O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
can u turn it on or is it completely dead??
if not, try another battery
I need help from all of you
I can’t start xda that is a problem, is dead , battery it was around 75 % , I need help if know of to start aging after my mistake during upgrade I install old upgrade and it stop on 3 colors screen in I move a usb cable after that I can not start any more if you have any info which it can help I will appreciatively
Regards to all
remove the batterry for a days time and check the next day have tried the same and with success
ipl 2.10
spl 3.08
radio 2.19
os 2.20 jesterz
You should find an extra usb cable and expose the black and red wires. Plug the oposite end into the usb port on your computer, then hold the red wire on the positive end of the battery and put the black wire on the negative end of the battery. Do this for about 30 seconds then put your battery back into your phone. This will restart your battery.
real help
I don’t have problem with battery , battery is working OK , I test in other xda , I have problem with XDA , is dead during upgrade , I put wrong upgrade and it stop on 3 colours and I move I usb cable and after I can not start power on or rest . If anyone know how please reply
Regards to all
haveriii said:
O2 XDA model PM 300 dead during upgrade
I need help, my XDA is not running at all no sing of life , I try with holding camera and reset button nothing no sine ,
If anyone know how to start on or get into the tri-color screen , pls help
Regards
Click to expand...
Click to collapse
Hi
Have u tried to force bootloader mode (the tri coloured screen),it is done, by pressing down the camera and while keeping it pressed,than press the power on button with other hand. It will switch on the device in bootloader mode( into the tri color screen) from there than flash the original Rom of ur carrier,which came pre-installed on the device or any other Official Rom from the same carrier.U can download official rom from ur carriers site.
Hope this will help and revive ur device.
secondly follow this excellent thread and read and ask for help there. Goodluck
http://forum.xda-developers.com/showthread.php?t=294107
help plz urgent
hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software
Can you enter bootloader? Hold the COMM manager button and soft reset.
@fardeen20
Please do not cross post the same thing in several threads. You have been answered alread. I have deleted the repeated posts for you. strike 1
Wow! There is a moderator for this forum!
Have you tried entering bootloader when the device is plugged into the charger? I know you say the battery works, but that doesn't mean the device can use the battery. Does the device do anything when plugged in or powered on?
dead prophet
im havin the same issue... my prophet wont even wake up... no power.. batt was more than 80% before flashed.. what can i do to get the power back..?? pls reply
Bootloader
Can someone post a picture of how the bootloader screen should look like?
I know it is a stupid question, but maybe that will help me solve my problem as well.
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
may help.
i need the tool for upgrading htc pm300
Related
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
hi my friend my device is not respond i try to upgrade it but it is now black screen and i want to reflash it like any device
and i want to know how i can do that
please any one know
my device is
imate pocket pc phone
win se 1.72
and i want to know how i repaire it but you must know that i try to put in the crtadel but and reinstall but this is screen is appear to me
start aggain
what did you put in your rom?
first check everything
is the roms you try to update for your device?
it was power loss?
can you get it to bootloader if you can it will be back from the dead
check roms for country id errors
if you get it to bootloader and you dont get it to connect to you pc try another pc
ok thats it for now
my friend when i connected the power my device is not work how?! because when i put the battery in the device it gives me that no power in the device ,then i changed the battery but the problem still appear when i put the device in the cradel the red light becomes work but this happend when i put it without battery now when i put the battery the device turn off the red light and not give me any thing now i want to give the device power
how can i do that and how can i fix the screen that tell me that the device is not in the cradel this screen is apper for me my frindes
and when i press that buttons nothig happen i don't know waht but now i want to give the device the power how can i do that do you have any answer about that
hi my friends what can i do
hi where are you my friend what can i do
plesae why noboady replay for me
oh where are you
Did you try a hard reset? Please detail what happened exactly, from the beginning.
the first when i put the baterry in the i-mate pockt pc phone the red light is became off i don't know why if someone know the reason he can help me and i want to get the bootloader that is appear in the middel of the screen it called usb or serial because the screen is black i don't know waht i want to became on and i see the serial so can you help me my friend please
if you know how can i get the bootloader you will help me and how i turn on the screen my friend because it is became off and this is the reason
i hope you understand me because when i upgrade the device still work but when the extended rom is installed in the device i see (erasing the rom ) and after erasing the rom i have lose the power so the extended rom now is empty and the usb didn't read any thing by active syn and any other application so can you help me and i try to re-upgrade the processe is failing so i want to know ho can i turn on my device again
I was trying to update my WM5 to WM6 I have the G4 8125 , now it wont turn on I plugged it in to the charger port and the light that shows it's charging doesn’t even come on. Last night after I was trying to update it went completely blank, I tried to run the Official AT&T RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 and it wont even connect to my phone it gives me the connect error, every now and then last night it would show the boot loader screen but now its doing nothing someone HELP ME!!!!!!!!!!!! PLZZZ Does this mean my phone is bricked ???
brick is normal!
you should donate the brick to xda-developers now!
