Related
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
jamesfelarca said:
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
Click to expand...
Click to collapse
It sounds like you let the Sprint customizations run. Sound about right?
Here's what I had to do after the Sprint customizations locked me out of the PST:
Geckotek said:
I flashed back to the stock VZW ROM (third time I think), I made sure all of my provisioning issues with Verizon were worked out (finally had the tech "kick the switch").
1) Then I proceeded to load the 2.4 bootloader,
2) then the 3.16 Unauthorized Sprint ROM w/ radio,
3) then finally installed a cooked DCD 2.3.2 ROM.
Things to note:
1) I never let the Sprint ROM boot up
2) I had no signal so ran *22802 then hit End as soon as it connected
3) Still no signal after reboot
4) No A key, MSID, or MDN issues, but I did re-enter the MSID and MDN as discussed in other threads
5) After re-entering MSID and MDN then after reboot I had signal
6) never had to run *228 to OTA program (in the past programming with *228 has reversed the effect of re-entering the MSID and MDN)
In general, I feel that the OTA from VZW sends down some programming that conflicts with the 3.27 radio...but I have nothing to prove that.
GPS is running great (I just loaded the AstroGPSLauncher)
Not sure about Rev A. It does seem snappy. What's a good site to test from the phone?
I'm happy and not re-flashing until a solid radio for Verizon arrives.
Click to expand...
Click to collapse
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
I have Alltel and DCD's 1.7.x ROMS are GREAT! No GPS but I don't need it.
you have a link to the ROMs??
jamesfelarca said:
you have a link to the ROMs??
Click to expand...
Click to collapse
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
A) What my instructions help with is flashing a Sprint ROM to a non-Sprint phone
B) My instructions show you the only way I've ever seen how to remove the MSL from the phone.
So if you want your phone to work correctly, I suggest you give it a try. Your mistake was letting the Sprint customizations run....as far as I know, that is not easily reversible.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
Click to expand...
Click to collapse
Based on my experience, reflashing the ROM doesn't remove the MSL lock applied by the Sprint ROM. That's why I reverted to the stock bootloader and ROM/Radio.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine.
Click to expand...
Click to collapse
Glad it works for you. I had problems with the radio. I was only receiving about 2/3 of sent SMS and OfficeSync did not update properly.
Here is a link to DCD's 1.7.0 here: http://forum.xda-developers.com/showthread.php?t=372853
I used the kitchen and it works very well for me.
i have alltel and update my ppc6800 fine all i had to do to remove the indicator icon was to do *228 option 3 wich is activate.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
I'm not sure how to change the MCL back to 000000 but if you haven't already you should be able to use GetSPC to obtain the code for your device. Once you're in EPST check your Home SID to make sure this is correct. If not there's a good chance you'll be roaming all the time. Also make sure you have the newest PRL (*228 Option 2)
For your internet connection, check EPST Security and M.IP Default Profile and make sure your NAI and UserIDs are set to your phone number @alltel.net and your AAA shared secret and PPP Password should be "alltel" without the ". Your HDR AN AUTH Password should be your ESN (Hex).
I recommend dcd 2.32 also. It's what I'm using and it's working great.
Sounds like everyone else covered the how to's... but before you try anything else you might want to wait for DCD's new kitchen which will work with the official radio released for Sprint today.
Roaming Order
Does anyone know if there is a way to change the order of carriers my phone tries to roam to?
I have Alltel and apparently Sprint is at the top of there list. I live in an area where Sprint service sucks and there is no EVDO, but the Sprint tower is just close enough to be seen so I never get onto the Verizon Towers. I would like to set my Roaming order to be Verizon first then Sprint etc...
Thanks,
mr.ellsworth
Ever since I upgraded to the new radio 3.35.04 I have not been able to get my phone to run in EVDO Only Mode. It will not acquire a signal, but keeps searching for one endlessly.
I use EVDO only mode to keep incoming calls from kicking me off the internet when I'm downloading or uploading files while using my mogul as a modem for my pc.
