tips, I've tried looking around but only find people with MMS or other issues.
---------------------
This solution apparently only works for Alltel customers, if anyone finds solutions for Sprint/Verizon/Telus I'll add the solution to this post.
ALLTEL:
1. Enter EPST (##778), Edit (password= 000000).
2. View Info (left soft key).
3. Choose the "Security" item.
4. In the "HDR AN AUTH Password(LONG)" field, click to highlight.
5. Menu (right soft key), Edit
6. In the "Value" field, enter your Hex ESN (make sure all characters are CAPITAL, lowercase will FAIL).
7. Ok. Menu. Ok to save, then reset.
--------------------------------------------
SPRINT:
MADMARTlGAN said:
Hey in case you guys are still having problems with this, I can tell you what worked for me with Sprint.
You'll need your unlock code, if you don't have it, you've gotta get it from either Sprint or from one of the tutorials i've seen floating around here and other forums.
1. Sync your titan to back up your data.
2. ##786# Choose edit, enter your unlock code, then choose menu>restore. This will reset everything to factory settings.
3. Reset
3. ##UNLOCKCODE# Again choose edit.
4. Both MDN and MSID should be your wireless number (this was confirmed by Sprint T2 tech support)
5. Reset
6. Call your voicemail to make sure your phone service is working.
7. Connect to the internet. It should trigger IOTA/Provisioning and then EVDO should be working.
8. Resync your **** and you're good to go.
Hope this helps, it worked for me.
Click to expand...
Click to collapse
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Americanmetal said:
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Click to expand...
Click to collapse
Thanks for the response, I've been through that already and same results...
I even went back to the stock Alltel ROM and Radio, same thing.
With PRL 30029 AND 40029...
Oh well, I'll figure something out as I love the speed of DCD's 2.2!!!!
jake1s said:
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
Click to expand...
Click to collapse
Did you check Start->Settings->Personal->Phone->Services->Mode of Operation to make sure it wasn't set to 1X only? I think that was the default setting on my phone.
I had this same problem, and then I reflashed with the 3.16 sprint rom twice and it went away.
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
jake1s said:
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
Click to expand...
Click to collapse
With the newest Advanced Config app, you can unhide the "mode of operation" option in there. I got it from here somewhere, do a search. I doubt this is your issue. I had this problem yesterday with Sprint. I got data in 1xRTT, but not EVDO. I ended up calling Sprint and they had to deactivate and reactivate the internet services on my phone. Immediately it worked like a champ.
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
THANK YOU! THANK YOU! THANK YOU!
That did the trick (after I did it a second time and made the letters capital) and now I'm cruising EVDO style!!
Thanks!!!!
Hi I have this same issue.
i typed ##778 send
and get the view, edit , and cancel options.
do i find the hdr password under the edit?
when i choose edit, i get a password prompt and i do not know the password.
i am on dcd rom 2.2.0
i edited mine, and it does get on ev instead of 1x so i was glad but when i opened ie i cant get a data connection up now at all???
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
My HDR password is also extended ASCII characters, has been for every ROM version I have run, and I get EVDO and on the Internet as well. I thought that was a problem when I had no data connection from a previous ROM, but it wasn't.
What worked for me was to go all the way back to the official 2.17, then to the leaked 3.16, etc. I made sure everything was set up and working properly on each version before moving on to another ROM.
excess4 said:
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
Click to expand...
Click to collapse
not true there is a program to find out the msl code for your phone if i was on computer i would give u guys the link
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
Again, I'm on Alltel so maybe for some unknown reason there is more to it for you Sprint users.
But, my MDR Password field was goofy stuff, deleted it and put in my Hex ESN in ALL CAPITALs and I stay at EVDO when my data connection is made now.
Deleted MDR PASSWORD and put esn hex, internet not working
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
yes i also have a bunch of giberish in there. i am afraid to change it becuase there will be no way for me to put that giberish back in there with all those weird looking characters.
i found the edit password which was a bunch of 00000 as many as the field would take
and i understand some people now get ev but no data connection now. i am on verizon and i dont know if that will happen to me as well.
my connection now says ev and doesnt change back to 1x anymore so i am going to leave this as is for now and not change it.
also my a-key is blank if that makes a difference. phone works fine though.
whatbish said:
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
Click to expand...