What you mean is normal ? is their anyway way i can get it fixed or is it just a paper weight now ?
probably runed out of battery. you should charge the battery in some way. try to power on the device while pressing camera button. it should show a boot loader screen. the you should flash a G4 SAFE ROM (with no spl/ipl) like "wizard love". if that doesnt help, sorry mate, you have a brick
are you able to enter bootloader?
hold down camera and either press power or reset button
No im not able to do anything on the phone lastnight it would go into bootloader randomly evey now and again but it isnt doing nothing now.
Ugh , i hope it is just the battery if it isnt then theirs nothing i can do for the phone unless i can get it in to bootloader mode right ?
your battery is dead...that's why you can't enter bootloader.
Moving to wizard G4.
Only the original charger is capable to charge your battery (it has a little bit more power), if it's fully charged... go into bootloader mode and install your official ROM the normal way.
It worked for me.
correct
im dealing with the same issue and my battery isnt dead
tasky smokey newbie bricks!! yomy !!
charly_mx said:
tasky smokey newbie bricks!! yomy !!
Click to expand...
Click to collapse
That's not very encouraging and nice thing to say.We all came here as newbies,not a big deal.
We all hate to see a guy loose his device like this,after all it's a developer's forum,we shud be atleast concerned and help out,if we can.
Hope you two be able to get your devices working again soon.
Good luck
Fixed
I just wanted to thank everyone for your help , i got my new battery in yesterday and my phone booted up flashed back to at&t orginal rom. Thank So Much.....
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
ayazero5 said:
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
Click to expand...
Click to collapse
try this :
Brick Test:
1. Make sure your device has ample battery charge. If you're not sure plug
it in with the wall charger for at least 10min
2. Remove your battery for at least 1 minute
3. Replace your battery while observing the LED lights
4. If the LED blinks once upon battery insertion, you might have hope yet
The only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader
screen)
Note: Failure to hold the buttons at the same time during battery insertion will cause it not to work.
good luck
@ knoxbrotherhood
yes, i can access the bootloader.. but i cant find the right ROM for my ATOM.
please go here for more advanced
http://forum.xda-developers.com/group.php?do=discuss&group=&discussionid=306
having a trouble? just post reply
thx man my atom died too
my piece of junk atom died last night aswell i followed your instructions now it installing windows 6.5
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
Plz help
the tri-color screen will still work.plug in your device to the charger or connect it to the computer.Then try going to the bootloader screen.
I had this issue once when i bought my Gene.it worked.else,you'll have to proceed with the J-Tag method or a better n safe option would be to get ur gene repaired from the service center or a near by mobile shop.
karan999 said:
the tri-color screen will still work.plug in your device to the charger or connect it to the computer.Then try going to the bootloader screen.
I had this issue once when i bought my Gene.it worked.else,you'll have to proceed with the J-Tag method or a better n safe option would be to get ur gene repaired from the service center or a near by mobile shop.
Click to expand...
Click to collapse
For Jtag a at least bootloder should be there in mobile, but my mobile didnt come at bootloader mode also. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens, even pressing camera and power button.
Its dead. Take it to service center.
first charge ur battery using any other mobile...
and then press ur camera button+power button.. it ll go to boot loader (tricolor) screen..
if u bring it to service center they ll say that its dead..
actually they dont wanna repair 3400 sets..
hey bro m getting that tri color screen but when m going to use rom update utility at last its telling error 200...
plzz get newer update tool.. how to get this ??
plzz solve it
Friend
get this file P3400 - 24 March 2007.exe then connect the USB cable cellular oprieno the button on the camera when the Patallo tricolor aparezaca run it may be the rpoblema slucione if a device htcp3400 old, HTCP dopood 3401 or d600 (old )
sorry fo my english
i am colombian
What file???
Please help us.
HLCMAD said:
What file???
Please help us.
Click to expand...
Click to collapse
24 March 2007.exe
filestube shearch
sorry for my english
if u have done with unlocking of the SPL then u cant install 24 march 2007.exe,coz it is original rom for htc......it will give u an error......! try to check your SPL address......if it 00H then its ok.....if its FFH then u need 2 try for J-TAG method....its very easy.....!