I am a Sprint user. Any other Sprint users with DCD's rom having the same problem?
EVDO revA works fine as long as I have my phone in Hybrid mode. I'm currently using DCD's 3.0.4 Sprint ROM.
Thank you for your feedback.
actually the only problem im having id when i turn the phone on if its not set to sprint only network mode then it will try to find a signal forever and wont do evdo it will be in 1x... and when it does find a singal im on the kricket network and cant make calls pretty fuc%3d up
moovius said:
Ever since I upgraded to the new radio 3.35.04 I have not been able to get my phone to run in EVDO Only Mode. It will not acquire a signal, but keeps searching for one endlessly.
I use EVDO only mode to keep incoming calls from kicking me off the internet when I'm downloading or uploading files while using my mogul as a modem for my pc.
I am a Sprint user. Any other Sprint users with DCD's rom having the same problem?
EVDO revA works fine as long as I have my phone in Hybrid mode. I'm currently using DCD's 3.0.4 Sprint ROM.
Thank you for your feedback.
Click to expand...
Click to collapse
Problem Solved: apparently I have been too hasty to think EVDO ONLY MODE was not working. This time I let it seek for a tower for up to 5 min (I think) and all of a sudden it works in EVDO ONLY MODE.
All it took was letting it get a lock on the tower that one time (it has zero delay too). So that's nice.
how can i get my phone to get into EVDO only mode? Please point me in right direction. Thank You. I will also search google and this site.
NitrousGT said:
how can i get my phone to get into EVDO only mode? Please point me in right direction. Thank You. I will also search google and this site.
Click to expand...
Click to collapse
Dude, you know you can't make voice calls or text in EVDO only mode right?
I just got the data plan, finally, and I am one of the many noobs that didn't read any instructions and went ahead and flashed without writing down all that useful EPST info. I have gotten "a" data connection, but it seems to be terrible, and I know it supposed to be much better.
My question is, is there any difference in a "dial-up" connection and a higher speed connection in terms of icons. It shows that I am in an EVDO coverage area, but under connections it shows a dial up connection.
I never used the data on the mogul before, so I'm not sure if I need to call Sprint Customer Service, or just deal with their crappy data in my area.
Thanks for the help
You should have an "Ev" icon at the top somewhere as far as I know.
Telling us what ROM and radio you flashed might help us help you.
Make sure it still says EV at the top when you are online, if the EV changes to a 1X then something is wrong with your configuration.
BTC
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D.
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D. I have the EV symbol, i just wanted to know if it should say I have a dial up connection as well whenever I'm using data or if that is the wrong one.
thanks for your help
used2hvatreo said:
sorry, i'm running reloaded 4, which i believe is dcd 3.2.6 with the touchFlo 2D. I have the EV symbol, i just wanted to know if it should say I have a dial up connection as well whenever I'm using data or if that is the wrong one.
thanks for your help
Click to expand...
Click to collapse
Did you install the carrier cab? If not, it would make your data connection not work.
EVDO dials up just like 1X, it is just able to connect at a faster speed.
BTC
unL33T said:
Did you install the carrier cab? If not, it would make your data connection not work.
Click to expand...
Click to collapse
yeah i installed the newest one, august 08 i believe, and got EPST to work so I could make changes, and i get a data connection, its just terrible.
well i took it to a sprint guy i know, and he had a tech look at it. the verdict he had was that my "downloaded software" was causing it to slow down. i just laughed and said thanks. his idea of downloaded software was my ROM, and i cannot believe that dcd has created a ROM that slows down internet connections.
any ideas?
Edit:
eek, double post
i did the same thing.. flashed without writing down the EvDo password (known as the HDR AN AUTH LONG password in EPST.
The method to extract your EvDo password is to use CDMA Workshop to do a memory dump and then use a Hex Editor to read the data and obtain a 16 digit hex number which is your EvDo password..
Havent been able to figure this out.. Some programs already have a built in EvDo password reader..
Good luck if you can suss this one out!