Click to collapse
you mean hdr password right? I did not see an mdr password listed anywhere
i upgraded rom and radio (dcd 2.2 and 3.16 radio). everything works fine except my data connection. it says sprint (dial up) is connected but sprint pcs doesn't connect. any help would be greatly appreciated.
Can you make calls? Can you send txts?
try a restart and load up google.com if it doesnt work then i recomend a hard reset
if you cant make calls check your msid
yes i can make calls and send texts. the internet connects just not on sprint pcs network. it is some sprint (dial up) network and it is super slow.
Sounds like IWF
Greetings,
Sounds like he is making an old style CDMA data call that is what we used before 1xRTT or EVDO, and it is still supported so probably falling back to it because his settings for 1x are not right, but since his phone is ok he can make the old style calls. Make sure that your data call is dialing #777.
it tries to dial 777, but then connects to the sprint dial up
honestly i would call sprint and see if they could update your prl
either that or drive to a area that has evdo and try it there
sfld said:
honestly i would call sprint and see if they could update your prl
either that or drive to a area that has evdo and try it there
Click to expand...
Click to collapse
Yep, thats most likely the issue... something isnt authenticating for data correctly.
i updated prl to 60611, ran iota and still same thing. i can connect to internet but it is really slow, says im connected to sprint(dialup) but not sprint pcs.
I'm new to the forum and this is my first post so be easy on me. I've been reading as many threads as I can to enable/disable my Rev-A on my XV6800. I'm running dcd 3.0.1 and radio 3.35.04. As far as I got was dial ##778, click edit, enter unlock code (what I've got is 000000), press view info, press Data Parameters and Rev-A should be under Packet Dial String but it's not there. Can anyone help a bro out?!
REV-A does work
I work in the switch and logged into the network side and see REV-A session on mine and speed tests bear it out, but the phone has no REV-A indicator. Trust me, if you have REV-A coverage where you are it is working.
Thanks. I'm in Oakland, CA and I've confirmed it's a Rev-A zone. I just wanted to make sure I'm getting speeds like everyone else. I understand it has nothing to do with how fast ie is though? Cuz my ie isn't as fluid (freezes for seconds) as my stock Verizon rom.
Ever since I upgraded to the new radio 3.35.04 I have not been able to get my phone to run in EVDO Only Mode. It will not acquire a signal, but keeps searching for one endlessly.
I use EVDO only mode to keep incoming calls from kicking me off the internet when I'm downloading or uploading files while using my mogul as a modem for my pc.
I am a Sprint user. Any other Sprint users with DCD's rom having the same problem?
EVDO revA works fine as long as I have my phone in Hybrid mode. I'm currently using DCD's 3.0.4 Sprint ROM.
Thank you for your feedback.
actually the only problem im having id when i turn the phone on if its not set to sprint only network mode then it will try to find a signal forever and wont do evdo it will be in 1x... and when it does find a singal im on the kricket network and cant make calls pretty fuc%3d up
moovius said:
Ever since I upgraded to the new radio 3.35.04 I have not been able to get my phone to run in EVDO Only Mode. It will not acquire a signal, but keeps searching for one endlessly.
I use EVDO only mode to keep incoming calls from kicking me off the internet when I'm downloading or uploading files while using my mogul as a modem for my pc.
I am a Sprint user. Any other Sprint users with DCD's rom having the same problem?
EVDO revA works fine as long as I have my phone in Hybrid mode. I'm currently using DCD's 3.0.4 Sprint ROM.
Thank you for your feedback.
Click to expand...
Click to collapse
Problem Solved: apparently I have been too hasty to think EVDO ONLY MODE was not working. This time I let it seek for a tower for up to 5 min (I think) and all of a sudden it works in EVDO ONLY MODE.
All it took was letting it get a lock on the tower that one time (it has zero delay too). So that's nice.
how can i get my phone to get into EVDO only mode? Please point me in right direction. Thank You. I will also search google and this site.
NitrousGT said:
how can i get my phone to get into EVDO only mode? Please point me in right direction. Thank You. I will also search google and this site.
Click to expand...
Click to collapse
Dude, you know you can't make voice calls or text in EVDO only mode right?
