Any one help me my htc p3400i is not booting...only green and red key used to blink for a while and also when i am pressing the camera button then also the phone is not coming in tri color. Earlier it was coming but now its not coming only the keys used to blink,,so what to do now???
thanks
Pawan, dear, you got your phone working again or not?
Press camera power and soft reset will bring your phone to tri color screen. If your phone is back on its feet, please inform.
my device same problem its not booting, only blink red and green light, not coming tri color pls help us
hello friend i have same problem and i try with camara+power+soft reset but not come in tri color display
now what to do please help me
Thank you
Prakash
any help on this?
satanicsouls said:
any help on this?
Click to expand...
Click to collapse
What you were trying to do?
Or it was a sudden??
Plz give more information........
I was trying to flash my rom. which i did successfully on the first time. second time tried to flash with some file names htc-Asia something, it installed but ended up bricking my phone.
satanicsouls said:
I was trying to flash my rom. which i did successfully on the first time. second time tried to flash with some file names htc-Asia something, it installed but ended up bricking my phone.
Click to expand...
Click to collapse
Seems that you have flashed a wrong rom.Now you should go for J-TAG restore.
Can you tell me the procedure for the same. i rem readin that i will have to solder some stuff.. please guide through..
satanicsouls said:
Can you tell me the procedure for the same. i rem readin that i will have to solder some stuff.. please guide through..
Click to expand...
Click to collapse
Just use a valid ROM according to your handset.There are two versions of every ROM you'll find here(Old Gene and New GENE).Just select them carefully
gene is dead
one day i woke up to find my gene not getting switched on.
i had used it the night before and then put it for charging..
now only red light blinks in the led when i try to charge it nothing else.
i got the battery charged from outside but that also didnt work..
please help
I am unalbe to connect the USB, since it is not switching on. i have tried all possible ways to bring it back. cannot even enter bootloader mode. Please advise.
Related
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
can u turn it on or is it completely dead??
if not, try another battery
I need help from all of you
I can’t start xda that is a problem, is dead , battery it was around 75 % , I need help if know of to start aging after my mistake during upgrade I install old upgrade and it stop on 3 colors screen in I move a usb cable after that I can not start any more if you have any info which it can help I will appreciatively
Regards to all
remove the batterry for a days time and check the next day have tried the same and with success
ipl 2.10
spl 3.08
radio 2.19
os 2.20 jesterz
You should find an extra usb cable and expose the black and red wires. Plug the oposite end into the usb port on your computer, then hold the red wire on the positive end of the battery and put the black wire on the negative end of the battery. Do this for about 30 seconds then put your battery back into your phone. This will restart your battery.
real help
I don’t have problem with battery , battery is working OK , I test in other xda , I have problem with XDA , is dead during upgrade , I put wrong upgrade and it stop on 3 colours and I move I usb cable and after I can not start power on or rest . If anyone know how please reply
Regards to all
haveriii said:
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
Click to expand...
Click to collapse
Hi
Have u tried to force bootloader mode (the tri coloured screen),it is done, by pressing down the camera and while keeping it pressed,than press the power on button with other hand. It will switch on the device in bootloader mode( into the tri color screen) from there than flash the original Rom of ur carrier,which came pre-installed on the device or any other Official Rom from the same carrier.U can download official rom from ur carriers site.
Hope this will help and revive ur device.
secondly follow this excellent thread and read and ask for help there. Goodluck
http://forum.xda-developers.com/showthread.php?t=294107
help plz urgent
hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software
Can you enter bootloader? Hold the COMM manager button and soft reset.
@fardeen20
Please do not cross post the same thing in several threads. You have been answered alread. I have deleted the repeated posts for you. strike 1
Wow! There is a moderator for this forum!
Have you tried entering bootloader when the device is plugged into the charger? I know you say the battery works, but that doesn't mean the device can use the battery. Does the device do anything when plugged in or powered on?
dead prophet
im havin the same issue... my prophet wont even wake up... no power.. batt was more than 80% before flashed.. what can i do to get the power back..?? pls reply
Bootloader
Can someone post a picture of how the bootloader screen should look like?
I know it is a stupid question, but maybe that will help me solve my problem as well.
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
may help.
i need the tool for upgrading htc pm300
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Try taking the battery off for 24 hours.
then try to light it up...
Nadavi.
1:00AM will wait for 24 hours
kyborg said:
Hi,
I was flashing my i780 with i780_DXHC4_Rev12 and it got stuck at the phone part (after created COM successful), I took the battery out... and try to flash the Phone part again... the phone doesn't turn on at all, (fn+enter+power)... and even I try Power button only... still doesn't work... any help?
Click to expand...
Click to collapse
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
inertiax3 said:
Mine got stuck at the phone part because I didn't have the 64bit modem drivers for XP at hand .. (only 32bit..) .. yet the phone did turn on, only the phone part wasn't updated. No idea what happened in your case
Click to expand...
Click to collapse
Could you please upload or link me to all the correct modem drivers needed to flash the phone part?
Thanks,
Eran.
search the forum, it 's there
any other tips?
waited for 24 hours :| sill doesn' work
i have same trouble...when i upgrade the phone dead because batrey low..now the phone dead. please same body help....