1X is approx 150 kB/s download speed
EvDo is around 1500 kB/s download speed
(New Zealand) I'm not sure if it's the same in your area/country
Cheers
Damager said:
i did the same thing.. flashed without writing down the EvDo password (known as the HDR AN AUTH LONG password in EPST.
The method to extract your EvDo password is to use CDMA Workshop to do a memory dump and then use a Hex Editor to read the data and obtain a 16 digit hex number which is your EvDo password..
Havent been able to figure this out.. Some programs already have a built in EvDo password reader..
Good luck if you can suss this one out!
1X is approx 150 kB/s download speed
EvDo is around 1500 kB/s download speed
(New Zealand) I'm not sure if it's the same in your area/country
Cheers
Click to expand...
Click to collapse
I saw that the HDR AN AUTH LONG was all gibberish in the settings, and I was curious if that was supposed to be something. Does anyone know if that's something that Sprint should be able to give me, or am I going to have to just wait and have an "accident" with this phone?
No idea, I get about 100-300kbps over EVDO though.
evdo
you could try running your carrier cab again (after deleting the existing modem connection for data). Verify that it is not weak signal by going somewhere with a known good evdo signal
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
ghostyroasty said:
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
Click to expand...
Click to collapse
Yes. Just FYI the Data will not work while you are in a call unless you have WiFi turned on.
well, because its useful to others who might be in the same boat, I will continue replying, but I figure out another way to get data, and that was to get sprint to change my mogul into a touch pro...
I have run the carrier cab a couple of times now, and its verified that i have the crappy data, but i can't figure out how to get the HDR AN PASSWORD (Long) other than to do a dump, and i don't think i'm gonna go thru that trouble since i send the thing back tomorrow.
ghostyroasty said:
Just curious... I have the Ev for data... but when I place a call, it changes to 1X.. Is this normal?
Click to expand...
Click to collapse
I have the same thing happen to me always, I will have full bars in EV, but when I make a call, it switches to 1X. This is the same for data.
used2hvatreo said:
well, because its useful to others who might be in the same boat, I will continue replying, but I figure out another way to get data, and that was to get sprint to change my mogul into a touch pro...
I have run the carrier cab a couple of times now, and its verified that i have the crappy data, but i can't figure out how to get the HDR AN PASSWORD (Long) other than to do a dump, and i don't think i'm gonna go thru that trouble since i send the thing back tomorrow.
I have the same thing happen to me always, I will have full bars in EV, but when I make a call, it switches to 1X. This is the same for data.
Click to expand...
Click to collapse
The Ev means that youre in an area that has EvDo mobile broadband capability. When you make a phone call, that will always change to 1X because phone calls run via the 1XRTT network.
When you connect to the net, your phone will try firstly to connect to the EvDo mobile broadband network but because you dont have the correct EvDo password (HDR AN AUTH LONG password) it will instead drop down to the 1XRTT network.
I ended up getting a second hand Titan and made sure i wrote down the EvDo password before upgrading and flashing. So now when i hit the net, it doesnt go to 1X. The Ev icon stays the same which verifies that im on the EvDo broadband network instead of the 1XRTT network.
While connected to the EvDo mobile broadband network, you can still receive calls, texts. On the 1xRTT mobile broadband network, you wont be able to receive calls or texts.
Hope this clarifies things.
Hello,
I am new to posting here, however I have been reading throughout the forums since I got my HTC PPC6800 in September through US Cellular. I have been through a few different custom roms and have never had any trouble. Then, yesterday after flashing to a winmo 6.5 rom, I lost the ability to connect to EVDO and I am stuck on 1x all the time. I switched back to Titan Reloaded v1.3.4 and still have the same issues. I also had changed my banner yesterday from CellSouth to US Cellular through QPST and I have since reloaded the file from when I read it with QPST before making changes.
Does anyone know of any issues that could cause this?
Thanks
Dave
Hey this might get you on the right track.