Some one PLEASE help i have tried to run several prl's including the 1007 i think it was anyhow (the latest 3g prl..) only 1x works for my raphael on cricket ...im getting frustrated... thanks
Wait... Cricket has 3G EVDO? No way... only seen there stuff work at 1x.
jnellz said:
Some one PLEASE help i have tried to run several prl's including the 1007 i think it was anyhow (the latest 3g prl..) only 1x works for my raphael on cricket ...im getting frustrated... thanks
Click to expand...
Click to collapse
You will only get 1x on a CDMA phone flashed to Cricket. They use a different band for their 3G that is not supported by Sprint / Verizon Phones .. It's a Cricket Thing.
THANKS SO MUCH thats what i figgured i just needed a second opinion DAMN! HTC FUZE
Here i come
Uh well, not true. Def not true. Im new to this flashing stuff, only on my second day. I purchased my vogue already flashed to cricket but it was VERY GENERIC. No touchflo, nothin, just windows 6.0 nothin else. It was getting evdo signals at that time, but i needed to reset some registry settings, which i did and was getting evdo signals with working internet and mms....THROUGH EVDO......NO BS THIS WAS JUST a day or 2 ago. But, problem was, i put touchflo on it, and didnt realize that the previous owner had somehow filled up the memory on the phone with applications and files that were nowhere to be found. It was crawling...So my solution.....? I decided to re-flash it myself because i knew that would delete all the useless stuff on the phone that i had no use for. I flashed the stock sprint rom from the htc website to get the most current radio, then unlocked the phone, then re-programmed it. When i got the phone it already had the 1050.prl file on it, which is an EVDO PRL!!! Go to corolada.com and look at the left side of the page and there is a list of EVDO AND NON EVDO CRICKET PRL's 1050 being the most universally recognized. Fast forward to now, I have finally found a rom that is fast and clean that i plan on keeping. Well now theres a whole nother problem. My phone is no longer recieving EVDO signals. BUT CRICKET HAS WORKING EVDO I KNOW FOR A FACT I have had so many cricket phones that connected to pic messaging and internet through evdo. Im sorry if i misunderstood your post and you were just saying that a flashed phone from sprint cant get evdo, but either way, i know for a fact that a flashed sprint phone is fully capable of sending and recieving cricket evdo signals because i was surfing the net on my vogue through cricket evdo just a day or two ago. Can anyone figure this out??? IVE tried reloading the prl. ive tried different prl's. ive even tried puttin the original sprint prl on the phone and then changing it back to the 1050 cricket prl, and to no avail, no evdo signals. someone please help, im pulling my hair out. why couldnt i just leave the phone alone when it had evdo? why did i have to go and try to make it pretty?????
sound like it's not authenticating ##DEBUG# ,debug info,"HDR" it should be 1=Athenticated
if not, ##778# , M.I.P Default profile, Delete AAA & HA shared secret & resest
jtmfnslim said:
sound like it's not authenticating ##DEBUG# ,debug info,"HDR" it should be 1=Athenticated
if not, ##778# , M.I.P Default profile, Delete AAA & HA shared secret & resest
Click to expand...
Click to collapse
HERES SOMETHING I GOT FROM "HOFO" that might help out some of u cricket people with PST setting issues/ hope this helps a lil:
==========================================================
CRICKET PST Settings Thread! by Ryan Mogul
This is for people who want Cricket to work perfectly, just follow these instructions not skipping a beat and you will be OK from then on! If you are not having problems obviously skip this!
This thread is assuming that you already have your phone Unlocked(spc code all zeros) It is also assuming that you already have a CRICKET PRL file loaded in PST. If you have my ROM flashed than PRL's are on device memory we will get to that below.
1. Now first thing you want to do is have a good Cricket ROM installed like "clears throat* Mine lol.
2. Now if you are starting from a fresh flash OK, if you are starting from a Hard reset OK, we can continue. If you have a ROM installed that is having problems I recommend a hard reset and skip customizations using stylus when it says you have 3 seconds.
3. Now open your Phone Application and go to options and make sure smart dial is off. Then dial ##778 call button, now click edit and enter six zeros. Now click view info and goto PRL, now check to make sure you have a CRICKET PRL(1013,1014,1050 etc.. there are others)If you dont have one loaded and you are using my ROM then you can click update and it should goto main root, pick prl 1050. Let it do its thing and restart. If you already have a CRICKET PRL then skip the update step.