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
amisui said:
i got same problem too.
my phone dead because i was upgrade rom with low battery.
please help us. thankyou
Click to expand...
Click to collapse
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
come on , can same body help us. !!!!!!! any sofware can flash i780 with dead position? i think the phone dead because not boot+rom+phone instaled. mirage updater only can flash in on condition.
nCoder said:
This happened to me several times...
Please do the following with a fully charged battery and not USB or charger connected :
toutch the battery contacts fast several times (it creates a small sparkle that you may not see) then press the start button. That should do the trick
Click to expand...
Click to collapse
Thank nCoder for your trick, i'll try to night
http://www.youtube.com/watch?v=XJ6l_sSHfec
http://www.youtube.com/watch?v=Fz2II5euldc
I follow you trick lick battery then press start (only start button / shift+enter and start)
but it not happend when i press start button.
what i was wrong?
best regard,
To Upgrade samsung i780
Hi i want samsung i780 firmware OS and it's procedure.
After ROM upload my HTC Hero show only some logo like device out of box. Nothing else is going. Button combinations for bootloader access is not working. Any ideas?
I managed to skilfully brick mine too, is a there a way to get it to boot up via key combination or using USB from a computer?
We are three now.
I know (presumably) my error: I flashed an SPL zip package that could be of the wrong type (Dream).
The boot shows the phone logo (mine says G2 T-Mobile).
The home keydown at boot doesn't work.
Is there a possibility to unbrick it?
Hope someone tells you how to unbrick it as I was about to do the update the ROM, not sure I want to do it now.
Right this is very weird as i had the same picture on my phone and thought it was bricked too..
BUT i just did a soft reset call menu end together. Then i did a hard reset as i wasnt sure if the soft one had done anything. Battery out then in and start up phone whilst holding down house and back key and then it started to boot up. So not sure if this helps anyone i doubt it as its very random but i thought id share just in case!!!
I had just flashed my radio when mine did this..
friend of mine had tha problem too, he had to send his device to htc.. 50 bucks ;-)
hmmm ... i am one of u guys now ...
no matter what key-combo i press, it just show a BOX and an arrow and a phone ... 3 sec later, phone turns off, no matter hwat key u press, it is not doing anything until u unplug the batery ... then when u turn it on, it repeat the same thing again
check if you can access fastboot via back+power when the phone is off. if so install recovery image and then install correct rom. if not i guess you're screwed, not sure though.
This guy
http://forum.xda-developers.com/showthread.php?t=556038
seemed to have the same issue and resolved it.
Hope it helps/good luck!
sonatbey said:
i bricked very bad no screen no logo not booting. anyway any helps
Click to expand...
Click to collapse
Please be more explicit as to what exactly you did.
(for someone to help you)
Hi, i got a SONY XPERIA ST21i so my problem is my phone is not starting when i try to on it. He just vibrates and the Notification LED blinks once in green colour. This problem started when i tryed to install CyanogenMod ... I all do step by step and stumbled on fastboot, when i unlock bootloader, then my phone stardet as always, with factory settings, and later i put boot.img in my phone, and then when i wanna turn on he just vibrates ant notification led blinks in green colour and screen just not show up. I think i got somthing like Brick ... Who can's help me ?
P.S. When i plug usb cable he automaticly turns intro flashmode. I'm trying to flash orginal firmware and is flashing and stops on "Reading phone inforation 0%"
Sorry for my english.
Lukosiukas said:
Hi, i got a SONY XPERIA ST21i so my problem is my phone is not starting when i try to on it. He just vibrates and the Notification LED blinks once in green colour. This problem started when i tryed to install CyanogenMod ... I all do step by step and stumbled on fastboot, when i unlock bootloader, then my phone stardet as always, with factory settings, and later i put boot.img in my phone, and then when i wanna turn on he just vibrates ant notification led blinks in green colour and screen just not show up. I think i got somthing like Brick ... Who can's help me ?
P.S. When i plug usb cable he automaticly turns intro flashmode. I'm trying to flash orginal firmware and is flashing and stops on "Reading phone inforation 0%"
Sorry for my english.
Click to expand...
Click to collapse
You have to use the search tools and find user who have the same problems. Use google and keywords. It can take time, be patient. When you are trying to modify a handset you must have another phone that you can use, as backup, you never know.
It would be a good idea to first post in a more apropriate forum like the one that matches your phone here on xda, you will find others to help.
I have been stuck for days with a bricked phone, I have used google and serach tools, now its all sorted.
Click thanks if you think this was helpfull.
Good luck.
vonz33 said:
You have to use the search tools and find user who have the same problems. Use google and keywords. It can take time, be patient. When you are trying to modify a handset you must have another phone that you can use, as backup, you never know.
It would be a good idea to first post in a more apropriate forum like the one that matches your phone here on xda, you will find others to help.
I have been stuck for days with a bricked phone, I have used google and serach tools, now its all sorted.
Click thanks if you think this was helpfull.
Good luck.
Click to expand...
Click to collapse
I searched about brick on St21i (tipo) and i don't find anything, maybe becose my phone is unpopular, I thought about to try type in XDA becose i think XDA is world-class forum...
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??