Did you use Debug(fieldtrial) (dialer code ##33284 call button) mode and look in the HDR tab and make sure it says you are authenticated? If not then you have to Re-Authenticate. That is done is PST (##778 call button). Follow my Cricket PST settings thread, (only the Part about re-authenticating) and use your US cellular values. Let me know if I have helped.
Just whatever you do, do not Use CRICKET settings for the Carrier you are using which is US CELLULAR
Have you checked your EPST settings to make sure they are correct? You might try running the uscc carrier cab. EVDO will not connect unless the EPST Security/MIP Profile settings are correct.
These were the settings I had to change for my phone to connect to EVDO: http://sites.google.com/site/victorbush/htc-6800-1/epst-data-settings
Its under EPST, goto Security, under HDR Username and password it needs to be as follow.
Find your ESN (In hex first)
HDR Username should be ESN(IN HEX)@uscc.net
HDR Password should be your ESN(IN HEX)
i.e.
ESN = 3C123456
HDR Username [email protected]
HDR Password 3C123456
(The ESN must be in CAPS)
PPP Username and password are based on phone #
i.e.
phone# = 1234567890
PPP Username = [email protected]
PPP Password = 1234567890
This bit me and several other people when USCC first launched EVDO
Also, mine has been changed from just flashing the rom, so you may need to fix this more than once.
Just an FYI.
BTC
THANKS
This method worked great (changing settings in EPST.) I thank you all for all the help!!!!
Thanks SOOOOOO MUCH!!! Without EVDO my phone is useless!\
Dave
wow thanks for all the responses. in actually using your rom ryan. i love it but i often wondered what that debug program was for....lol im gonna try that asap. i thought just flashing it with your rom would "magically" work. everything else has. what is the us cellular stuff ur talkinh about? do the rest of those comments that all the other great people who responded carry any weight with ur rom? is it even a rom specific issue? my phone does recognize the evdo signal but will not function untill it drops back to 1x just to clarify my issue. sorry it took so long to respond. i have been attempting to cook my own rom and im working on a 2d fix that is not a plugin. thanks everyone for the response. i appreciate all the help!
abadasstanker69 said:
wow thanks for all the responses. in actually using your rom ryan. i love it but i often wondered what that debug program was for....lol im gonna try that asap. i thought just flashing it with your rom would "magically" work. everything else has. what is the us cellular stuff ur talkinh about? do the rest of those comments that all the other great people who responded carry any weight with ur rom? is it even a rom specific issue? my phone does recognize the evdo signal but will not function untill it drops back to 1x just to clarify my issue. sorry it took so long to respond. i have been attempting to cook my own rom and im working on a 2d fix that is not a plugin. thanks everyone for the response. i appreciate all the help!
Click to expand...
Click to collapse
I am only responding to what is in BOLD above. That issue sounds like you need to Un-Authenticate and Re-Authenticate. If you are using Cricket it explains how to do that in my Cricket PST settings thread.
I currently do not have a US cellular version of my ROM. This thread was created by the Member "kwineon" only to find out why his EVDO was not working on his ROM for US cellular. We helped him fix his problem and then you come along asking questions that do not even apply to MY ROMs OR This Thread (with the exception of your EVDO issue)
If you are going to experiment do it at your own risk... I have cooked 4 carrier specific rom's (Cricket, Sprint, Verizon, Metro PCS) thats it buddy..
Some one PLEASE help i have tried to run several prl's including the 1007 i think it was anyhow (the latest 3g prl..) only 1x works for my raphael on cricket ...im getting frustrated... thanks
Wait... Cricket has 3G EVDO? No way... only seen there stuff work at 1x.
jnellz said:
Some one PLEASE help i have tried to run several prl's including the 1007 i think it was anyhow (the latest 3g prl..) only 1x works for my raphael on cricket ...im getting frustrated... thanks
Click to expand...
Click to collapse
You will only get 1x on a CDMA phone flashed to Cricket. They use a different band for their 3G that is not supported by Sprint / Verizon Phones .. It's a Cricket Thing.