4. Now cancel out of EPST if you didnt update PRL. (for both people who had to restart and people who didnt) <--open phone application again and dial *228(this will make sure base settings are good so i will not have to explain as much, it will also download a local EVDO prl to where you are), it will dial cricket and do its programming thing. Do not interupt this. Let it do its thing even if it restarts. Now when you are back in action we can continue.
5. Open phone application and dial ##778 call button, now click edit and enter six zeros. In main page the only two things we are going to do is change the NAM name to Cricket, and check the MSID number make sure its a 10 digit number thats in your area code BUT it IS NOT your PHONE NUMBER!! If its fine we can continue, if not you may of skipped the *228 step so you need to do that or you need to obtain this from calling Cricket.
6. Now click view info and goto AKEY and make sure its blank, nothing there. Now click view info and goto NAM settings, NAM name should be Cricket, Mobile Directory number should be YourTenDigitPhoneNumber, MIN1 should be that other phone number the (MSID) that is not your phone number! but it should be 7 digits, ex: sevendigitnumber, MIN2 should be just your area code. MSID should be 10digitMSIDnumber <--again not yourphonenumber!, MCC should be 310, MNC should be 00, NMSI should be your MSID(XX10digitnumber<--not your phone number) THE XX'S should be zeros, ex: 007185548692, Now if all these settings in this paragraph didnt need touched assuming you didnt skip any of my steps(which they shouldnt be touched i am just making sure) we can move on.
7. Click view info and goto CDMA settings, we are going to make sure they are set right and change a couple things for Clearer voice transmissions, people will compliment how good your phone sounds even in some cases. EVRC should be set at Disable, Home page should be Voice 13k, the Two below it the Same Voice 13k.
8. Click view info click modem settings, change slot cycle index to 1, This will make the phone ring a little sooner, also get your texts a bit sooner. The other 4 options should be Auto, Auto, Enable, No in Order from top to bottom.
9. Click View Info and pick Security, now we are changing this regardless you must do this, we are going to Unauthenticate you and Re-authenticate, it is a Needed step everything in this How To needs to be done and Not skipped! Change the HDR Auth User ID to something bogus like [email protected], the passord below it make it something random but remember it, now do the same for PPP user ID and password but make them the same as the HDR ones.
10. Click view info and pick MIP Settings, Make sure Active Profile is on 0, MIP mode should be Simple IP only, MIP reg retries should be 1, MIP reg retry timeout should be 2000 ms, MIP pre-reg timeout should be 30, Mobile Node HA auth should be Disable, send a reg request should be Enable, dormant handoff to disable.
11. Click view info and pick MIP Default Profile, Enable profile should be enable, NAI should be [email protected], MN HA SPI set should be enable, MN HA SPI value should be 12c, MN AAA should be enable, MN AAA SPI value should be 2, reverse tunneling should be enable, home address should be 0.0.0.0, Primary HA address should be 68.28.15.12, secondary should be 68.28.31.12, HA shared secret and AAA secret should be cricket <--lowercase, DMU public should be 0, MN Authenticator should be 0.
12. Click view info and pick MIP customer profile 1 and make sure its Profile enabled is disabled. Now do the same with the other 4 below it.
13. Ok now click menu, ok and let it reset, but make sure not to do anything we are going to be going right back INTO EPST, so when it boots back up open the Phone application and dial ##778, we are going to re-authenticate you its easy, now click edit and enter six zeros, click view info and goto Security, now change the HDR AN Auth to yourtendigi[email protected], password should be cricket<--lower case, same for PPP user id and Password make them same as HDR.
14. Click view info and goto MIP default profile, make sure the HA, and AAA shared secrets are both cricket<---lowercase, then click menu OK and let it reset.
Thats it! PST settings are perfect for CRICKET, you have a Local EVDO prl file installed, and you are Authenticated for Data and EVDO, now if you used my ROM just go to internet explorer and goto a real page, and follow instructions but remember to click save password!
Thats done, every flash from now on should never affect your PST settings and you should always be authenticated. I hope this helps everyone.
Cricket 3g network
I just got off the phone with cricket customer service. I wanted to upgrade to there 3g network. The representative said,"the 3g is reserved for original cricket phones.
it doesnt matter if you put a 3g prl on the cdma raphael because it is a dual band phone and crickets 3g network only works on their new triband phones so your still stuck with 1x and evdo