THANKS SO MUCH thats what i figgured i just needed a second opinion DAMN! HTC FUZE
Here i come
Uh well, not true. Def not true. Im new to this flashing stuff, only on my second day. I purchased my vogue already flashed to cricket but it was VERY GENERIC. No touchflo, nothin, just windows 6.0 nothin else. It was getting evdo signals at that time, but i needed to reset some registry settings, which i did and was getting evdo signals with working internet and mms....THROUGH EVDO......NO BS THIS WAS JUST a day or 2 ago. But, problem was, i put touchflo on it, and didnt realize that the previous owner had somehow filled up the memory on the phone with applications and files that were nowhere to be found. It was crawling...So my solution.....? I decided to re-flash it myself because i knew that would delete all the useless stuff on the phone that i had no use for. I flashed the stock sprint rom from the htc website to get the most current radio, then unlocked the phone, then re-programmed it. When i got the phone it already had the 1050.prl file on it, which is an EVDO PRL!!! Go to corolada.com and look at the left side of the page and there is a list of EVDO AND NON EVDO CRICKET PRL's 1050 being the most universally recognized. Fast forward to now, I have finally found a rom that is fast and clean that i plan on keeping. Well now theres a whole nother problem. My phone is no longer recieving EVDO signals. BUT CRICKET HAS WORKING EVDO I KNOW FOR A FACT I have had so many cricket phones that connected to pic messaging and internet through evdo. Im sorry if i misunderstood your post and you were just saying that a flashed phone from sprint cant get evdo, but either way, i know for a fact that a flashed sprint phone is fully capable of sending and recieving cricket evdo signals because i was surfing the net on my vogue through cricket evdo just a day or two ago. Can anyone figure this out??? IVE tried reloading the prl. ive tried different prl's. ive even tried puttin the original sprint prl on the phone and then changing it back to the 1050 cricket prl, and to no avail, no evdo signals. someone please help, im pulling my hair out. why couldnt i just leave the phone alone when it had evdo? why did i have to go and try to make it pretty?????
sound like it's not authenticating ##DEBUG# ,debug info,"HDR" it should be 1=Athenticated
if not, ##778# , M.I.P Default profile, Delete AAA & HA shared secret & resest
jtmfnslim said:
sound like it's not authenticating ##DEBUG# ,debug info,"HDR" it should be 1=Athenticated
if not, ##778# , M.I.P Default profile, Delete AAA & HA shared secret & resest
Click to expand...
Click to collapse
HERES SOMETHING I GOT FROM "HOFO" that might help out some of u cricket people with PST setting issues/ hope this helps a lil:
==========================================================
CRICKET PST Settings Thread! by Ryan Mogul
This is for people who want Cricket to work perfectly, just follow these instructions not skipping a beat and you will be OK from then on! If you are not having problems obviously skip this!
This thread is assuming that you already have your phone Unlocked(spc code all zeros) It is also assuming that you already have a CRICKET PRL file loaded in PST. If you have my ROM flashed than PRL's are on device memory we will get to that below.
1. Now first thing you want to do is have a good Cricket ROM installed like "clears throat* Mine lol.
2. Now if you are starting from a fresh flash OK, if you are starting from a Hard reset OK, we can continue. If you have a ROM installed that is having problems I recommend a hard reset and skip customizations using stylus when it says you have 3 seconds.
3. Now open your Phone Application and go to options and make sure smart dial is off. Then dial ##778 call button, now click edit and enter six zeros. Now click view info and goto PRL, now check to make sure you have a CRICKET PRL(1013,1014,1050 etc.. there are others)If you dont have one loaded and you are using my ROM then you can click update and it should goto main root, pick prl 1050. Let it do its thing and restart. If you already have a CRICKET PRL then skip the update step.
4. Now cancel out of EPST if you didnt update PRL. (for both people who had to restart and people who didnt) <--open phone application again and dial *228(this will make sure base settings are good so i will not have to explain as much, it will also download a local EVDO prl to where you are), it will dial cricket and do its programming thing. Do not interupt this. Let it do its thing even if it restarts. Now when you are back in action we can continue.
5. Open phone application and dial ##778 call button, now click edit and enter six zeros. In main page the only two things we are going to do is change the NAM name to Cricket, and check the MSID number make sure its a 10 digit number thats in your area code BUT it IS NOT your PHONE NUMBER!! If its fine we can continue, if not you may of skipped the *228 step so you need to do that or you need to obtain this from calling Cricket.
6. Now click view info and goto AKEY and make sure its blank, nothing there. Now click view info and goto NAM settings, NAM name should be Cricket, Mobile Directory number should be YourTenDigitPhoneNumber, MIN1 should be that other phone number the (MSID) that is not your phone number! but it should be 7 digits, ex: sevendigitnumber, MIN2 should be just your area code. MSID should be 10digitMSIDnumber <--again not yourphonenumber!, MCC should be 310, MNC should be 00, NMSI should be your MSID(XX10digitnumber<--not your phone number) THE XX'S should be zeros, ex: 007185548692, Now if all these settings in this paragraph didnt need touched assuming you didnt skip any of my steps(which they shouldnt be touched i am just making sure) we can move on.
7. Click view info and goto CDMA settings, we are going to make sure they are set right and change a couple things for Clearer voice transmissions, people will compliment how good your phone sounds even in some cases. EVRC should be set at Disable, Home page should be Voice 13k, the Two below it the Same Voice 13k.
8. Click view info click modem settings, change slot cycle index to 1, This will make the phone ring a little sooner, also get your texts a bit sooner. The other 4 options should be Auto, Auto, Enable, No in Order from top to bottom.
9. Click View Info and pick Security, now we are changing this regardless you must do this, we are going to Unauthenticate you and Re-authenticate, it is a Needed step everything in this How To needs to be done and Not skipped! Change the HDR Auth User ID to something bogus like [email protected], the passord below it make it something random but remember it, now do the same for PPP user ID and password but make them the same as the HDR ones.
10. Click view info and pick MIP Settings, Make sure Active Profile is on 0, MIP mode should be Simple IP only, MIP reg retries should be 1, MIP reg retry timeout should be 2000 ms, MIP pre-reg timeout should be 30, Mobile Node HA auth should be Disable, send a reg request should be Enable, dormant handoff to disable.
11. Click view info and pick MIP Default Profile, Enable profile should be enable, NAI should be [email protected], MN HA SPI set should be enable, MN HA SPI value should be 12c, MN AAA should be enable, MN AAA SPI value should be 2, reverse tunneling should be enable, home address should be 0.0.0.0, Primary HA address should be 68.28.15.12, secondary should be 68.28.31.12, HA shared secret and AAA secret should be cricket <--lowercase, DMU public should be 0, MN Authenticator should be 0.
12. Click view info and pick MIP customer profile 1 and make sure its Profile enabled is disabled. Now do the same with the other 4 below it.
13. Ok now click menu, ok and let it reset, but make sure not to do anything we are going to be going right back INTO EPST, so when it boots back up open the Phone application and dial ##778, we are going to re-authenticate you its easy, now click edit and enter six zeros, click view info and goto Security, now change the HDR AN Auth to yourtendigi[email protected], password should be cricket<--lower case, same for PPP user id and Password make them same as HDR.
14. Click view info and goto MIP default profile, make sure the HA, and AAA shared secrets are both cricket<---lowercase, then click menu OK and let it reset.
Thats it! PST settings are perfect for CRICKET, you have a Local EVDO prl file installed, and you are Authenticated for Data and EVDO, now if you used my ROM just go to internet explorer and goto a real page, and follow instructions but remember to click save password!
Thats done, every flash from now on should never affect your PST settings and you should always be authenticated. I hope this helps everyone.
Cricket 3g network
I just got off the phone with cricket customer service. I wanted to upgrade to there 3g network. The representative said,"the 3g is reserved for original cricket phones.
it doesnt matter if you put a 3g prl on the cdma raphael because it is a dual band phone and crickets 3g network only works on their new triband phones so your still stuck with 1x and evdo